13 research outputs found
Immobilization of Polyoxometalates on Carbon Nanotubes: Tuning Catalyst Activity, Selectivity and Stability in H<sub>2</sub>O<sub>2</sub>-Based Oxidations
In recent years, carbon nanotubes (CNTs), including N-doped ones (N-CNTs), have received significant attention as supports for the construction of heterogeneous catalysts. In this work, we summarize our progress in the application of (N)-CNTs for immobilization of anionic metal-oxygen clusters or polyoxometalates (POMs) and use of (N)-CNTs-supported POM as catalysts for liquid-phase selective oxidation of organic compounds with the green oxidant–aqueous hydrogen peroxide. We discuss here the main factors, which favor adsorption of POMs on (N)-CNTs and ensure a quasi-molecular dispersion of POM on the surface and their strong attachment to the support. The effects of the POM nature, N-doping of CNTs, acid additives, and other factors on the POM immobilization process and catalytic activity/selectivity of the (N)-CNTs-immobilized POMs are analyzed. Particular attention is drawn to the critical issue of the catalyst stability and reusability. The scope and limitations of the POM/(N)-CNTs catalysts in H2O2-based selective oxidations are discussed
Ru Catalysts Supported on Bamboo-like N-Doped Carbon Nanotubes: Activity and Stability in Oxidizing and Reducing Environment
The catalysts with platinum-group metals on nanostructured carbons have been a very active field of research, but the studies were mainly limited to Pt and Pd. Here, Ru catalysts based on nitrogen-doped carbon nanotubes (N-CNTs) have been prepared and thoroughly characterized; Ru loading was kept constant (3 wt.%), while the degree of N-doping was varied (from 0 to 4.8 at.%) to evaluate its influence on the state of supported metal. Using the N-CNTs afforded ultrafine Ru particles (<2 nm) and allowed a portion of Ru to be stabilized in an atomic state. The presence of Ru single atoms in Ru/N-CNTs expectedly increased catalytic activity and selectivity in the formic acid decomposition (FAD) but had no effect in catalytic wet air oxidation (CWAO) of phenol, thus arguing against a key role of single-atom catalysis in the latter case. A remarkable difference between these two reactions was also found in regard to catalyst stability. In the course of FAD, no changes in the support or supported species or reaction rate were observed even at a high temperature (150 °C). In CWAO, although 100% conversions were still achievable in repeated runs, the oxidizing environment caused partial destruction of N-CNTs and progressive deactivation of the Ru surface by carbonaceous deposits. These findings add important new knowledge about the properties and applicability of Ru@C nanosystems
Nitrogen Doped Carbon Nanotubes and Nanofibers for Green Hydrogen Production: Similarities in the Nature of Nitrogen Species, Metal–Nitrogen Interaction, and Catalytic Properties
The effect of nitrogen doped bamboo-like carbon nanotubes (N–CNTs) on the properties of supported platinum (0.2 and 1 wt %) catalysts in formic acid decomposition for hydrogen production was studied. It was shown that both impregnation and homogeneous precipitation routes led to the formation of electron-deficient platinum stabilized by pyridinic nitrogen sites of the N–CNTs. The electron-deficient platinum species strongly enhanced the activity and selectivity of the Pt/N–CNTs catalysts when compared to the catalysts containing mainly metallic platinum nanoparticles. A comparison of bamboo-like N–CNTs and herring-bone nitrogen doped carbon nanofibers (N–CNFs) as the catalyst support allowed us to conclude that the catalytic properties of supported platinum are determined by its locally one-type interaction with pyridinic nitrogen sites of the N–CNTs or N–CNFs irrespective of substantial structural differences between nanotubes and nanofibers
Immobilization of Polyoxometalates on Carbon Nanotubes: Tuning Catalyst Activity, Selectivity and Stability in H2O2-Based Oxidations
In recent years, carbon nanotubes (CNTs), including N-doped ones (N-CNTs), have received significant attention as supports for the construction of heterogeneous catalysts. In this work, we summarize our progress in the application of (N)-CNTs for immobilization of anionic metal-oxygen clusters or polyoxometalates (POMs) and use of (N)-CNTs-supported POM as catalysts for liquid-phase selective oxidation of organic compounds with the green oxidant–aqueous hydrogen peroxide. We discuss here the main factors, which favor adsorption of POMs on (N)-CNTs and ensure a quasi-molecular dispersion of POM on the surface and their strong attachment to the support. The effects of the POM nature, N-doping of CNTs, acid additives, and other factors on the POM immobilization process and catalytic activity/selectivity of the (N)-CNTs-immobilized POMs are analyzed. Particular attention is drawn to the critical issue of the catalyst stability and reusability. The scope and limitations of the POM/(N)-CNTs catalysts in H2O2-based selective oxidations are discussed
Pd-Ceria/CNMs Composites as Catalysts for CO and CH<sub>4</sub> Oxidation
The application of composite materials as catalysts for the oxidation of CO and other toxic compounds is a promising approach for air purification. In this work, the composites comprising palladium and ceria components supported on multiwall carbon nanotubes, carbon nanofibers and Sibunit were studied in the reactions of CO and CH4 oxidation. The instrumental methods showed that the defective sites of carbon nanomaterials (CNMs) successfully stabilize the deposited components in a highly-dispersed state: PdO and CeO2 nanoparticles, subnanosized PdOx and PdxCe1−xO2−δ clusters with an amorphous structure, as well as single Pd and Ce atoms, are formed. It was shown that the reactant activation process occurs on palladium species with the participation of oxygen from the ceria lattice. The presence of interblock contacts between PdO and CeO2 nanoparticles has an important effect on oxygen transfer, which consequently affects the catalytic activity. The morphological features of the CNMs, as well as the defect structure, have a strong influence on the particle size and mutual stabilization of the deposited PdO and CeO2 components. The optimal combination of highly dispersed PdOx and PdxCe1−xO2−δ species, as well as PdO nanoparticles in the CNTs-based catalyst, makes it highly effective in both studied oxidation reactions
Pd-Ce-Ox/MWCNTs and Pt-Ce-Ox/MWCNTs Composite Materials: Morphology, Microstructure, and Catalytic Properties
The composite nanomaterials based on noble metals, reducible oxides, and nanostructured carbon are considered to be perspective catalysts for many useful reactions. In the present work, multi-walled carbon nanotubes (MWCNTs) were used for the preparation of Pd-Ce-Ox/MWCNTs and Pt-Ce-Ox/MWCNTs catalysts comprising the active components (6 wt%Pd, 6 wt%Pt, 20 wt%CeO2) as highly dispersed nanoparticles, clusters, and single atoms. The application of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) provided analysis of the samples’ morphology and structure at the atomic level. For Pd-Ce-Ox/MWCNTs samples, the formation of PdO nanoparticles with an average crystallite size of ~8 nm was shown. Pt-Ce-Ox/MWCNTs catalysts comprised single Pt2+ ions and PtOx clusters less than 1 nm. A comparison of the catalytic properties of the samples showed higher activity of Pd-based catalysts in CO and CH4 oxidation reactions in a low-temperature range (T50 = 100 °C and T50 = 295 °C, respectively). However, oxidative pretreatment of the samples resulted in a remarkable enhancement of CO oxidation activity of Pt-Ce-Ox/MWCNTs catalyst at T < 20 °C (33% of CO conversion at T = 0 °C), while no changes were detected for the Pd-Ce-Ox/MWCNTs sample. The revealed catalytic effect was discussed in terms of the capability of the Pt-Ce-Ox/MWCNTs system to form unique PtOx clusters providing high catalytic activity in low-temperature CO oxidation
Nitrogen Doped Carbon Nanotubes and Nanofibers for Green Hydrogen Production: Similarities in the Nature of Nitrogen Species, Metal–Nitrogen Interaction, and Catalytic Properties
Layered oxygen vacancy ordering in Nb-doped <tex>SrCo_{1-x}Fe_{x}O_{3-\delta}$</tex> perovskite
Layered oxygen vacancy ordering in Nb-doped SrCo 1Àx Fe x O 3Àd perovskite Solid oxide fuel cell / Perovskite / TEM / PED / Mixed ionic-electronic conductor
Abstract. The crystal structure of SrCo 0.7 Fe 0.2 Nb 0.1 O 2.72 was determined using a combination of precession electron diffraction (PED), high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and spatially resolved electron energy loss spectroscopy (STEM-EELS). The structure has a tetragonal P4/mmm symmetry with cell parameters a ¼ b ¼ a p , c ¼ 2a p (a p being the cell parameter of the perovskite parent structure). Octahedral BO 2 layers alternate with the anion-deficient BO 1.4 layers, the different B cations are randomly distributed over both layers. The specific feature of the SrCo 0.7 Fe 0.2 Nb 0.1 O 2.72 microstructure is a presence of extensive nanoscale twinning resulting in domains with alignment of the tetragonal c-axis along all three cubic direction of the perovskite subcell