Environmental Surveillance for Poliovirus and Other Enteroviruses: Long-Term Experience in Moscow, Russian Federation, 2004–2017

Polio and enterovirus surveillance may include a number of approaches, including incidence-based observation, a sentinel physician system, environmental monitoring and acute flaccid paralysis (AFP) surveillance. The relative value of these methods is widely debated. Here we summarized the results of 14 years of environmental surveillance at four sewage treatment plants of various capacities in Moscow, Russia. A total of 5450 samples were screened, yielding 1089 (20.0%) positive samples. There were 1168 viruses isolated including types 1−3 polioviruses (43%) and 29 different types of non-polio enteroviruses (51%). Despite using the same methodology, a significant variation in detection rates was observed between the treatment plants and within the same facility over time. The number of poliovirus isolates obtained from sewage was roughly 60 times higher than from AFP surveillance over the same time frame. All except one poliovirus isolate were Sabin-like polioviruses. The one isolate was vaccine-derived poliovirus type 2 with 17.6% difference from the corresponding Sabin strain, suggesting long-term circulation outside the scope of the surveillance. For some non-polio enterovirus types (e.g., Echovirus 6) there was a good correlation between detection in sewage and incidence of clinical cases in a given year, while other types (e.g., Echovirus 30) could cause large outbreaks and be almost absent in sewage samples. Therefore, sewage monitoring can be an important part of enterovirus surveillance, but cannot substitute other approaches

Synthesis and Properties of Ethylene/propylene and Ethylene/propylene/5-ethylidene-2-norbornene Copolymers Obtained on Rac-Et(2-MeInd)2ZrMe2/Isobutylaluminium Aryloxide Catalytic Systems

Ethylene/propylene (E/P) and ethylene/propylene/5-ethylidene-2-norbornene (E/P/ENB) copolymers were obtained on rac-Et(2-MeInd)2ZrMe2 activated by a number of isobutylaluminium aryloxides: (2,6-tBu2PhO-)AliBu2 (1-DTBP) (2,6-tBu2,4-Me-PhO-)AliBu2 (1-BHT), (2,4,6-tBu2PhO-)AliBu2 (1-TTBP), (2,6-tBu2,4-Me-PhO-)2AliBu (2-BHT), (2,6-tBu2PhO-)2AliBu (2-DTBP), [(2-Me,6-tBu-C6H3O)AliBu2]2 (1-MTBP), [(2,6-Ph2-PhO)AliBu2]2 (1-DPP). This study shows how the structure of an activator influences catalytic activity and polymer properties, such as the copolymer composition, molecular weight characteristics, and thermophysical and mechanical properties. It has been shown that both the introduction of a bulky substituent in the para-position of the aryloxy group and the additional aryloxy group in the structure of an activator lead to a significant decrease in activity of the catalytic system in all studied copolymerization processes. Moreover, activation by bulkier aryloxides leads to lower levels of comonomer insertion and gives rise to higher molecular weight polymers. Broad or multiple endothermic peaks with different values of melting points are observed on the DSC curves of the copolymers obtained with different catalytic systems. The DSC of the thermally fractionated samples makes it possible to reveal the heterogeneity of the copolymer microstructure, which manifests itself in the presence of a set of lamellar crystallites of different thickness. The results also present the mechanical properties of the copolymers, such as the tensile strength (σ), elongation at break (ε), and engineering strain (EL). The synthesized E/P and E/P/ENB copolymers contain about 1–4 wt.% of the sterically hindered phenols obtained in situ as a residue of the hydrolyzed activators in the course of reaction quenching. This determines the increased thermooxidative stability of the copolymers