Solid-State NaBH₄/Co Composite as Hydrogen Storage Material: Effect of the Pressing Pressure on Hydrogen Generation Rate

A solid-state NaBH4/Co composite has been employed as a hydrogen-generating material, as an alternative to sodium borohydride solutions, in the long storage of hydrogen. Hydrogen generation begins in the presence of cobalt-based catalysts, immediately after water is added to a NaBH4/Co composite, as a result of sodium borohydride hydrolysis. The hydrogen generation rate has been investigated as a function of the pressure used to press hydrogen-generating composites from a mechanical mixture of the hydride and cobalt chloride hexahydrate. The hydrogen generation rate was observed to increase with the increase of this pressure. Pre-reduction of the cobalt chloride, using a sodium borohydride solution, leveled this dependence with a two-fold decrease in the gas generation rate. According to TEM and XPS data, oxidation of the particles of the pre-reduced cobalt catalyst took place during preparation of the composites, and it is this oxidation that appears to be the main reason for its low activity in sodium borohydride hydrolysis

Solvent-Free Method for Nanoparticles Synthesis by Solid-State Combustion Using Tetra(Imidazole)Copper(II) Nitrate

The development of solvent-free techniques for nanoparticles synthesis is one of the challenges of Green chemistry. In this work, the principled opportunity to obtain copper-containing nanosized particles without use of any solvents was shown. The copper complexes were prepared as precursors by the melting-assisted solvent-free synthesis. The formation of tetra(imidazole)copper(II) nitrate complex was confirmed by XRD, elemental analysis, FTIR spectroscopy, and thermal analysis. It was noted that their thermal decomposition occurs in two stages: (I) the low-temperature step may be related to redox interaction between organic ligands and nitrate-anions; (II) the high-temperature step may be related to the oxidation of the products of incomplete imidazole decomposition. TEM and XRD studies of solid products of complex combustion have shown that they are oxides with particle size less than 40 nm. Thus, the combustion of [Cu(Im)4](NO3)2 complex under air can be considered as a new approach to prepare nanosized particles of copper oxides without the use of solvents

Solvent-Free Method for Nanoparticles Synthesis by Solid-State Combustion Using Tetra(Imidazole)Copper(II) Nitrate

The development of solvent-free techniques for nanoparticles synthesis is one of the challenges of Green chemistry. In this work, the principled opportunity to obtain copper-containing nanosized particles without use of any solvents was shown. The copper complexes were prepared as precursors by the melting-assisted solvent-free synthesis. The formation of tetra(imidazole)copper(II) nitrate complex was confirmed by XRD, elemental analysis, FTIR spectroscopy, and thermal analysis. It was noted that their thermal decomposition occurs in two stages: (I) the low-temperature step may be related to redox interaction between organic ligands and nitrate-anions; (II) the high-temperature step may be related to the oxidation of the products of incomplete imidazole decomposition. TEM and XRD studies of solid products of complex combustion have shown that they are oxides with particle size less than 40 nm. Thus, the combustion of [Cu(Im)4](NO3)2 complex under air can be considered as a new approach to prepare nanosized particles of copper oxides without the use of solvents

New Solvent-Free Melting-Assisted Preparation of Energetic Compound of Nickel with Imidazole for Combustion Synthesis of Ni-Based Materials

In this work two approaches to the synthesis of energetic complex compound Ni(Im)6(NO3)2 from imidazole and nicklel (II) nitrate were applied: a traditional synthesis from solution and a solvent-free melting-assisted method. According to infrared spectroscopy, X-ray diffraction, elemental and thermal analysis data, it was shown that the solvent-free melt synthesis is a faster, simpler and environmentally friendly method of Ni(Im)6(NO3)2 preparation. The results show that this compound is a promising precursor for the production of nanocrystalline Ni-NiO materials by air-assisted combustion method. The combustion of this complex together with inorganic supports makes it possible to synthesize supported nickel catalysts for different catalytic processes

Magnetically Recovered Co and Co@Pt Catalysts Prepared by Galvanic Replacement on Aluminum Powder for Hydrolysis of Sodium Borohydride

Magnetically recovered Co and Co@Pt catalysts for H2 generation during NaBH4 hydrolysis were successfully synthesized by optimizing the conditions of galvanic replacement method. Commercial aluminum particles with an average size of 80 µm were used as a template for the synthesis of hollow shells of metallic cobalt. Prepared Co0 was also subjected to galvanic replacement reaction to deposit a Pt layer. X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, and elemental analysis were used to investigate catalysts at each stage of their synthesis and after catalytic tests. It was established that Co0 hollow microshells show a high hydrogen-generation rate of 1560 mL·min−1·gcat−1 at 40 °C, comparable to that of many magnetic cobalt nanocatalysts. The modification of their surface by platinum (up to 19 at% Pt) linearly increases the catalytic activity up to 5.2 times. The catalysts prepared by the galvanic replacement method are highly stable during cycling. Thus, after recycling and washing off the resulting borate layer, the Co@Pt catalyst with a minimum Pt loading (0.2 at%) exhibits an increase in activity of 34% compared to the initial value. The study shows the activation of the catalyst in the reaction medium with the formation of cobalt–boron-containing active phases

CO₂ Methanation: Solvent-Free Synthesis of Nickel-Containing Catalysts from Complexes with Ethylenediamine

CO2 methanation was studied in the presence of nickel catalysts obtained by the solid-state combustion method. Complexes with a varying number of ethylenediamine molecules in the coordination sphere of nickel were chosen as the precursors of the active component of the catalysts. Their synthesis was carried out without the use of solvents, which made it possible to avoid the stages of their separation from the solution and the utilization of waste liquids. The composition and structure of the synthesized complexes were confirmed by elemental analysis, IR spectroscopy, powder XRD and XPS methods. It was determined that their thermal decomposition in the combustion wave proceeds in multiple stages with the formation of NiO and Ni(OH)2, which are reduced to Ni0. Higher ethylenediamine content in the complex leads to a higher content of metal in the solid products of combustion. However, different ratios of oxidized and reduced forms of nickel do not affect the initial activation temperature of nickel catalysts in the presence of CO2. It was noted that, after activation, the sample obtained from [Ni(C2H8N2)2](NO3)2 exhibited the highest activity in CO2 methanation. Thus, this complex is a promising precursor for CO2 methanation catalysts, and its synthesis requires only a small amount of ethylenediamine

Solvent-Free Synthesis of Nickel Nanoparticles as Catalysts for CO₂ Hydrogenation to Methane

The solid-state combustion method was used to prepare nickel-based catalysts for CO2 hydrogenation from [Ni(C3H4N2)6](NO3)2 and [Ni(C3H4N2)6](ClO4)2. These complexes were synthesized by adding nickel nitrate and perchlorate to melted imidazole. The composition and structure of the obtained complexes was confirmed by ATR FTIR, powder XRD, and elemental analysis. The stages of thermal decomposition of the complexes and their kinetic parameters were established. It was found that incomplete gasification of more thermostable Ni(C3H4N2)6](ClO4)2 led to the formation of carbon, nitrogen, and chlorine impurities. According to powder XRD and XPS, the solid products of gasification of both complexes consist of NiO and Ni0 covered with nickel hydroxide and/or a carbonate layer. In the case of the sample prepared from [Ni(C3H4N2)6](ClO4)2, this layer was pronounced. Therefore, it limits the nickel reduction in the reaction medium of CO2 hydrogenation, even at 450 °C. The surface of the sample prepared from [Ni(C3H4N2)6](NO3)2 contains nickel oxide, which is easily reduced. So, the catalyst active phase is already formed at 250 °C in the presence of CO2 and efficiently catalyzes CO2 hydrogenation as the temperature increases. Therefore, [Ni(C3H4N2)6](NO3)2 is a promising precursor for the CO2 hydrogenation catalyst, and its solvent-free synthesis follows Green Chemistry principles

The Use of Hybrid Genetic Algorithm in the Kinetic Analysis of Thermal Decomposition of [Ni(C₂H₈N₂)₃](ClO₄)₂ with Overlapping Stages

This work describes the mathematical modeling of the thermal decomposition of the complex compound [Ni(En)3](ClO4)2 (En = C2H8N2 = ethylenediamine) in an inert atmosphere under non-isothermal conditions. This process is characterized by several simultaneous and intense stages: elimination of ethylenediamine from the nickel coordination sphere, decomposition of perchlorate anions, and explosive-like oxidation of free or bound ethylenediamine. These stages overlap and merge into a one step on the differential thermogravimetric curve. Typically, this curve is modeled as a one-stage process during kinetic analysis. In this paper, for the first time, the data from the dynamic mass-spectral thermal analysis and thermogravimetric analysis were modeled using the hybrid genetic algorithm, and the results were compared. A two-stage scheme of [Ni(En)3](ClO4)2 thermolysis was proposed and the kinetic parameters for each stage were obtained. It was shown that the decomposition of [Ni(En)3](ClO4)2 begins with the elimination of one molecule of ethylenediamine (stage A), then the perchlorate anions quickly decompose with the evolution of oxygen (stage B). We believe that the resulting ClO4−x− (x = 1–3), as stronger oxidizing agents, instantly start an explosive-like exothermic process of ethylenediamine oxidation (stage B)

Catalytic Behavior of Iron-Containing Cubic Spinel in the Hydrolysis and Hydrothermolysis of Ammonia Borane

The paper presents a comparative study of the activity of magnetite (Fe3O4) and copper and cobalt ferrites with the structure of a cubic spinel synthesized by combustion of glycine-nitrate precursors in the reactions of ammonia borane (NH3BH3) hydrolysis and hydrothermolysis. It was shown that the use of copper ferrite in the studied reactions of NH3BH3 dehydrogenation has the advantages of a high catalytic activity and the absence of an induction period in the H2 generation curve due to the activating action of copper on the reduction of iron. Two methods have been proposed to improve catalytic activity of Fe3O4-based systems: (1) replacement of a portion of Fe2+ cations in the spinel by active cations including Cu2+ and (2) preparation of highly dispersed multiphase oxide systems, involving oxide of copper