83 research outputs found
Particle image velocimetry studies of bubble growth and detachment by high speed photography
An understanding of bubble flows is important in the design of process equipment, particularly in the chemical and power industries. In vapour-liquid processes the mass and heat transfer between the phases is dominated by the liquid-vapour interface and is determined by the number, size and shape of the bubbles. For bubble flows these characteristics are often controlled by the generation mechanisms and, since bubble flows are often generated at an orifice, it is important to determine the controlling parameters which dictate how bubbles grow and detach. For bubbles growing at orifices the liquid displacement is an important feature and affects the pressure distribution acting on the bubble and the heat and mass transfer that may occur at the bubble interface. Therefore, in this study, the characteristics of the liquid velocity field are studied experimentally using Particle Image Velocimetry (PIV) during growth, detachment and translation of a bubble being generated at an orifice supplied with a constant mass flow rate of air. The process is transient and occurs over a period of approximately 50 msecs. In order to map the transient flow field a combination of high speed cine and cross correlation PIV image processing has been used to determine the liquid velocity vector field during the bubble growth process. The paper contains details of the PIV technique and presents several of the velocity vector maps calculated
Measurement and simulation of the flow field around a triangular lattice meteorological mast
The international standard IEC 61400-12-1 âWind turbines â Part 12-1: Power performance measurements of electricity producing wind turbinesâ aims to provide a uniform methodology that will ensure consistency, accuracy and reproducibility in the measurement and analysis of power performance by wind turbines [1]. Annex G of this standard provides a methodology for the appropriate arrangement of instruments on the meteorological mast to ensure accurate measurement. For cup anemometers it provides recommendations about their location relative to the mast so that the effect of mast and boom interference on their output may be minimised. These recommendations are given for both tubular masts and lattice masts. This paper compares the flow distortion predicted by the IEC standard and the results of a 3D Computational Fluid Dynamics (CFD) simulation of a triangular lattice mast. Based on the results of wind tunnel and CFD simulation it was found that the flow distortion surrounding the lattice mast was over predicted by the method suggested in appendix G of IEC61400-12-1. Using the CFD data it was possible to determine, for a range of flow directions and mast heights, the distance from the mast that anemometers would need to be in order to be outside the flow distortion field
Feasibility study for estimating the offshore shear layer from on shore measurements
This paper presents an open source computational fluid dynamics (CFD) study of air flow over a complex terrain. The open source C++ toolbox OpenFOAM has been used for the CFD analysis and the terrain considered is a scale model of Berlengas Island, which lies close to the Portuguese coast. In order to validate the CFD model, experimental work has been carried out in an open-section wind tunnel using hot-wire anemometry to measure the wind profiles above the island. In the majority of cases, the OpenFOAM CFD solutions show very good agreement with the experimental wind profile data, confirming that open source CFD solutions are possible for environmental flows over complex terrain. Such an analysis demonstrates the feasibility of estimating offshore boundary layer effects from onshore measurements
Measurement and simulation of the flow field around a triangular lattice meteorological mast
The international standard IEC 61400-12-1 âWind turbines â Part 12-1: Power performance measurements of electricity producing wind turbinesâ aims to provide a uniform methodology that will ensure consistency, accuracy and reproducibility in the measurement and analysis of power performance by wind turbines. Annex G of this standard provides a methodology for the appropriate arrangement of instruments on the meteorological mast to ensure accurate measurement. For cup anemometers it provides recommendations about their location relative to the mast so that the effect of mast and boom interference on their output may be minimised. These recommendations are given for both tubular masts and lattice masts.This paper compares the flow distortion predicted by the IEC standard and the results of a 3D Computational Fluid Dynamics (CFD) simulation of a triangular lattice mast. Based on the results of wind tunnel and CFD simulation it was found that the flow distortion surrounding the lattice mast was over predicted by the method suggested in appendix G of IEC61400-12-1. Using the CFD data it was possible to determine, for a range of flow directions and mast heights, the distance from the mast that anemometers would need to be in order to be outside the flow distortion field
A CFD technique for estimating the flow distortion effects on LiDAR measurements when made in complex flow fields
The effect of flow distortion on the measurements produced by a LiDAR or SoDAR in close proximity to either complex terrain or a structure creating localised flow distortion is difficult to determine by analytical means. Also, as LiDARs and SoDARs are not point measurement devices, the techniques they employ for velocity measurements leads to complexities in the estimation of the effect of flow distortion on the accuracy of the measurements they make. This paper presents a method by which the effect of flow distortion on measurements made by a LiDAR in a distorted flow field may be determined using computational fluid dynamics. The results show that the error created by the flow distortion will cause the vector measured by a LiDAR to differ significantly from an equivalent point measurement. However, the results of the simulation show that, if the LiDAR is being used to measure the undisturbed flow field above a structure which creates highly localised flow distortion, the LiDAR results are less affected by the distortion of the local flow field than data acquired by a point measurement technique such as a cup anemometer
Two-beam lidar measurements in a non-homogeneous wind field
Nacelle based wind lidars are designed to sit atop a wind turbine structure and make measurements at given distances from it. Most times the lidar faces the turbineâs upstream direction to sense oncoming wind. Two lidars were set up looking upstream on two adjacent offshore turbines in Denmark. The case considered was for when the turbines were oriented such that one lidar was looking into the free stream while the other lidar had one beam in the first turbineâs wake and the other beam in near free stream conditions. This enabled the possibility to look at horizontal wind speeds reconstructed inside homogeneous and non-homogeneous wind fields. Data for the two lidars were processed and averaged over different intervals. Correlations of radial and horizontal wind speeds in different wind fields were performed. Results in this case show horizontal wind speeds reconstructed in non-homogeneous field similar to those reconstructed in a (assumed) homogeneous one
Diagnostic accuracy of 3.0-T magnetic resonance T1 and T2 mapping and T2-weighted dark-blood imaging for the infarct-related coronary artery in Non-ST-segment elevation myocardial infarction
Background: Patients with recent nonâSTâsegment elevation myocardial infarction commonly have heterogeneous characteristics that may be challenging to assess clinically.
Methods and Results: We prospectively studied the diagnostic accuracy of 2 novel (T1, T2 mapping) and 1 established (T2âweighted short tau inversion recovery [T2WâSTIR]) magnetic resonance imaging methods for imaging the ischemic area at risk and myocardial salvage in 73 patients with nonâSTâsegment elevation myocardial infarction (mean age 57±10 years, 78% male) at 3.0âT magnetic resonance imaging within 6.5±3.5 days of invasive management. The infarctârelated territory was identified independently using a combination of angiographic, ECG, and clinical findings. The presence and extent of infarction was assessed with late gadolinium enhancement imaging (gadobutrol, 0.1 mmol/kg). The extent of acutely injured myocardium was independently assessed with native T1, T2, and T2WâSTIR methods. The mean infarct size was 5.9±8.0% of left ventricular mass. The infarct zone T1 and T2 times were 1323±68 and 57±5 ms, respectively. The diagnostic accuracies of T1 and T2 mapping for identification of the infarctârelated artery were similar (P=0.125), and both were superior to T2WâSTIR (P<0.001). The extent of myocardial injury (percentage of left ventricular volume) estimated with T1 (15.8±10.6%) and T2 maps (16.0±11.8%) was similar (P=0.838) and moderately well correlated (r=0.82, P<0.001). Mean extent of acute injury estimated with T2WâSTIR (7.8±11.6%) was lower than that estimated with T1 (P<0.001) or T2 maps (P<0.001).
Conclusions: In patients with nonâSTâsegment elevation myocardial infarction, T1 and T2 magnetic resonance imaging mapping have higher diagnostic performance than T2WâSTIR for identifying the infarctârelated artery. Compared with conventional STIR, T1 and T2 maps have superior value to inform diagnosis and revascularization planning in nonâSTâsegment elevation myocardial infarction.
Clinical Trial Registration: URL: http://www.clinicaltrials.gov. Unique identifier: NCT02073422
Symbiotic Nitrogen Fixation and the Challenges to Its Extension to Nonlegumes
Access to fixed or available forms of nitrogen limits the productivity of crop plants and thus food production. Nitrogenous fertilizer production currently represents a significant expense for the efficient growth of various crops in the developed world. There are significant potential gains to be had from reducing dependence on nitrogenous fertilizers in agriculture in the developed world and in developing countries, and there is significant interest in research on biological nitrogen fixation and prospects for increasing its importance in an agricultural setting. Biological nitrogen fixation is the conversion of atmospheric N2 to NH3, a form that can be used by plants. However, the process is restricted to bacteria and archaea and does not occur in eukaryotes. Symbiotic nitrogen fixation is part of a mutualistic relationship in which plants provide a niche and fixed carbon to bacteria in exchange for fixed nitrogen. This process is restricted mainly to legumes in agricultural systems, and there is considerable interest in exploring whether similar symbioses can be developed in nonlegumes, which produce the bulk of human food. We are at a juncture at which the fundamental understanding of biological nitrogen fixation has matured to a level that we can think about engineering symbiotic relationships using synthetic biology approaches. This minireview highlights the fundamental advances in our understanding of biological nitrogen fixation in the context of a blueprint for expanding symbiotic nitrogen fixation to a greater diversity of crop plants through synthetic biology.Biotechnology and Biological Sciences Research Council (Great Britain) (Grants BB/L011484/1 and BB/L011476/1)National Science Foundation (U.S.) (Grant 1331098
The DECam Ecliptic Exploration Project (DEEP) II. Observational Strategy and Design
We present the DECam Ecliptic Exploration Project (DEEP) survey strategy
including observing cadence for orbit determination, exposure times, field
pointings and filter choices. The overall goal of the survey is to discover and
characterize the orbits of a few thousand Trans-Neptunian Objects (TNOs) using
the Dark Energy Camera (DECam) on the Cerro Tololo Inter-American Observatory
(CTIO) Blanco 4 meter telescope. The experiment is designed to collect a very
deep series of exposures totaling a few hours on sky for each of several 2.7
square degree DECam fields-of-view to achieve a magnitude of about 26.2 using a
wide VR filter which encompasses both the V and R bandpasses. In the first
year, several nights were combined to achieve a sky area of about 34 square
degrees. In subsequent years, the fields have been re-visited to allow TNOs to
be tracked for orbit determination. When complete, DEEP will be the largest
survey of the outer solar system ever undertaken in terms of newly discovered
object numbers, and the most prolific at producing multi-year orbital
information for the population of minor planets beyond Neptune at 30 au.Comment: 29 pages, 4 figures and 4 table
- âŠ