Monetary Policy and Nigeria’S Quest for Import-Substitution Industrialization

This study examines the impact of monetary policy variables on industrialization via import substitution strategy in Nigeria from 1981 – 2012. The deregulation of the foreign exchange market in Nigeria was with the aim of stimulating export and industrialization through import substitution. However, it turned out that Nigeria had become more import dependent than ever. We specified four explanatory variables for this study based on theoretical underpinnings. We sought to establish a relationship between the explanatory variables and industrial output. The Johansen trace test revealed that there was one cointegrating equation. The estimated error correction mechanism (ECM) revealed that 53 per cent of disequilibrium in industrial-GDP is corrected for in the long run. Keywords: Monetary policy, exchange rate, industrialization, imports substitution industrialization

The Effects of Eggshell Ash on Strength Properties of Cement-stabilized Lateritic

Eggshell ash obtained by incinerating Fowls’ eggshells to ash has been established to be a good accelerator for cement-bound materials and this would be useful for road construction work at the peak of rainy seasons for reducing setting time of stabilized road pavements. However this should be achieved not at the expense of other vital properties of the stabilized matrix. This is part of the effort in adding value to agricultural materials which probably cause disposal problems. Thus this study aimed at determining the effect of eggshell ash on the strength properties of cement-stabilized lateritic soil. The lateritic soil was classified to be A-6(2) in AASHTO rating system and reddish-brown clayey sand (SC) in the Unified Classification System. Constant cement contents of 6% and 8% were added to the lateritic soil with variations in eggshell ash content of 0% to 10% at 2% intervals. All proportions of cement and eggshell ash contents were measured in percentages by weight of the dry soil. The Compaction test, California Bearing Ratio test, Unconfined Compressive Strength test and Durability test were carried out on the soil-cement eggshell ash mixtures. The increase in eggshell ash content increased the Optimum Moisture Content but reduced the Maximum Dry Density of the soil-cement eggshell ash mixtures. Also the increase in eggshell ash content considerably increased the strength properties of the soil-cement eggshell ash mixtures up to 35% in the average but fell short of the strength requirements except the durability requirement was satisfied

Sources and Functionality of Rural Water Supply in Communities from three Senatorial Zones of Imo State, Nigeria

Sustainability of domestic water access in communities is essential for good health, society’s dignity and progress. This study investigated the sources and functionality of rural water supply in nine communities of three local government area (LGA) in three senatorial zones of Imo State, Nigeria using structured questionnaires. The questionnaires were administered on 100 women in each community. Data obtained were analysed using multivariate analysis of variance (MANOVA) to reveal the frequency of using the various sources of rural water supply, and Wilcoxon’s test for matched pairs to reveal the functionality status of the most frequently used water source. The findings indicate the importance of borehole water facilities in these rural communities and the necessity for intervention programs to strengthen their functionality in tandem with the State’s aspirations in achieving sustainable development goals

EVALUATION OF CHATTER VIBRATION FREQUENCY IN CNC TURNING OF 4340 ALLOY STEEL MATERIAL

In this study, an experimental investigation of chatter in CNC turning for 4340 Alloy Steel material was carried out. Empirical study of chatter and critical cutting condition in CNC turning has been conducted through a well- designed three-factor three-level experiment, and regression models developed for chatter frequency prediction with up to 99.5% accuracy for the material. The arising model and the mean-effect plots of the cutting speed, feed rate, and depth of cut against Signal-to-Noise (S/N) ratio indicates that increasing feed rates and depth of cuts would bring about increase in chatter vibration frequency while high cutting speeds would have attenuating effects on chatter vibration frequency, thereby suppressing it. The percentage contribution of the cutting parameters to chatter vibration frequency established, and optimal machining condition for the machine chatter optimization obtained at a cutting speed of 320 m/min, feed rate of 0.05mm/rev and depth of cut of 0.5mm. The optimal chatter vibration frequency for the turning tests was found to be 130.00 Hz. With the obtained optimum input parameters for chatter vibration frequency, production operations will be enhanced

Duration of Exposure and Mortality of Different Strains of Prostephanus truncatus (Horn) (Coleoptera: bostrichidae) Exposed to Bifenthrin Insecticide in the Laboratory

The length of exposure time to Bifenthrin on four strains of larger grain borer Prostephanus truncatus Horn (Coloeoptera: Bostrichidae) was studied in the laboratory at 28 -330C and 7

The Relationship between Selected Anthropometric Indices and Cardiorespiratory Fitness in Apparently Healthy Young Adults in a Nigerian Community

Background and Aim: Cardiorespiratory fitness (CRF) is a useful tool for establishment of baseline fitness status and monitoring of physical activity level. Therefore, it may by extension serve as health risk index. However, studies that have determined the correlation between anthropometric indices and CRF in apparently healthy young adults is difficult to find in other to preempt preventive actions before pathology develops. Materials and Methods: Using a descriptive correlational research design, 325 participants (160 males, 165 females) with mean age of 21.87±2.41 years were sampled. Tape measure, stop watch, metronome, sphygmomanometer, stethoscope, height meter, bathroom weighing scale, modified Borg’s exertion scale and step benches were used to obtain the blood pressure, heart rate, respiratory rate, rate of perceived exertion, height, weight, waist circumference and cardiorespiratory fitness was estimated using the mean heart rate responses of the participants. The data was summarized using frequency count, percentages, range, mean, standard deviation, Independent t-test and Pearson’s Product Moment Correlation at alpha level of 0.05. Results: CRF significantly correlated with post-test systolic blood pressure (p= 0.004), post-test diastolic blood pressure (p= 0.010) and resting heart rate (p= <0.0001) but not with BMI (p= 0.133), waist circumference (p= 0.098), pre-test systolic blood pressure (p= 0.155), pre-test diastolic blood pressure (p= 0.121), resting respiratory rate (p= 0.631), and respiratory rate recovery (p= 0.478). Conclusion: CRF can be used as an index to quantify in apparently healthy participants, level of cardiovascular and respiratory related disease risks. It is necessary to emphasize the importance of physical activity in order to improve one’s cardiorespiratory fitness and minimize the risk of cardiorespiratory associated diseases

Impact of Agricultural Waste on Sustainable Environment and Health of Rural Women

The study worked on the impact of agricultural waste on sustainable environment and health of rural women.  Three specific objectives were formulated for the study and included to identify the constituents of agricultural waste, to determine the environmental and health impact of agricultural waste and to determine the effective management techniques of agricultural wastes. Three research questions and three null hypotheses were also formulated in line with the specific objectives. Survey research design was adopted for the study. Population for the study was 3970 representing 450 registered livestock farmers, 3270 rural women and 250 environmental health workers in Anambra State.  Proportionate random sampling technique was used to draw a sample of 350 respondents representing 40 registered livestock farmers, 286 rural women and 24 environmental health workers. Questionnaire developed by the researchers was used to collect data. The instrument was face validated by three experts and reliability was tested using cronbach alpha method which yielded a coefficient of 0.86. Data were collected with the help of fifteen research assistants and 325 instruments were retrieved representing 81% return rate. Mean and Standard Deviation were used to answer the research questions while ANOVA was used to test the null hypotheses at 0.05 level of significance and at the appropriate degrees of freedom. Any null hypothesis whose p-value was greater than 0.05 level of significance at the appropriate degrees of freedom was upheld while a null hypothesis was rejected when the p-value was less than 0.05 level of significance at the appropriate degrees of freedom. The findings of the study indicated that animal faeces, urine, used litter, beddings, animal carcass, dairy parlor washings, waste milk, wasted feed, feedlot run-off, paunch waste, abattoir waste water, animal viscera, horns, feather, bones, blood, fur, placenta, birth tissues, fetal membranes, aborted fetus among others are the materials that constitute agricultural waste. It was also found that that air pollution from burning of agricultural wastes, air pollution from cesspools, dioxins from burning agricultural wastes, dirty environment from heaps of agricultural wastes, stench/odour from decaying agricultural waste, defacing of the environment, eutrophication of water bodies, aquatic life destruction, spontaneous abortion, blue-baby syndrome, prolonged mensuration and early menopause, among others are the environmental and health impact of agricultural waste on rural women. It was recommended among others that Extension workers should properly educate farmers on the dangers of agricultural wastes and sensitize them on proper disposal methods. Keywords: agricultural waste, environment, health, rural women, pollution

Screening of Locally Available Lemon Grass (Cymbopogon citratus) for Repellency Action against Aedes aegypti

In Nigeria, re-emergence of diseases caused by Aedes mosquito borne pathogens, and challenges associated with existing control tools occur. This necessitates an improved insecticide-based tool for use in Integrated Vector Management. So, repellent action of Cymbopogon citratus essential oil (EO) on Aedes aegypti (Linn.) was tested. The EO from C. citratus plant sourced from Awka, was extracted by hydro distillation, and the phytochemicals analyzed by Gas Chromatography-Mass Spectrometry. Repellent action of the EO on unfed Ae. aegypti was assessed using "WHO arm-in-cage" method. In triplicate, arms of human volunteers were treated with different concentrations (50.0, 25.0, 12.5, 6.25 and 3.125 % v/v) of the EO and submitted to 25-caged, unfed Ae. aegypti for 1 minute in every 30 minutes. β-cedrenes, kaempferol, and thujopsene dominated the 13 phytochemicals identified. The standard (Odomos®) and all EO concentrations recorded 100 % repellency on application. At 30 minutes, EC99.9 value was25.0 %, concentrations ≥ 62.5 % v/v gave 100 % repellency (p > 0.05). At 60 minutes, EC99.9 value was 30.68 %, concentrations ≥ 12.5 % v/v gave 100 % repellency (p > 0.05). At 90 to 120 minutes, 50 % concentration maintained 100 % repellency (p < 0.05), EC99.9 value was 48.79 % at 120 minutes. Recording 120 minutes protection time with no adverse effect, 50 % concentration showed equal potency as Odomos®. Research to isolate the active ingredients in the EO for incorporation into beneficial health and economic products is desirable.

Investigating the cyclic breaking of butyl-, methyland ethyl-biodiesel from waste vegetable oil using ultraviolet-visible spectrophotometry

The main advantage of biodiesel to fossil-diesel is attributed to the ester functional group in its structure. Many researchers have affirmed that the functional group assists the diesel engine to function at its peak. However, the efficiency of the biodiesel to keep the mechanical piston-strokes in the diesel engine is experimentally presumed low especially if the engine works for a long time. In this research, it was proposed that the cyclic break down of the ester functional group of biodiesel is a major disadvantage. Butanol, ethanol and methanol biodiesel were produced in the laboratory using waste vegetable oil from restaurant. The Ultraviolet-visible spectroscopy or spectrophotometer (UV–Vis) was used to investigate the cyclic break down in the Butyl-, Methyl- and Ethyl- biodiesel. The Ultraviolet-visible spectroscopy or spectrophotometer (UV–Vis) was used to probe the various biodiesel samples with a start and stop wavelength of 500 and 900 nm respectively. The wavelength interval was 1 nm at a high scanning speed. Between 500–550 and 800–850 nm, the Ethyl- and Butyl- biodiesel had an absorbance of 2.7 and 1.6 respectively with 3 peaks each. Methyl-biodiesel had the highest absorbance of 1.7 at 600–650 nm with 1 peak. The computational extrapolation of all outcomes affirms that cyclic breaking is highest in Butylbiodiesel. The most resilient biodiesel type was the Ethyl-biodiesel. However, it was recommended that cyclic breaking may be preserved by ratio-mixing of biodiesel with fossil-diesel