The Effect of Malrotation of Tibial Component of Total Knee Arthroplasty on Tibial Insert during High Flexion Using a Finite Element Analysis

One of the most common errors of total knee arthroplasty procedure is a malrotation of tibial component. The stress on tibial insert is closely related to polyethylene failure. The objective of this study is to analyze the effect of malrotation of tibial component for the stress on tibial insert during high flexion using a finite element analysis. We used Stryker NRG PS for analysis. Three different initial conditions of tibial component including normal, 15 ∘ internal malrotation, and 15 ∘ external malrotation were analyzed. The tibial insert made from ultra-high-molecular-weight polyethylene was assumed to be elastic-plastic while femoral and tibial metal components were assumed to be rigid. Four nonlinear springs attached to tibial component represented soft tissues around the knee. Vertical load was applied to femoral component which rotated from 0 ∘ to 135 ∘ while horizontal load along the anterior posterior axis was applied to tibial component during flexion. Maximum equivalent stresses on the surface were analyzed. Internal malrotation caused the highest stress which arose up to 160% of normal position. External malrotation also caused higher stress. Implanting prosthesis in correct position is important for reducing the risk of abnormal wear and failure

The Effect of Malrotation of Tibial Component of Total Knee Arthroplasty on Tibial Insert during High Flexion Using a Finite Element Analysis

One of the most common errors of total knee arthroplasty procedure is a malrotation of tibial component. The stress on tibial insert is closely related to polyethylene failure. The objective of this study is to analyze the effect of malrotation of tibial component for the stress on tibial insert during high flexion using a finite element analysis. We used Stryker NRG PS for analysis. Three different initial conditions of tibial component including normal, 15° internal malrotation, and 15° external malrotation were analyzed. The tibial insert made from ultra-high-molecular-weight polyethylene was assumed to be elastic-plastic while femoral and tibial metal components were assumed to be rigid. Four nonlinear springs attached to tibial component represented soft tissues around the knee. Vertical load was applied to femoral component which rotated from 0° to 135° while horizontal load along the anterior posterior axis was applied to tibial component during flexion. Maximum equivalent stresses on the surface were analyzed. Internal malrotation caused the highest stress which arose up to 160% of normal position. External malrotation also caused higher stress. Implanting prosthesis in correct position is important for reducing the risk of abnormal wear and failure

Distal Tibial Tuberosity Arc Osteotomy in Open-Wedge Proximal Tibial Osteotomy to Prevent Patella Infra

Open-wedge high tibial osteotomy is considered to be an effective surgical intervention for medial compartmental knee osteoarthritis. However, patella infra, which has been reported to be a result of tuberosity distalization after open-wedge high tibial osteotomy, changes the native patellofemoral biomechanics. This could raise abnormal patellofemoral contact stresses, which might be the trigger of patellofemoral arthrosis. To minimize the reduction in patellar height, we have developed a technique called open-wedge distal tuberosity tibial osteotomy. The benefits of this technique include increased bone-to-bone contact of the distal tuberosity cut surface after correction by cutting an arc osteotomy around the hinge position, which is the center of rotation. This technique also provides cortical support at the anterior osteotomy site without additional bone defect and, therefore, may be advantageous against weight-bearing stress on the osteotomy site. In all, open-wedge distal tuberosity tibial osteotomy could potentially be a unique open-wedge osteotomy that eliminates the risk for postoperative patellofemoral osteoarthritis and also could theoretically encourage rapid healing of the osteotomy, which could lead to early return to full physical activity