18 research outputs found
Improved ground-state modulation characteristics in 1.3 μm InAs/GaAs quantum dot lasers by rapid thermal annealing
We investigated the ground-state (GS) modulation characteristics of 1.3 μm InAs/GaAs quantum dot (QD) lasers that consist of either as-grown or annealed QDs. The choice of annealing conditions was determined from our recently reported results. With reference to the as-grown QD lasers, one obtains approximately 18% improvement in the modulation bandwidth from the annealed QD lasers. In addition, the modulation efficiency of the annealed QD lasers improves by approximately 45% as compared to the as-grown ones. The observed improvements are due to (1) the removal of defects which act as nonradiative recombination centers in the QD structure and (2) the reduction in the Auger-related recombination processes upon annealing
Investigation of Semiconductor Quantum Dots for Waveguide Electroabsorption Modulator
In this work, we investigated the use of 10-layer InAs quantum dot (QD) as active region of an electroabsorption modulator (EAM). The QD-EAM is a p-i-n ridge waveguide structure with intrinsic layer thickness of 0.4 μm, width of 10 μm, and length of 1.0 mm. Photocurrent measurement reveals a Stark shift of ~5 meV (~7 nm) at reverse bias of 3 V (75 kV/cm) and broadening of the resonance peak due to field ionization of electrons and holes was observed for E-field larger than 25 kV/cm. Investigation at wavelength range of 1,300–1320 nm reveals that the largest absorption change occurs at 1317 nm. Optical transmission measurement at this wavelength shows insertion loss of ~8 dB, and extinction ratio of ~5 dB at reverse bias of 5 V. Consequently, methods to improve the performance of the QD-EAM are proposed. We believe that QDs are promising for EAM and the performance of QD-EAM will improve with increasing research efforts
Mode-locked quantum-dot lasers
Semiconductor lasers are convenient and compact sources of light, offering highly efficient operation, direct electrical control and integration opportunities. In this review we describe how semiconductor quantum-dot structures can provide an efficient means of amplifying and generating ultrafast (of the order of 100 fs), high-power and low-noise optical pulses, with the potential to boost the repetition rate of the pulses to beyond 1 THz. Such device designs are opening up new possibilities in ultrafast science and technology.</p