Friedel’s Salt and Hydrotalcite – Layered Double Hydroxides and the Protection against Chloride Induced Corrosion

This paper discusses some aspects of corrosion protection that fly ash and GGBFS offer to steel reinforcement in concrete. It focuses on the formation of two types of Layered Double Hydroxides (LDH’s). These are Friedel’s salt and Hydrotalcite. While Friedel’s salt is known to form in fly ash blends, the authors support the evidence of hydrotalcite formation in GGBFS blends as a result of the magnesium content in the slag. The paper discusses the corrosion protection performance of GGBFS concrete and compares it to that of fly ash concrete. The paper shows the superior advantage of including GGBFS for corrosion protection. The authors explored the probable reasons for this significant advantage and relate it to the formation of hydrotalcite in GGBFS concretes

Nano-bioceramic synthesis from tropical sea snail shells (Tiger Cowrie - Cypraea Tigris) with simple chemical treatment

In this study several bioceramic materials (i.e. hydroxyapatite, whitlockite) were prepared by using chemical synthesis method from sea snail shells (Tiger Cowrie - Cypraea Tigris), originated from Pacific Ocean. Marine shells usually present aragonite-calcite structures and generally, complicated and pressurized equipment is necessary to convert these structures into bioceramics. Instead of using complicated systems, a basic ultrasonic equipment and simple chemical synthesis method was used in the process. DTA analysis was performed to calculate the required amount of H3PO4 solution in order to set the appropriate stoichiometric ratio of Ca/P equal to 1.667 for HA bioceramic or to 1.5 for β-TCP bioceramic in the titration. The prepared batches were sintered at 800°C and 400 °C for hydroxyapatite (HA) and β-tri calcium phosphate (β-TCP) forms respectively. X-ray diffraction analysis, scanning electron microscopy (SEM) and infrared observations (FTIR) were implemented for both TCP and HA bioceramics. By applying the chemical synthesis with basic ultrasonic equipment, this study proposes a simple way of production for nano-HA/TCP powders from a natural marine sources

Absence of MERS-CoV antibodies in feral camels in Australia: Implications for the pathogen's origin and spread

Middle East respiratory syndrome coronavirus (MERS-CoV) infections continue to be a serious emerging disease problem internationally with well over 1000 cases and a major outbreak outside of the Middle East region. While the hypothesis that dromedary camels are the likely major source of MERS-CoV infection in humans is gaining acceptance, conjecture continues over the original natural reservoir host(s) and specifically the role of bats in the emergence of the virus. Dromedary camels were imported to Australia, principally between 1880 and 1907 and have since become a large feral population inhabiting extensive parts of the continent. Here we report that during a focussed surveillance study, no serological evidence was found for the presence of MERS-CoV in the camels in the Australian population. This finding presents various hypotheses about the timing of the emergence and spread of MERS-CoV throughout populations of camels in Africa and Asia, which can be partially resolved by testing sera from camels from the original source region, which we have inferred was mainly northwestern Pakistan. In addition, we identify bat species which overlap (or neighbour) the range of the Australian camel population with a higher likelihood of carrying CoVs of the same lineage as MERS-CoV. Both of these proposed follow-on studies are examples of "proactive surveillance", a concept that has particular relevance to a One Health approach to emerging zoonotic diseases with a complex epidemiology and aetiology

Superconducting Transition Temperature in Heterogeneous Ferromagnet-Superconductor Systems

We study the shift of the the superconducting transition temperature $T_c$ in ferromagnetic-superconducting bi-layers and in a superconducting film supplied a square array of ferromagnetic dots. We find that the transition temperature in these two cases change presumably in opposite direction and that its change is not too small. We extend these results to multilayer structures. We predict that rather small external magnetic field $\sim 10$ Oe can change the transition temperature of the bilayer by 10% .Comment: 9 pages, 2 figure

Magnetic Properties of 2-Dimensional Dipolar Squares: Boundary Geometry Dependence

By means of the molecular dynamics simulation on gradual cooling processes, we investigate magnetic properties of classical spin systems only with the magnetic dipole-dipole interaction, which we call dipolar systems. Focusing on their finite-size effect, particularly their boundary geometry dependence, we study two finite dipolar squares cut out from a square lattice with $\Phi=0$ and $\pi/4$, where $\Phi$ is an angle between the direction of the lattice axis and that of the square boundary. Distinctly different results are obtained in the two dipolar squares. In the $\Phi=0$ square, the ``from-edge-to-interior freezing'' of spins is observed. Its ground state has a multi-domain structure whose domains consist of the two among infinitely (continuously) degenerated Luttinger-Tisza (LT) ground-state orders on a bulk square lattice, i.e., the two antiferromagnetically aligned ferromagnetic chains (af-FMC) orders directed in parallel to the two lattice axes. In the $\Phi=\pi/4$ square, on the other hand, the freezing starts from the interior of the square, and its ground state is nearly in a single domain with one of the two af-FMC orders. These geometry effects are argued to originate from the anisotropic nature of the dipole-dipole interaction which depends on the relative direction of sites in a real space of the interacting spins.Comment: 21 pages, 13 figures, submitted to Journal of Physical Society Japa

Photonics and fracture toughness of heterogeneous composite materials

Fracture toughness measures the resistance of a material to fracture. This fundamental property is used in diverse engineering designs including mechanical, civil, materials, electronics and chemical engineering applications. In spite of the advancements made in the past 40 years, the evaluation of this remains challenging for extremely heterogeneous materials such as composite concretes. By taking advantage of the optical properties of a thin birefringent coating on the surface of opaque, notched composite concrete beams, here we sense the evolution of the maximum shear stress distribution on the beams under loading. The location of the maximum deviator stress is tracked ahead of the crack tip on the experimental concrete samples under the ultimate load, and hence the effective crack length is characterised. Using this, the fracture toughness of a number of heterogeneous composite beams is evaluated and the results compare favourably well with other conventional methods using combined experimental and numerical/analytical approaches. Finally a new model, correlating the optically measured shear stress concentration factor and flexural strength with the fracture toughness of concretes is proposed. The current photonics-based study could be vital in evaluating the fracture toughness of even opaque and complex heterogeneous materials more effectively in future

Extraction and Characterization of Microplastics from Organic Solid Matrices and their Remediation

Plastics have become an essential commodity due to their superior engineering properties, durability and low cost to be used by a wide range of commercial products. However, the degradation of plastics due to mechanical, chemical, biological, and photolytic stresses has led to the formation of microplastics (MPs). MPs have risen to the top of environmental concerns due to their affinity to pollute the environment, and to pass to the food chain, threatening human health. In this context, attempts have been made to extract and characterize MPs from aqueous and solid matrices. A problem that not only hampers research but also regulatory decisions is the variety of methods used for the extraction and characterization of MPs, especially in organic solid matrices (OSMs) with organic (OM) \u3e 5%, making the comparison of results difficult. This paper aims to address this need, by critically assessing the methodologies and protocols used for extraction of MPs from OSMs, which includes sample collection, dispersion, OM removal, and separation, as well as the qualitative and quantitative characterization of MPs. Further, current impediments in the accurate characterization of MPs are identified along with recommendations for future developments. Finally, recent efforts by various countries to legislate against certain sources of MPs, as well as issues and novel techniques to remediate MPs from the soil, and wastewater have been highlighted

Design and baseline characteristics of the finerenone in reducing cardiovascular mortality and morbidity in diabetic kidney disease trial

Background: Among people with diabetes, those with kidney disease have exceptionally high rates of cardiovascular (CV) morbidity and mortality and progression of their underlying kidney disease. Finerenone is a novel, nonsteroidal, selective mineralocorticoid receptor antagonist that has shown to reduce albuminuria in type 2 diabetes (T2D) patients with chronic kidney disease (CKD) while revealing only a low risk of hyperkalemia. However, the effect of finerenone on CV and renal outcomes has not yet been investigated in long-term trials. Patients and Methods: The Finerenone in Reducing CV Mortality and Morbidity in Diabetic Kidney Disease (FIGARO-DKD) trial aims to assess the efficacy and safety of finerenone compared to placebo at reducing clinically important CV and renal outcomes in T2D patients with CKD. FIGARO-DKD is a randomized, double-blind, placebo-controlled, parallel-group, event-driven trial running in 47 countries with an expected duration of approximately 6 years. FIGARO-DKD randomized 7,437 patients with an estimated glomerular filtration rate >= 25 mL/min/1.73 m(2) and albuminuria (urinary albumin-to-creatinine ratio >= 30 to <= 5,000 mg/g). The study has at least 90% power to detect a 20% reduction in the risk of the primary outcome (overall two-sided significance level alpha = 0.05), the composite of time to first occurrence of CV death, nonfatal myocardial infarction, nonfatal stroke, or hospitalization for heart failure. Conclusions: FIGARO-DKD will determine whether an optimally treated cohort of T2D patients with CKD at high risk of CV and renal events will experience cardiorenal benefits with the addition of finerenone to their treatment regimen. Trial Registration: EudraCT number: 2015-000950-39; ClinicalTrials.gov identifier: NCT02545049