Dynamics of silver elution from functionalised antimicrobial nanofiltration membranes

In an effort to mitigate biofouling on thin film composite membranes such as nanofiltration and reverse osmosis, a myriad of different surface modification strategies has been published. The use of silver nanoparticles (Ag-NPs) has emerged as being particularly promising. Nevertheless, the stability of these surface modifications is still poorly understood, particularly under permeate flux conditions. Leaching or elution of Ag-NPs from the membrane surface can not only affect the antimicrobial characteristics of the membrane, but could also potentially present an environmental liability when applied in industrial-scale systems. This study sought to investigate the dynamics of silver elution and the bactericidal effect of an Ag-NP functionalised NF270 membrane. Inductively coupled plasma-atomic emission spectroscopy was used to show that the bulk of leached silver occurred at the start of experimental runs, and was found to be independent of salt or permeate conditions used. Cumulative amounts of leached silver did, however, stabilise following the initial release, and were shown to have maintained the biocidal characteristics of the modified membrane, as observed by a higher fraction of structurally damaged Pseudomonas fluorescens cells. These results highlight the need to comprehensively assess the time-dependent nature of bactericidal membranes

Understanding the Mechanisms of Biofouling on Nanofiltration Membranes: Effect of the Biofilm Structure on Solute Removal

Abstractdjskj,mnckl

Impacts of wet market modernization levels and hygiene practices on the microbiome and microbial safety of wooden cutting boards in Hong Kong

Accessing food through wet markets is a common global daily occurrence, where fresh meat can be purchased to support an urbanizing world population. Similar to the wet markets in many other metropolitan cities in Asia, Hong Kong wet markets vary and are characterized by differing hygiene routines and access to essential modern technologies. The lack of risk assessments of food contact surfaces in these markets has led to substantial gaps in food safety knowledge and information that could help improve and maintain public health. Microbial profiling analyses were conducted on cutting boards that had been used to process pork, poultry, and seafood at 11 different wet markets. The markets differed in hygiene protocols and access to modern facilities. Irrespective of whether wet markets have access of modern infrastructure, the hygiene practices were largely found to be inefficient based on the prevalence of bacterial species typically associated with foodborne pathogens such as Campylobacter fetus, Clostridium perfringens, Staphylococcus aureus, and Vibrio parahaemolyticus; indicator organisms such as Escherichia coli; as well as nonfoodborne pathogenic bacterial species potentially associated with nosocomial infections, such as Klebsiella pneumoniae and Enterobacter cloacae. Other Vibrio species, V. parahaemolyticus and V. vulnificus, typically associated with contaminated raw or undercooked seafood with the potential to cause illness in humans, were also found on wooden cutting boards. This study indicated that the hygienic practices used in Hong Kong wet markets are not sufficient for preventing the establishment of spoilage or pathogenic organisms. This study serves as a basis to review current hygiene practices in wet markets and provides a framework to reassess existing safety protocols

Questioning the source of identified non-foodborne pathogens from food-contact wooden surfaces used in Hong Kong's urban wet markets

In this study, a phylogenic analysis was performed on pathogens previously identified in Hong Kong wet markets' cutting boards. Phylogenetic comparisons were made between phylotypes obtained in this study and environmental and clinical phylotypes for establishing the possible origin of selected bacterial species isolated from wet market cutting board ecosystems. The results reveal a strong relationship between wet market bacterial assemblages and environmental and clinically relevant phylotypes. However, our poor knowledge of potential cross-contamination sources within these wet markets is further exacerbated by failing to determine the exact or presumed origin of its identified pathogens. In this study, several clinically relevant bacterial pathogens such as Klebsiella pneumoniae, Streptococcus suis and Streptococcus porcinus were linked to cutting boards associated with pork; Campylobacter fetus, Staphylococcus aureus, Escherichia coli, and A. caviae in those associated with poultry; and Streptococcus varanii, A. caviae, Vibrio fluvialis, and Vibrio parahaemolyticus in those associated with seafood. Identifying non-foodborne clinically relevant pathogens in wet market cutting boards in this study confirms the need for safety approaches for wet market meat, including cold storage. The presented study justifies the need for future systematic epidemiological studies to determine identified microbial pathogens. Such studies should bring about significant improvements in the management of hygienic practices in Hong Kong's wet markets and work towards a One Health goal by recognizing the importance of wet markets as areas interconnecting food processing with animal and clinical environments

Living biointerfaces based on non-pathogenic bacteria to direct cell differentiation

Genetically modified Lactococcus lactis, non-pathogenic bacteria expressing the FNIII7-10 fibronectin fragment as a protein membrane have been used to create a living biointerface between synthetic materials and mammalian cells. This FNIII7-10 fragment comprises the RGD and PHSRN sequences of fibronectin to bind α5β1 integrins and triggers signalling for cell adhesion, spreading and differentiation. We used L. lactis strain to colonize material surfaces and produce stable biofilms presenting the FNIII7-10 fragment readily available to cells. Biofilm density is easily tunable and remains stable for several days. Murine C2C12 myoblasts seeded over mature biofilms undergo bipolar alignment and form differentiated myotubes, a process triggered by the FNIII7-10 fragment. This biointerface based on living bacteria can be further modified to express any desired biochemical signal, establishing a new paradigm in biomaterial surface functionalisation for biomedical applications

A Physical Impact of Organic Fouling Layers on Bacterial Adhesion During Nanofiltration

Organic conditioning films have been shown to alter properties of surfaces, such as hydrophobicity and surface free energy. Furthermore, initial bacterial adhesion has been shown to depend on the conditioning film surface properties as opposed to the properties of the virgin surface. For the particular case of nanofiltration membranes under permeate flux conditions, however, the conditioning film thickens to form a thin fouling layer. This study hence sought to determine if a thin fouling layer deposited on a nanofiltration membrane under permeate flux conditions governed bacterial adhesion in the same manner as a conditioning film on a surface. Thin fouling layers (less than 50 μm thick) of humic acid or alginic acid were formed on Dow Filmtec NF90 membranes and analysed using Atomic Force Microscopy (AFM), confocal microscopy and surface energy techniques. Fluorescent microscopy was then used to quantify adhesion of Pseudomonas fluorescens bacterial cells onto virgin or fouled membranes under filtration conditions.It was found that instead of adhering on or into the organic fouling layer, the bacterial cells penetrated the thin fouling layer and adhered directly to the membrane surface underneath. Contrary to what surface energy measurements of the fouling layer would indicate, bacteria adhered to a greater extent onto clean membranes (24 ± 3% surface coverage) than onto those fouled with humic acid (9.8 ± 4%) or alginic acid (7.5 ± 4%). These results were confirmed by AFM measurements which indicated that a considerable amount of energy (10−7 J/μm) was dissipated when attempting to penetrate the fouling layers compared to adhering onto clean NF90 membranes (10−15 J/μm). The added resistance of this fouling layer was thusly seen to reduce the number of bacterial cells which could reach the membrane surface under permeate conditions. This research has highlighted an important difference between fouling layers for the particular case of nanofiltration membranes under permeate flux conditions and surface conditioning films which should be considered when conducting adhesion experiments under filtration conditions. It has also shown AFM to be an integral tool for such experiments.Science Foundation IrelandEuropean Research Counci

Upon impact: the fate of adhering <i>Pseudomonas fluorescens</i> cells during Nanofiltration

Nanofiltration (NF) is a high-pressure membrane filtration process increasingly applied in drinking water treatment and water reuse processes. NF typically rejects divalent salts, organic matter, and micropollutants. However, the efficiency of NF is adversely affected by membrane biofouling, during which microorganisms adhere to the membrane and proliferate to create a biofilm. Here we show that adhered Pseudomonas fluorescens cells under high permeate flux conditions are met with high fluid shear and convective fluxes at the membrane-liquid interface, resulting in their structural damage and collapse. These results were confirmed by fluorescent staining, flow cytometry, and scanning electron microscopy. This present study offers a 'first-glimpse' of cell damage and death during the initial phases of bacterial adhesion to NF membranes and raises a key question about the role of this observed phenomena during early-stage biofilm formation under permeate flux and cross-flow conditions.European Research Council (ERC

Nanofiltration-induced cell death: An integral perspective of early stage biofouling under permeate flux conditions

The performance of pressure-driven membrane filtration processes for water treatment is hampered by biofouling. A relevant, but often overlooked aspect of this phenomenon concerns the localized microenvironment at the membrane interface. A key question is the level of stress on adhering cells and how this impacts on the developing biofilm. In this study, Pseudomonas fluorescens biofilms were monitored after 1, 2 and 7-day cross-flow nanofiltration experiments using confocal microscopy with live/dead staining which enabled analysis of both biofilm structure and the spatial localization of dead versus live cells. A significant increased level of biomass at low- compared to high-flux conditions (2-day experiments) suggested hindrance of bacterial proliferation at higher fluxes. An increase in live cell fractions was generally observed between 24- and 48-h at low flux conditions (3 bar), while the fraction of dead/injured cells remained constant during that same period. At higher flux conditions (15 bar), the volume of live cell fractions remained constant over 24- and 48-h experiments. The implications of these findings point to the need to reevaluate classical contact-killing strategy for controlling membrane fouling; initial membrane fouling events are characterized by an initially-induced cell death stage followed by an adaptation period through which surviving cells are able to acclimatize in their respective environments. This study emphasizes the need to better understand the role of operating parameters and its resulting cell death during early stage fouling. It is in this context that fouling management strategies can be further developed