Photonic-crystal nano-photodetector with ultrasmall capacitance for on-chip light-to-voltage conversion without an amplifier

The power consumption of a conventional photoreceiver is dominated by that of the electric amplifier connected to the photodetector (PD). An ultralow-capacitance PD can overcome this limitation, because it can generate sufficiently large voltage without an amplifier when combined with a high-impedance load. In this work, we demonstrate an ultracompact InGaAs PD based on a photonic crystal waveguide with a length of only 1.7 μm and a capacitance of less than 1 fF. Despite the small size of the device, a high responsivity of 1 A/W and a clear 40 Gbit/s eye diagram are observed, overcoming the conventional trade-off between size and responsivity. A resistor-loaded PD was actually fabricated for light-to-voltage conversion, and a kilo-volt/watt efficiency with a gigahertz bandwidth even without amplifiers was measured with an electro-optic probe. Combined experimental and theoretical results reveal that a bandwidth in excess of 10 GHz can be expected, leading to an ultralow energy consumption of less than 1 fJ/bit for the photoreceiver. Amplifier-less PDs with attractive performance levels are therefore feasible and a step toward a densely integrated photonic network/processor on a chip

Compact 1D-silicon photonic crystal electro-optic modulator operating with ultra-low switching voltage and energy

We demonstrate a small foot print (600 nm wide) 1D silicon photonic crystal electro-optic modulator operating with only a 50 mV swing voltage and 0.1 fJ/bit switching energy at GHz speeds, which are the lowest values ever reported for a silicon electro-optic modulator. A 3 dB extinction ratio is demonstrated with an ultra-low 50 mV swing voltage with a total device energy consumption of 42.8 fJ/bit, which is dominated by the state holding energy. The total energy consumption is reduced to 14.65 fJ/bit for a 300 mV swing voltage while still keeping the switching energy at less than 2 fJ/bit. Under optimum voltage conditions, the device operates with a maximum speed of 3 Gbps with 8 dB extinction ratio, which rises to 11 dB for a 1 Gbps modulation speed

Compact 1D-silicon photonic crystal electro-optic modulator operating with ultra-low switching voltage and energy

We demonstrate a small foot print (600 nm wide) 1D silicon photonic crystal electro-optic modulator operating with only a 50 mV swing voltage and 0.1 fJ/bit switching energy at GHz speeds, which are the lowest values ever reported for a silicon electro-optic modulator. A 3 dB extinction ratio is demonstrated with an ultra-low 50 mV swing voltage with a total device energy consumption of 42.8 fJ/bit, which is dominated by the state holding energy. The total energy consumption is reduced to 14.65 fJ/bit for a 300 mV swing voltage while still keeping the switching energy at less than 2 fJ/bit. Under optimum voltage conditions, the device operates with a maximum speed of 3 Gbps with 8 dB extinction ratio, which rises to 11 dB for a 1 Gbps modulation speed