Characterizing Broadband Seismic Noise in Central London

Recordings made at five broadband seismometers, deployed in central London during the summer of 2015, reveal the wideband nature (periods, T, of between 0.01 and 100 s) of anthropogenic noise in a busy urban environment. Temporal variations of power spectral density measurements suggest transportation sources generate the majority of the noise wavefield across the entire wideband, except at the secondary microseismic peak (220 s) which are recorded across the city. We record a unique set of signals 30m above a subway (London Underground) tunnel interpreted as a short-period dynamic component, a quasi-static response to the train moving underneath the instrument, and a very long period (T>30 s) response to air movement around the tunnel network. A low-velocity clay and sand overburden tens of metres thick is shown to amplify the horizontal component wavefield at T ∼1 s, consistent with properties of the London subsurface derived from engineering investigations. We provide tabulated median power spectral density values for all stations, to facilitate comparison with any future urban seismic deployments

Sub-slab mantle anisotropy beneath south-central Chile

Knowledge of mantle flow in convergent margins is crucial to unravelling both the contemporary geodynamics and the past evolution of subduction zones. By analysing shear-wave splitting in both teleseismic and local arrivals, we can determine the relative contribution from different parts of the subduction zone to the total observed SKS splitting, providing us with a depth constraint on anisotropy. We use this methodology to determine the location, orientation and strength of seismic anisotropy in the south-central Chile subduction zone. Data come from the TIPTEQ network, deployed on the forearc during 2004–2005. We obtain 110 teleseismic SKS and 116 local good-quality shear-wave splitting measurements. SKS average delay times are 1.3 s and local S delay times are only 0.2 s. Weak shear-wave splitting from local phases is consistent with a shape preferred orientation (SPO) source in the upper crust. We infer that the bulk of shear-wave splitting is sourced either within or below the subducting Nazca slab. SKS splitting measurements exhibit an average north-easterly fast direction, with a strong degree of variation. Further investigation suggests a relationship between the measurement's fast direction and the incoming ray's back-azimuth. Finite-element geodynamic modelling is used to investigate the strain rate field and predicted LPO characteristics in the subduction zone. These models highlight a thick region of high strain rate and strong S-wave anisotropy, with plunging olivine a-axes, in the sub-slab asthenosphere. We forward model the sub-slab sourced splitting with a strongly anisotropic layer of thick asthenosphere, comprising an olivine a-axis oriented parallel to the direction of subduction. The subducting lithosphere is not thick enough to cause 1.2 s of splitting, therefore our results and subsequent models show that the Nazca slab is entraining the underlying asthenosphere; its flow causes it to be strongly anisotropic. Our observation has important implications for the controlling factors on sub-slab mantle flow and the movement of asthenospheric material within the Earth

Characterizing broadband seismic noise in Central London

Recordings made at five broadband seismometers, deployed in central London during the summer of 2015, reveal the wideband nature (periods T of between 0.01 and 100 s) of anthropogenic noise in a busy urban environment. Temporal variations of power spectral density (PSD) measurements suggest that transportation sources generate the majority of the noise wavefield across the entire wideband, except at the secondary microseismic peak (220  s), which are recorded across the city. We record a unique set of signals 30 m above a subway (London Underground) tunnel interpreted as a short‐period dynamic component, a quasi‐static response to the train moving underneath the instrument and a very long period (T>30  s) response to air movement around the tunnel network. A low‐velocity clay and sand overburden tens of meters thick is shown to amplify the horizontal‐component wavefield at T∼1  s, consistent with properties of the London subsurface derived from engineering investigations. We provide tabulated median PSD values for all stations to facilitate comparison with any future urban seismic deployments

Seismic anisotropy in the Sumatra subduction zone

An important tool for understanding deformation occurring within a subduction zone is the measurement of seismic anisotropy through observations of shear wave splitting (SWS). In Sumatra, two temporary seismic networks were deployed between December 2007 and February 2009, covering the fore arc between the fore-arc islands to the back arc. We use SKS and local SWS measurements to determine the type, amount, and location of anisotropy. Local SWS measurements from the fore-arc islands exhibit trench-parallel fast directions which can be attributed to shape preferred orientation of cracks/fractures in the overriding sediments. In the Sumatran Fault region, the predominant fast direction is fault/trench parallel, while in the back-arc region it is trench perpendicular. The trench-perpendicular measurements exhibit a positive correlation between delay time and raypath length in the mantle wedge, while the fault-parallel measurements are similar to the fault-parallel fast directions observed for two crustal events at the Sumatran Fault. This suggests that there are two layers of anisotropy: one due to entrained flow within the mantle wedge and a second layer within the overriding crust due to the shear strain caused by the Sumatran Fault. SKS splitting results show a NNW-SSE fast direction with delay times of 0.8–3.0 s. The fast directions are approximately parallel to the absolute plate motion of the subducting Indo-Australian Plate. The small delay times exhibited by the local SWS (0.05–0.45 s), in combination with the large SKS delay times, suggest that the anisotropy generating the teleseismic SWS is dominated by entrained flow in the asthenosphere below the slab

Damage and seismic velocity structure of pulverized rocks near the San Andreas Fault

A combination of seismic refraction tomography, laboratory ultrasonic velocity measurements, and microstructural observations was used to study the shallow velocity structure of a strand of the San Andreas fault (SAF) just south of Littlerock, California. The examined site has a strongly asymmetric damage structure with respect to the SAF core. The conglomerates to the southwest show little to no damage, whereas a ~100 m wide damage zone exists to the northeast with a ~50 m wide zone of pulverized granite adjacent to the fault core. Seismic P‐wave velocities of the damaged and pulverized granite were investigated over a range of scales. In situ seismic velocity imaging was performed on three overlapping profiles normal to the SAF with lengths of 350 m, 50 m, and 25 m. In the laboratory, ultrasonic velocities were measured on centimeter‐ to decimeter‐sized samples taken along the in situ profiles. The samples were also investigated microstructurally. Micro‐scale fracture damage intensifies with increasing proximity to the fault core, allowing a subdivision of the damage zone into several sections. Laboratory‐derived velocities in each section display varying degrees of anisotropy, and combined with microfracture analysis suggest an evolving damage fabric. Pulverized rocks close to the fault exhibit a preferred fault‐parallel orientation of microfractures, resulting in the lowest P‐wave velocity orientated in fault‐perpendicular direction. Closest to the fault, pulverized rocks exhibit a gouge‐like fabric that is transitional to the fault core. Comparison of absolute velocities shows a scaling effect from field to laboratory for the intact rocks. A similar scaling effect is absent for the pulverized rocks, suggesting that they are dominated by micro‐scale damage. Fault‐parallel damage fabrics are consistent with existing models for pulverized‐rock generation that predict strong dynamic reductions in fault‐normal stress. Our observations provide important constraints for theoretical models and imaging fault damage properties at depth using remote methods

An initial assessment of the environmental impact of grocery products

This report presents a series of analyses with the common purpose of establishing which grocery products are likely to contribute most to the environmental impacts (carbon footprint or embodied carbon, embodied energy, water, materials use and waste) associated with UK household consumption. Understanding and prioritising these has enabled reduction actions, interventions and further research to be directed more effectively at those products with the greatest potential to influence overall consumption impacts.The report includes a systematic review of 1,900 grocery carbon footprint data points for 191 products; believed to be the largest assessment of its kind at the time of publication

Mantle flow in regions of complex tectonics: insights from Indonesia

Indonesia is arguably one of the tectonically most complex regions on Earth today due to its location at the junction of several major tectonic plates and its long history of collision and accretion. It is thus an ideal location to study the interaction between subducting plates and mantle convection. Seismic anisotropy can serve as a diagnostic tool for identifying various subsurface deformational processes, such as mantle flow, for example. Here, we present novel shear wave splitting results across the Indonesian region. Using three different shear phases (local S, SKS, and downgoing S) to improve spatial resolution of anisotropic fabrics allows us to distinguish several deformational features. For example, the block rotation history of Borneo is reflected in coast-parallel fast directions, which we attribute to fossil anisotropy. Furthermore, we are able to unravel the mantle flow pattern in the Sulawesi and Banda region: We detect toroidal flow around the Celebes Sea slab, oblique corner flow in the Banda wedge, and sub-slab mantle flow around the arcuate Banda slab. We present evidence for deep, sub-520 km anisotropy at the Java subduction zone. In the Sumatran backarc, we measure trench-perpendicular fast orientations, which we assume to be due to mantle flow beneath the overriding Eurasian plate. These observations will allow to test ideas of, for example, slab–mantle coupling in subduction regions

Subduction body force stresses, deformation and mantle seismic anisotropy at the 410 and 660km phase transitions

EThOS - Electronic Theses Online ServiceGBUnited Kingdo