Penetration of Wood Preservatives into Thermally Modified Birch and Pine Wood

The objective of the present study was to investigate the interaction between Cu-containing preservatives and birch (Betula spp.) and pine (Pinus sylvestris L.) wood, modified at a relatively mild temperatures (150 – 180ºC). The disposition of wood to absorb water was evaluated by capillary absorption (CA) tests through the specimens’ tangential and radial surface. Changes in wood drying characteristics due to thermal modification (TM) were evaluated by monitoring wood moisture dynamics after impregnation. In order to assess the capacity of wood to absorb preservatives, a vacuum/pressure process was used to impregnate small specimens for which uniform saturation into the entire volume can easily be reached. Quantitative determination of copper Cu content in the specimens was performed by using atomic absorption spectroscopy (AAS). The fixation of the absorbed Cu was evaluated by subjecting the specimens to leaching procedures according to EN 84 and assessing the ratio of retained Cu in the specimens. The CA test showed deceleration of capillary absorption in TM birch wood through both surfaces, with similar absorption rates regardless of treatment temperatures. A significant increase in the absorption rate through the tangential surface was recorded for TM pine wood and the increase was greater for specimens treated at higher temperatures. The results of moisture content monitoring showed a similar reduction in the drying rate due to thermal modification regardless of species. Comparing wood of one species with similar densities, less preservative was absorbed by TM wood. However, the results of AAS showed that, in comparison with unmodified wood, 10% (birch) and 25% (pine) more Cu per one gram of wood was introduced during impregnation. Nevertheless, TM also resulted in higher Cu leaching rates for both species

Spectral Sensitivity of Thermally Modified and Unmodified Wood

The chemical structure of wood changes significantly during thermal modification, significantly influencing the behaviour of wood during weathering. In this study, the effect of different wavelength ranges on thermally modified and unmodified aspen (Populus tremula L.) wood during solar irradiation was investigated. Irradiation was performed by exposing wood to natural solar irradiation under filters transmitting different wavelength ranges. For both woods, the magnitude of characteristic change (discolouration, changes in reflectance, and chemical composition) clearly depended on the solar wavelength bands, but the trends of the changes differed. For unmodified wood, the magnitude of the characteristic changes increased as the portion of short-wavelength radiation in the light increased. However, UV radiation was not found to be the dominant factor influencing changes in thermally modified wood during solar irradiation. The colour and chemical structure of thermally modified wood changed substantially for all studied irradiation conditions