Damaging Behaviour and Associated Lesions in Relation to Types of Enrichment for Finisher Pigs on Commercial Farms

peer-reviewedEU legislation states that all pigs must have access to material that allows them to perform investigation and manipulation activities, thereby reducing the risk of pigs performing damaging behaviours (e.g., tail, ear and flank biting). We aimed to determine associations between damaging behaviours performed by finisher pigs, the related lesions and the use of different types of enrichment. Six randomly selected pens of finisher pigs were observed for 10 min each on 31 commercial pig farms in Ireland. All pigs were counted and the number of pigs affected by tail, ear and flank lesions was recorded. During the last 5 min, all occurrences of damaging behaviour (tail-, ear- and flank-directed behaviour) were recorded. The type (chain, plastic or wood) and number of accessible enrichment objects/pen was recorded. Chains were the most common (41.4% of farms), followed by plastic (37.9%) and wood (20.7%). Damaging behaviour was more frequent on farms that provided chains compared to plastic or wood. Farms with chains were associated with a higher frequency of flank-directed behaviour and tended to be associated with a higher frequency of tail-directed behaviour compared to farms that provided plastic devices. The prevalence of lesions tended to be higher on farms where chains were provided compared to wooden enrichment devices, mostly driven by a difference in the prevalence of mild tail lesions. Results support expert opinions that despite being commonly used, chains did not fulfill a role in reducing damaging behaviours and associated lesions in finisher pigs compared to other forms of enrichment

Multi-Stakeholder Focus Groups on Potential for Meat Inspection Data to Inform Management of Pig Health and Welfare on Farm

peer-reviewedMeat inspection (MI) findings can act as a valuable source of information on pig health and welfare. The PIG WELFare INDicators (PIGWELFIND) project (Research Stimulus Fund 11/S/107) was developed to progress the development of ante and post mortem MI as a pig health and welfare diagnostic tool in Ireland. Three multi-stakeholder focus groups were organized to explore areas of conflict and agreement between stakeholders’ vision for including pig health and welfare indicators in MI and on how to achieve this vision. Each focus group consisted of eight stakeholders: pig producers, Teagasc pig advisors, pig processors, veterinarians involved in MI, private veterinary practitioners, and personnel with backgrounds in general animal health and welfare and food safety policy. In general, stakeholders expressed positive attitudes towards the use of MI data to inform pig health and welfare when standardization of recording and feedback is improved, and the MI system provides real-time benchmarking possibilities. Most emphasis was placed on health indicators as a first priority, while it was felt that welfare-related indicators could be included after practical barriers had been addressed (i.e., line speed/feasibility, standardization and training of meat inspectors, data ownership). Recommendations are made to further progress the development of MI as a pig health and welfare diagnostic tool and address some of these barriers

Prevalence of welfare outcomes in the weaner and finisher stages of the production cycle on 31 Irish pig farms

peer-reviewedBackground Knowledge on the most prevalent welfare problems for pigs in different production stages is required to improve herd management plans. Thirty-one farrow-to-finish pig farms were visited between July and November 2015 to assess the welfare of pigs using the multicriteria approach of the Welfare Quality® protocol. On each farm, 6 pens were selected using proportionate stratified sampling in the first weaner (S1, 4 to 8 wks), second weaner (S2, 8 to 13 wks) and finisher stage (S3, 13 to 23 wks), excluding hospital pens. Each pen was observed for 10 min and the number of pigs affected by different welfare outcomes was recorded. The percentage of pigs affected was calculated and ranked to identify the most prevalent outcomes within each production stage. Differences between production stages were analysed using generalised linear mixed models for binomial data with pen within stage and farm as a random effect. Results Tail and ear lesions showed the highest prevalence; however, large variation was observed between farms. In S1 the most prevalent welfare outcomes (presented as median prevalence) were poor body condition (4.4%), lethargic pigs (1.5%), scouring (20.3% of pens) and huddling (3.7%). In S2 and S3 outcomes related to injurious behaviour (tail lesions: 5.9% [S2] and 10.5% [S3], ear lesions: 9.1% [S2] and 3.3% [S3], and flank lesions: 0.4% [S2] and 1.3% [S3]), lameness (0.8% [S2] and 1.1% [S3]), bursitis (3.9% [S2] and 7.5% [S3]) and hernias (1.6% [S2] and 1.8% [S3]) were more prevalent. Conclusions A large variation was observed for the recorded welfare outcomes corresponding to the different challenges pigs experience during the different stages of production on commercial pig farms. The prevalence of pigs affected by lesions caused by injurious behavior is a cause for concern and requires a collaborative approach to identify appropriate intervention strategies. This information could be used to further investigate appropriate benchmark values for different welfare outcomes that would assist the pig industry to develop appropriate health and welfare management plans to minimise welfare problems. At herd level such plans should include information on aspects of intervention, treatment, and the management of hospital pens as well as euthanasia.This study was part of the PIGWELFIND project funded by the Research Stimulus Fund (11/S/107) of the Irish Department of Agriculture, Food and Marine under the National Development Plan (2007–2013). We acknowledge the Walsh Fellowship Scheme for providing funding for Nienke van Staaveren. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

The usual suspects: Co-occurrence of integument injuries in turkey flocks.

The present study investigated the prevalence and co-occurrence of integument injuries in Canadian turkeys. Participating farmers scored 30 birds in their flock for integument injuries to the head/neck (HN), back/tail (BT), and footpad (FP) using a simplified scoring system (0: no sign of injury, 1: mild injury, 2: severe injury). Information from 62 flocks was used to calculate the prevalence of any (score ≥1) and severe (score 2) injuries on a flock- and individual-level. Chi-square analyses were performed to determine the likelihood of integument injury co-occurrence. The prevalence of each type of injury varied between flocks. While the majority of flocks reported injuries, the within-flock prevalence was relatively low and largely comprised of mild cases (score 1). Given their higher prevalence, the data indicate that FP injuries are overall more widespread and more severe among Canadian turkey flocks than HN and BT injuries. Co-occurrence of different integument injuries was observed in 7% of birds and 58.1% of flocks reported at least one bird with co-occurring injury types. Despite the low prevalence of multiple injury types, birds with one type of injury were more likely to present with other injury types. Indeed, birds with HN injuries were 4 times more likely to have BT injuries, and birds with FP injuries were 1.5 times more likely to have BT injuries compared to birds that do not have these respective injuries. The data increase our understanding of the co-occurrence of these common integument injuries which can help inform a holistic management approach to rear turkeys with healthy skin and feather cover

A Description of Laying Hen Husbandry and Management Practices in Canada

Canadian laying hen farms are transitioning from conventional cage housing to furnished cage and non-cage housing systems to improve laying hen welfare. However, little is known about the current housing and management systems in Canada. This study addresses this knowledge gap by describing different housing and management practices used on farms where laying hens were housed in furnished cages or non-cage housing systems. A questionnaire covering farm and housing conditions, litter management, nutrition and feeding, environmental control, flock characteristics, rearing and placement, health, egg production and performance were distributed through provincial egg boards to 122 producers across Canada. Data were collected from 65 laying hen flocks (52.5% response rate) in 26 furnished cage, 17 single-tier and 22 multi-tier systems. Flocks were on average 45.1 ± 14.59 weeks old (range: 19–69 weeks). Frequencies of different management practices were calculated according to housing system. Most flocks were reared in the same housing system as they were housed in during lay, with the exception of furnished cage layers which were reared in conventional cage systems. Results indicated that a large proportion of non-cage systems were either fully slatted or had manure as a litter substrate, which could have implications for consumer perspectives on these systems. Further research is needed to develop clear recommendations on proper litter management for farmers. In general, flock health was managed through daily inspections and vaccination schemes, whereas veterinarian involvement on-farm was less common. Vaccination, hygiene, and effective biosecurity should be maintained to ensure good health in laying hens in furnished cage and non-cage systems during the transition to these systems

Are Turkeys (Meleagris gallopavo) Motivated to Avoid Excreta-Soiled Substrate?

The soiling of bedding on modern turkey farms combined with turkeys' reduced ability and opportunity to perch and roost at elevation, forces them to spend most, if not all, of their time in contact with their excreta. To determine turkeys' perspective on these conditions and the value they place on unsoiled bedding vs. soiled litter (collectively, substrates), we used twenty-four eleven-week-old turkey hens divided into six two-compartment pens. In the "home" compartment (H), we placed soiled wood shavings, while the "treatment" compartment (T) contained no substrate (NS), fresh pine and spruce wood shavings (FP), soiled pine and spruce wood shavings (SP), ammonia reductant-treated soiled pine and spruce wood shavings (TSP), or a feed treatment. One-way push-doors separated the two compartments. The door leading to T weighed an additional 0%, 20% or 40% of the turkeys' body weight while the door to H remained unweighted. All birds were exposed to each resource and door weight combination in a systematic order. We measured the turkeys' motivation based on the number of birds that pushed the maximum weight to access each resource, the amount of time spent in T, and the number of visits to T. Our findings show that turkeys worked harder to access feed compared to all the floor substrate treatments. Additionally, they were equally motivated to access all the substrate treatments

Influence of Post Mortem Muscle Activity on Turkey Meat Quality.

Wing flapping and body movement can occur during the slaughter of poultry. Wing movement and flapping are driven primarily by the breast muscles (Pectoralis major and minor), and this muscle activity may have implications for meat quality. The objective of this study was to evaluate turkey post mortem activity during slaughter at a commercial poultry processing plant. Post mortem activity (during bleeding) was scored on 5,441 male turkeys, from six different genetic lines, using a 1-4 scale from none to severe wing flapping. Meat quality was measured on these birds in terms of pH (initial, ultimate, delta or change), color (L*, a*, b*), and physiochemical traits (drip loss, cooking loss, shear force). Linear mixed models were used to analyze the effect of activity (score 1-4), genetic line (A-F), and season (summer vs. autumn) on the nine meat quality traits. Post mortem activity influenced a*, drip loss, and shear force although the magnitude of the effects was small. There was an effect (P < 0.05) of genetic line on all the meat quality traits except for L*, cooking loss, and shear force. In general, larger, faster-growing lines had higher pH, but the relationship between the lines for the other traits is not as clear. Season affected all the meat quality traits, except for pHdelta, with meat having a higher pH, L*, b*, drip loss, cooking loss, and shear force in the summer. This study provides an exploratory assessment of post mortem activity in turkeys and identifies meat quality traits which are most affected while also accounting for the effects of genetic line and season. Although identified effect sizes are small, the cumulative effect on turkey meat quality may be more substantial

Effects of Clipping of Flight Feathers on Resource Use in Gallus gallus domesticus

Ground-dwelling species of birds, such as domestic chickens (Gallus gallus domesticus), experience difficulties sustaining flight due to high wing loading. This limited flight ability may be exacerbated by loss of flight feathers that is prevalent among egg-laying chickens. Despite this, chickens housed in aviary style systems need to use flight to access essential resources stacked in vertical tiers. To understand the impact of flight feather loss on chickens’ ability to access elevated resources, we clipped primary and secondary flight feathers for two hen strains (brown-feathered and white-feathered, n = 120), and recorded the time hens spent at elevated resources (feeders, nest-boxes). Results showed that flight feather clipping significantly reduced the percentage of time that hens spent at elevated resources compared to ground resources. When clipping both primary and secondary flight feathers, all hens exhibited greater than or equal to 38% reduction in time spent at elevated resources. When clipping only primary flight feathers, brown-feathered hens saw a greater than 50% reduction in time spent at elevated nest-boxes. Additionally, brown-feathered hens scarcely used the elevated feeder regardless of treatment. Clipping of flight feathers altered the amount of time hens spent at elevated resources, highlighting that distribution and accessibility of resources is an important consideration in commercial housing

Biomechanics of landing in injured and uninjured chickens and the role of meloxicam

Birds use their legs and wings when transitioning from aerial to ground locomotion during landing. To improve our understanding of the effects of footpad dermatitis (FPD) and keel bone fracture (KBF) upon landing biomechanics in laying hens, we measured ground-reaction forces generated by hens (n = 37) as they landed on force plates (Bertec Corporation, Columbus, OH) from a 30 cm drop or 170 cm jump in a single-blinded placebo-controlled trial using a cross-over design where birds received an anti-inflammatory (meloxicam, 5 mg/kg body mass) or placebo treatment beforehand. We used generalized linear mixed models to test for effects of health status, treatment and their interaction on landing velocity (m/s), maximum resultant force (N), and impulse (force integrated with respect to time [N s]). Birds with FPD and KBF tended to show divergent alterations to their landing biomechanics when landing from a 30 cm drop, with a higher landing velocity and maximum force in KBF compared to FPD birds, potentially indicative of efforts to either reduce the use of their wings or impacts on inflamed footpads. In contrast, at 170 cm jumps fewer differences between birds of different health statuses were observed likely due to laying hens being poor flyers already at their maximum power output. Our results indicate that orthopedic injuries, apart from being welfare issues on their own, may have subtle influences on bird mobility through altered landing biomechanics that should be considered

Meta-analysis to predict the effects of temperature stress on meat quality of poultry.

Temperature stress (TS) is a significant issue in poultry production, which has implications for animal health and welfare, productivity, and industry profitability. Temperature stress, including both hot (heat stress) and cold conditions (cold stress), is associated with increased incidence of meat quality defects such as pale, soft, and exudative (PSE) and dark, firm, and dry (DFD) meat costing poultry industries millions of dollars annually. A meta-analysis was conducted to determine the effect of ambient TS on meat quality parameters of poultry. Forty-eight publications which met specific criteria for inclusion were identified through a systematic literature review. Temperature stress was defined by extracting 2 descriptors for each treatment mean from the chosen studies: (1) temperature imposed for the experimental treatments (°C) and duration of temperature exposure. Treatment duration was categorized for analysis into acute (≤24 h) or chronic (>24 h) treatments. Meat quality parameters considered were color (L*-a*-b* scheme), pH (initial and ultimate), drip loss, cooking loss, and shear force. Linear mixed model analysis, including study as a random effect, was used to determine the effect of treatment temperature and duration on meat quality. Model evaluation was conducted by performing a k-fold cross-validation to estimate test error, and via assessment of the root mean square prediction error (RMSPE), and concordance correlation coefficient (CCC). Across both acute and chronic durations, treatment temperature was found to have a significant effect on all studied meat quality parameters. As treatment temperature increased, meat demonstrated characteristics of PSE meat and, as temperature decreased, meat demonstrated characteristics of DFD meat. The interaction between treatment temperature and duration was significant for most traits, however, the relative impact of treatment duration on the studied traits was inconsistent. Acute TS had a larger effect than chronic TS on ultimate pH, and chronic stress had a more considerable impact on color traits (L* and a*). This meta-analysis quantifies the effect of ambient TS on poultry meat quality. However, quantitative effects were generally small, and therefore may or may not be of practical significance from a processing perspective