Cr(VI) Removal from Aqueous Solution Using a Magnetite Snail Shell

© 2020, Springer Nature Switzerland AG. In this study, magnetic snail shell (MSS) prepared by impregnating of iron oxide onto snail shell (SS) powder was used for removing Cr(VI) from aqueous solution. Among six different mass ratios of Fe/SS powder studied, the MSS25 produced at a ratio of 25% achieved the highest Cr(VI) adsorption capacity. Batch adsorption experiments were conducted to investigate the adsorption isotherm, kinetics, and mechanism of Cr(VI) onto MSS25. The results illustrated that adsorption of Cr(VI) onto MSS25 reached equilibrium after 150 min at pH 3. The adsorption kinetics could be well described by the pseudo-second order model (R2 = 0.986). The Langmuir model (R2 = 0.971) was the best-fitting model that described the adsorption isotherm of Cr(VI) onto MSS25. The maximum adsorption capacity was 46.08 mg Cr(VI) per gram of MSS25. Ion exchange, electrostatic attraction, and adsorption-coupled reduction were determined as the main adsorption mechanisms of Cr(VI) onto MSS25. The high percentages of CaCO3 and Fe3O4 found in the MSS25 structure made a significant contribution to the Cr(VI) adsorption process

Phosphate Adsorption by Silver Nanoparticles-Loaded Activated Carbon derived from Tea Residue.

This study presents the removal of phosphate from aqueous solution using a new silver nanoparticles-loaded tea activated carbon (AgNPs-TAC) material. In order to reduce costs, the tea activated carbon was produced from tea residue. Batch adsorption experiments were conducted to evaluate the effects of impregnation ratio of AgNPs and TAC, pH solution, contact time, initial phosphate concentration and dose of AgNPs-AC on removing phosphate from aqueous solution. Results show that the best conditions for phosphate adsorption occurred at the impregnation ratio AgNPs/TAC of 3% w/w, pH 3, and contact time lasting 150 min. The maximum adsorption capacity of phosphate on AgNPs-TAC determined by the Langmuir model was 13.62 mg/g at an initial phosphate concentration of 30 mg/L. The adsorption isotherm of phosphate on AgNPs-TAC fits well with both the Langmuir and Sips models. The adsorption kinetics data were also described well by the pseudo-first-order and pseudo-second-order models with high correlation coefficients of 0.978 and 0.966, respectively. The adsorption process was controlled by chemisorption through complexes and ligand exchange mechanisms. This study suggests that AgNPs-TAC is a promising, low cost adsorbent for phosphate removal from aqueous solution

Applying Activated Carbon Derived from Coconut Shell Loaded by Silver Nanoparticles to Remove Methylene Blue in Aqueous Solution

© 2018, Springer Nature Switzerland AG. This study developed a new adsorbent, specifically activated carbon-loaded silver nanoparticles (AgNPs-AC) by coating the silver nanoparticles (AgNPs) onto activated carbon (AC). The obtained AgNPs-AC were characterized by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), Fourier transform infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET). The ability of AgNPs-AC to remove methylene blue (MB) was evaluated using different experimental factors, these being pH solution, contact time, adsorbent dose, and initial MB concentration. Results indicated that the highest adsorption capacity of MB onto AgNPs-AC was obtained when the AC was loaded onto AgNPs at the impregnation ratio of 0.5% w/w for AC and AgNPs. The best conditions in which AgNPs-AC could remove MB were as follows: pH 10, contact time lasting 120 min, and adsorbent dose being 250 mg/25 mL solution. In this scenario, the maximum adsorption capacity of MB onto AgNPs-AC was 172.22 mg/g. The adsorption isothermal equilibrium was well described by the Langmuir, Freundlich and Sips models. The Sips equations had the highest correlation coefficient value (R2 = 0.935). The pseudo-first-order and pseudo-second-order kinetic models agree well with the dynamic behavior of the adsorption of dye MB on AgNPs-AC