1,797 research outputs found
A constitutive model for cemented clays capturing cementation degradation
Laboratory experiments show that the effect of cementation on clays gradually diminishes as the confining pressure increases (particularly at high confining pressures) due to the degradation of cementation bonds. The main aim of this paper is to propose a constitutive model for cemented clays, referred to as the Cemented Cam Clay model (CCC), to simulate the cementation degradation during loading. The failure envelope of the proposed model is formulated to describe the behaviour of the cemented clay at a low pressure range similar to over-consolidated soils, while it merges with the Critical State Line of reconstituted sample gradually as the confining pressure continues to increase. In order to examine the stress-strain behaviour of cemented clays, an energy dissipation equation is developed inspired by the Modified Cam Clay model. The characteristics of the proposed model, including a non-associated plastic potential function and elasto-plastic stress-strain relationship, are presented in light of the Critical State concept. Validity of the proposed constitutive model derived from the modified energy equation is evaluated against triaxial test results for cemented clays available in literature. © 2014 Published by Elsevier Ltd. All rights reserved
Energy-Efficient Signalling in QoS Constrained Heterogeneous Networks
© 2013 IEEE. This paper considers a heterogeneous network, which consists of one macro base station and numerous small cell base stations (SBSs) cooperatively serving multiple user terminals. The first objective is to design cooperative transmit beamformers at the base stations to maximize the network energy efficiency (EE) in terms of bits per joule subject to the users' quality of service (QoS) constraints, which poses a computationally difficult optimization problem. The commonly used Dinkelbach-type algorithms for optimizing a ratio of concave and convex functions are not applicable. This paper develops a path-following algorithm to address the computational solution to this problem, which invokes only a simple convex quadratic program of moderate dimension at each iteration and quickly converges at least to a locally optimal solution. Furthermore, the problem of joint beamformer design and SBS service assignment in the three-objective (EE, QoS, and service loading) optimization is also addressed. Numerical results demonstrate the performance advantage of the proposed solutions
Effects of operational disturbance and subsequent recovery process on microbial community during a pilot-scale anaerobic co-digestion
© 2019 This study investigated changes in microbial community structure and composition in response to operational disturbance and subsequent process recovery by inoculum addition. Amplicon sequencing of 16S rRNA and mcrA marker genes on the Illumina Miseq platform was used for microbial community analysis. The results show that imbalance among core microbial groups caused volatile fatty acid accumulation and subsequent deteriorated biogas production (decreased by 45% of daily volume) and methane content (57% of the total abundance) and reduction of acetogenic and methanogenic microbes (they accounted for <9% and <3% of the total abundance, respectively). Acetogens and methanogens were replenished by inoculum addition to recover digester performance. Although digester performances were similar in stable (prior to disturbance) and post recovery phases, the microbial community did not return to the original state, suggesting the existence of functional redundancy in the community
Synergistic effect of dual flocculation between inorganic salts and chitosan on harvesting microalgae Chlorella vulgaris
© 2020 Elsevier B.V. The flocculation efficiency of microalgae Chlorella vulgaris for subsequent harvesting was investigated using single flocculants of inorganic salts, synthetic polymer, chitosan and dual flocculants of inorganic salts and chitosan. Synthetic polymer (FlopamTM) could achieve over 90% optical density removal (OD680removal) at a low flocculant dose (20 to 40 mg polymer per litre of algal suspension) through the bridging mechanism and charge neutralisation. Inorganic salts (i.e. ferric chloride and aluminium sulphate) and chitosan individually resulted in low flocculation efficiency (80% flocculation efficiency, significantly higher than the sum of each individual flocculation. The improvement in flocculation efficiency was 57 and 24% respectively for ferric chloride/chitosan and aluminium sulphate/chitosan. Charge neutralisation of microalgal cells by ferric chloride or aluminium sulphate combined with bridging by chitosan produced the synergy
Application of rumen and anaerobic sludge microbes for bio harvesting from lignocellulosic biomass
© 2019 Elsevier Ltd This study investigated the production of biogas, volatile fatty acids (VFAs), and other soluble organic from lignocellulosic biomass by two microbial communities (i.e. rumen fluid and anaerobic sludge). Four types of abundant lignocellulosic biomass (i.e. wheat straw, oaten hay, lurence hay and corn silage)found in Australia were used. The results show that rumen microbes produced four-time higher VFAs level than that of anaerobic sludge reactors, indicating the possible application of rumen microorganism for VFAs generation from lignocellulosic biomass. VFA production in the rumen fluid reactors was probably due to the presence of specific hydrolytic and acidogenic bacteria (e.g. Fibrobacter and Prevotella). VFA production corroborated from the observation of pH drop in the rumen fluid reactors indicated hydrolytic and acidogenic inhibition, suggesting the continuous extraction of VFAs from the reactor. Anaerobic sludge reactors on the other hand, produced more biogas than that of rumen fluid reactors. This observation was consistent with the abundance of methanogens in anaerobic sludge inoculum (3.98% of total microbes)compared to rumen fluid (0.11%). VFA production from lignocellulosic biomass is the building block chemical for bioplastic, biohydrogen and biofuel. The results from this study provide important foundation for the development of engineered systems to generate VFAs from lignocellulosic biomass
Selection of microalgae strains for sustainable production of aviation biofuel.
This study develops and applies the PROMETHEE-GAIA method as a new tool to select microalgae strains for aviation fuel production. Assessment involves 19 criteria with equal weighting in three aspects, namely biomass production, lipid quality, and fatty acid methylester properties. Here, the method is demonstrated for evaluating 17 candidate microalgae strains. Chlorella sp. NT8a is assessed as the most suitable strain for aviation fuel production. The results also show that unmodified biofuel from the most suitable strain could not meet all jet fuel standards. In particular, microalgae-based fuel could not satisfy the required density, heating value and freezing points of the international jet fuel standards. These results highlight the need for a broad action plan including improvement in the processing or modification of biofuel produced from microalgae and revision of the current jet fuel standards to facilitate the introduction of microalgae-based biofuel for the aviation industry
Factors governing microalgae harvesting efficiency by flocculation using cationic polymers.
This study aims to elucidate the mechanisms governing the harvesting efficiency of Chlorella vulgaris by flocculation using a cationic polymer. Flocculation efficiency increased as microalgae culture matured (i.e. 35-45, 75, and > 97% efficiency at early, late exponential, and stationary phase, respectively. Unlike the negative impact of phosphate on flocculation in traditional wastewater treatment; here, phosphorous residue did not influence the flocculation efficiency of C. vulgaris. The observed dependency of flocculation efficiency on growth phase was driven by changes in microalgal cell properties. Microalgal extracellular polymeric substances (EPS) in both bound and free forms at stationary phase were two and three times higher than those at late and early exponential phase, respectively. Microalgae cells also became more negatively charged as they matured. Negatively charged and high EPS content together with the addition of high molecular weight and positively charged polymer could facilitate effective flocculation via charge neutralisation and bridging
Insight into greenhouse gases emissions from the two popular treatment technologies in municipal wastewater treatment processes
© 2019 Elsevier B.V. Due to the impact of methane, carbon dioxide and nitrous oxide on global warming, the quantity of these greenhouse gases (GHG) emissions from municipal wastewater treatment plants (WWTPs) has attracted more and more attention. Consequently, GHG emissions from the two popular treatment technologies: anaerobic/anoxic/oxic (AAO) process and sequencing batch reactor (SBR) should be properly identified and discussed toward the current situation in developing countries. Direct and indirect carbon dioxide (with and/or without including in Intergovernmental Panel on Climate Change (IPCC) report) are all discussed in this article. This literature study observed that a quantity of total carbon dioxide emissions from SBR (374 g/m3 of wastewater) was double that of AAO whilst 10% of these was direct carbon dioxide. Methane emitted from an SBR was 0.50 g/m3 wastewater while 0.18 g CH4/m3 wastewater was released from an AAO. The level of nitrous oxide from AAO and SBR accounted for 0.97 g/m3 wastewater and 4.20 g/m3 wastewater, respectively. Although these results were collected from different WWTPs and where influent was in various states, GHGs emitted from both biological units and other treatment units in various processes are significant. The results also revealed that aerated zone is the major contributing factor in a wastewater treatment plant to the large amount of GHG emissions
A Novel Approach in Crude Enzyme Laccase Production and Application in Emerging Contaminant Bioremediation
Laccase enzyme from white-rot fungi is a potential biocatalyst for the oxidation of emerging contaminants (ECs), such as pesticides, pharmaceuticals and steroid hormones. This study aims to develop a three-step platform to treat ECs: (i) enzyme production, (ii) enzyme concentration and (iii) enzyme application. In the first step, solid culture and liquid culture were compared. The solid culture produced significantly more laccase than the liquid culture (447 vs. 74 µM/min after eight days), demonstrating that white rot fungi thrived on a solid medium. In the second step, the enzyme was concentrated 6.6 times using an ultrafiltration (UF) process, resulting in laccase activity of 2980 µM/min. No enzymatic loss due to filtration and membrane adsorption was observed, suggesting the feasibility of the UF membrane for enzyme concentration. In the third step, concentrated crude enzyme was applied in an enzymatic membrane reactor (EMR) to remove a diverse set of ECs (31 compounds in six groups). The EMR effectively removed of steroid hormones, phytoestrogen, ultraviolet (UV) filters and industrial chemical (above 90%). However, it had low removal of pesticides and pharmaceuticals.</jats:p
Simultaneous nutrient recovery and algal biomass production from anaerobically digested sludge centrate using a membrane photobioreactor.
This study aims to evaluate the performance of C. vulgaris microalgae to simultaneously recover nutrients from sludge centrate and produce biomass in a membrane photobioreactor (MPR). Microalgae growth and nutrient removal were evaluated at two different nutrient loading rates (sludge centrate). The results show that C. vulgaris microalgae could thrive in sludge centrate. Nutrient loading has an indiscernible impact on biomass growth and a notable impact on nutrient removal efficiency. Nutrient removal increased as the nutrient loading rate decreased and hydraulic retention time increased. There was no membrane fouling observed in the MPR and the membrane water flux was fully restored by backwashing using only water. However, the membrane permeability varies with the hydraulic retention time (HRT) and biomass concentration in the reactor. Longer HRT offers higher permeability. Therefore, it is recommended to operate the MPR system in lower HRT to improve the membrane resistance and energy consumption
- …