Computational prediction of electrical and thermal properties of graphene and BaTiO3 reinforced epoxy nanocomposites

Graphene based materials e.g., graphene oxide (GO), reduced graphene oxide (RGO) and graphene nano platelets (GNP) as well as Barium titanate (BaTiO3) are emerging reinforcing agents which upon mixing with epoxy provides composite materials with superior mechanical, electrical and thermal properties as well as shielding against electromagnetic (EM) radiations. Inclusion of the aforementioned reinforcing agents has shown to improve the performance, however, the extent of improvement has remained uncertain. In this study, a computational modelling approach was adopted using COMSOL Multiphysics software in conjunction with Bayesian statistical analysis to investigate the effects of including various filler materials e.g. GO, RGO, GNP and BaTiO3 in influencing the direct current (DC) conductivity (σ), dielectric constant (ε) and thermal properties on the resulting epoxy polymer matrix composites. The simulation of epoxy composites were performed for different volume percentage of the filler materials by varying the geometry of the filler material. It was observed that the content of GO, RGO, GNPs and the thickness of graphene nanoplatelets can alter the DC conductivity, dielectric constant, and thermal properties of the epoxy matrix. The lower thickness of GNPs was found to offer the larger value of DC conductivity, thermal conductivity and thermal diffusivity than rest of the graphene nanocomposites, while, the RGO showed better dielectric constant value than neat epoxy, and GO, GNP nanocomposites. Similarly, BaTiO3 nanoparticles content and diameter were observed to alter the dielectric constant, DC conductivity and thermal properties of modified epoxy in several order magnitude than neat epoxy. In this way, the higher diameter particles of BaTiO3 showed better DC conductivity properties, dielectric constant value, thermal conductivity and thermal diffusivity. Moreover, this research provides guidance for further computational examination on the selection of GNP and BaTiO3 materials for the enhancement of the electrical and thermal properties of the epoxy matrix

Low electric field induction in BaTiO3-epoxy nanocomposites

Epoxy is widely used material, but epoxy has limitations in terms of brittleness in failure, and thus researchers explore toughening and strengthening options such as adding a second phase or using electromagnetic fields to tailor toughness and strength, on demand and nearly instantaneously. Such approach falls into the category of active toughening but has not been extensively investigated. In this research, Si-BaTiO3 nanoparticles were used to modify the electro-mechanical properties of a high-performance aerospace-grade epoxy so as to study its response to electric fields, specifically low field strengths. To promote uniform dispersion and distribution, the Si-BaTiO3 nanoparticles were functionalised with silane coupling agents and mixed in the epoxy Araldite LY1564 at different content loads (1, 5, 10 wt%), which was then associated with its curing agent Aradur 3487. Real-time measurements were conducted using Raman spectroscopy while applying electric fields to the nanocomposite specimens. The Raman data showed a consistent trend of increasing intensity and peak broadening under the increasing electric field strength and Si-BaTiO3 contents. This was attributed to the BaTiO3 particles’ dipolar displacement in the high-content nanocomposites (i.e., 5 wt% and 10 wt%). The study offers valuable insights on how electric field stimulation can actively enhance the mechanical properties in epoxy composites, specifically in relatively low fields and thin, high-aspect-ratio composite layers which would require in-situ mechanical testing equipped with electric field application, an ongoing investigation of the current research

Borophene: A 2D Wonder Shaping the Future of Nanotechnology and Materials Science

This comprehensive review explores the expanding potential of two-dimensional (2D) materials, with a specific emphasis on borophene, in the realm of energy harvesting and storage. The article initiates by elucidating the foundational aspects of 2D materials, encompassing diverse synthesis methods and intrinsic properties like high carrier mobility, tunable bandgap, and exceptional thermal conductivity. The focal point of the review revolves around the diverse applications of 2D materials, spanning photoelectric energy harvesting, thermoelectric energy conversion, and vibrational energy capture. Furthermore, the article delves into the pivotal roles played by 2D materials in advancing energy storage technologies, including batteries, supercapacitors, and fuel cells. To anticipate future advancements, the review identifies crucial research trajectories, including the development of novel 2D materials with enhanced properties, the innovation of cutting-edge device architectures, and the strategic integration of 2D materials with existing energy technologies. In conclusion, this review provides a comprehensive perspective on how 2D materials, particularly led by borophene, are poised to reshape the energy landscape. It caters to the interests of researchers, engineers, policymakers, and investors eager to contribute to and navigate the evolving course of energy innovation

Thermal spray coatings for electromagnetic wave absorption and interference shielding: a review and future challenges

This review paper aims to consolidate scattered literature on thermally sprayed coatings with non-ionising electromagnetic (EM) wave absorption and shielding over specific wavelengths potentially useful in diverse applications (e.g., microwave to millimeter wave, solar selective, photocatalytic, interference shielding, thermal barrier-heat/emissivity). Materials EM properties such as electric permittivity, magnetic permeability, electrical conductivity, and dielectric loss are critical due to which a material can respond to absorbed, reflected, transmitted, or may excite surface electromagnetic waves at frequencies typical of electromagnetic radiations. Thermal spraying is a standard industrial practice used for depositing coatings where the sprayed layer is formed by successive impact of fully or partially molten droplets/particles of a material (used in the form of powder or wire) exposed to high or moderate temperatures and velocities. However, as an emerging novel application of an existing thermal spray techniques, some special considerations are warranted for targeted development involving relevant characterisation. Key potential research areas of development relating to material selection and coating fabrication strategies and their impact on existing practices in the field are identified. The study shows a research gap in the feedstock materials design and doping (including hollow and yolk-shelled structure types) and their complex selection covered by thermally sprayed coatings that can be critical to advancing applications exploiting their electromagnetic propertie

Heterogeneous contributions of change in population distribution of body mass index to change in obesity and underweight

From 1985 to 2016, the prevalence of underweight decreased, and that of obesity and severe obesity increased, in most regions, with significant variation in the magnitude of these changes across regions. We investigated how much change in mean body mass index (BMI) explains changes in the prevalence of underweight, obesity, and severe obesity in different regions using data from 2896 population-based studies with 187 million participants. Changes in the prevalence of underweight and total obesity, and to a lesser extent severe obesity, are largely driven by shifts in the distribution of BMI, with smaller contributions from changes in the shape of the distribution. In East and Southeast Asia and sub-Saharan Africa, the underweight tail of the BMI distribution was left behind as the distribution shifted. There is a need for policies that address all forms of malnutrition by making healthy foods accessible and affordable, while restricting unhealthy foods through fiscal and regulatory restrictions. © Copyright