Study of Optimal Design of Low Pass Block Digital Filter

In this paper design of low pass optimal block digital filter is compared with traditional low pass overlap-save block digital filter. Simulation results show that global error obtained by optimal method is lower than that obtained by traditional overlap-save method

Effects of arthroscopic vs. mini-open rotator cuff repair on function, pain & range of motion. A systematic review and meta-analysis

Objective To assess the effectiveness of arthroscopic versus mini-open rotator cuff repair on function, pain and range of motion at 3-, 6- and 12-month follow ups. Design Systematic review and meta-analysis of randomized controlled trials. Setting Clinical setting. Participants Patients 18 years and older with a rotator cuff tear. Intervention/Comparison Arthroscopic/mini-open rotator cuff repair surgery followed by post operative rehabilitation. Main outcome measures Function and pain. Results Six RCTs (n = 670) were included. The pooled results, demonstrated no significant difference between arthroscopic and mini open approach to rotator cuff repair on function (very low quality, 4 RCTs, 495 patients, SMD 0.00, 3-month; very low quality, 4 RCTs, 495 patients, SMD -0.01, 6-month; very low quality, 3 RCTs, 462 patients, SMD -0.09, 12-months). For pain, the pooled results, were not statistically different between groups (very low quality, 3 RCTs, 254 patients, MD -0.21, 3-month; very low quality, 3 RCTs, 254 patients, MD -0.03, 6-month; very low quality, 2 RCTs, 194 patients, MD -0.35, 12-months). Conclusion The effects of arthroscopic compared to mini-open rotator cuff repair, on function, pain and range of motion are too small to be clinically important at 3-, 6- and 12-month follow ups

Restoring the Esthetics in Hemiparalytic Patient with Detachable Prosthesis

Emphasis on facial esthetics has become an integral part of dental treatment. Restoring and improving facial appearance of a complete edentulous patient with hollow cheeks is achallenge to the prosthodontist. Thus, to improve patient’s lower lip contour that was paralyzed and to improve patient’s oral competency, a detachable prosthesis was fabricated. This clinical report describes the procedure for making a lip plumper prosthesis to improve patient esthetics, oral function

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Validity and responsiveness of the short version of the western Ontario rotator cuff index (Short-WORC) in patients with rotator cuff repair

©2018 Journal of Orthopaedic & Sports Physical Therapy® U STUDY DESIGN: Clinical measurement. U BACKGROUND: Recently, the Western Ontario Rotator Cuff Index (WORC) was shortened, but few studies have reported its measurement properties. U OBJECTIVE: To compare the validity and responsiveness of the short version of the Western Ontario Rotator Cuff Index (Short-WORC) and the WORC (disease-specific measures) with those of the Shoulder Pain and Disability Index (SPADI) and the simple shoulder test (SST) (joint-specific measures); the Disabilities of the Arm, Shoulder and Hand (DASH) (a region-specific measure); and the Medical Outcomes Study 12-Item Short-Form Health Survey version 2 (SF-12v2) (a general health status measure) in patients undergoing rotator cuff repair (RCR). U METHODS: A cohort of patients (n = 223) completed the WORC, SPADI, SST, DASH, and SF-12v2 preoperatively and at 3 and 6 months after RCR. Short-WORC scores were extracted from the WORC questionnaire. The construct validity (Pearson correlations) and internal responsiveness (effect size [ES], standardized response mean [SRM], relative efficiency [RE]) of the Short-WORC were calculated. U RESULTS: The Short-WORC was strongly correlated with the WORC (r = 0.89-0.96) and moderately to strongly correlated with non-disease-specific measures at preoperative and postoperative assessments (r = 0.51-0.92). The Short-WORC and WORC were equally responsive (REShort-WORC/WORC = 1) at 0 to 6 months and highly responsive overall at 0 to 3 months (ESShort-WORC, 0.72; ESWORC, 0.92; SRMShort-WORC, 0.75; SRMWORC, 0.81) and 0 to 6 months (ESShort-WORC, 1.05; ESWORC, 1.12; SRMShort-WORC, 0.89; SRMWORC, 0.89). The responsiveness of the comparator measures (SPADI, SST, DASH, SF-12v2) was poor to moderate at 0 to 3 months (ES, 0.07-0.55; SRM, 0.09-0.49) and 0 to 6 months (ES, 0.05-0.78; SRM, 0.07-0.78). U CONCLUSION: The Short-WORC and WORC have similar responsiveness in patients undergoing RCR, and are more responsive than non-disease-specific measures. Future studies should focus on validation of the Short-WORC in samples representing the spectrum of rotator cuff disorders. J Orthop Sports Phys Ther 2018;48(5):409-418

Development of the Home Fall Hazard Checklist

Objective. Home hazard assessment is particularly important following a fracture as a means of preventing subsequent fractures. The purpose of this study was to evaluate current checklists and evidence on home hazard to develop a usable self-administered checklist that could be used by adults to assess home hazards. Design. Review and observational, prospective study. Setting. Community dwelling. Participants. Nine adults (4 men, 5 women) were asked to review the checklist and provide feedback on whether items were relevant, comprehensive, and easy to understand. Intervention. A search for literature examining the causes of falls that focused on home hazards or behaviours was conducted, and causes were extracted. Using the combined list of home hazards, a draft checklist was created. The participants were asked to pilot the checklist through their home. Primary and Secondary Outcome. An initial iteration of the checklist was modified to reduce redundancy (by grouping certain items together), improve usability (by adding a “not applicable category”), and improve readability (by removing double-barrelled questions or rewriting certain items). Results. This process resulted in 74 items in 10 areas. On average, it took 10 minutes for the participants to complete the home walk-through while filling out the checklist. Conclusion. The fall hazard-home checklist is a new checklist designed to identify home fall hazards with the intended use of being either administered by self-report through memory or supported by a walk-about, and that could potentially be completed by a patient who has incurred a fall, fracture, a family member, or caregiver. Given the expense of home hazard assessments that involve a home visit, the validity of this method of detection warrants further investigation

Association of modifiable risk factors with bone mineral density among people with distal radius fracture: A cross-sectional study

© 2019, University of Toronto Press Inc.. All rights reserved. Purpose: This study determined the extent to which modifiable risk factors (balance, muscle strength, and physical activity [PA]) explained variability in bone mineral density (BMD) among people with a recent distal radius fracture (DRF). Method: This cross-sectional study included 190 patients, aged 50–80 years, with a DRF. Participants were assessed for balance, muscle strength, PA, fracture-specific pain, and disability. Areal BMD at the femoral neck (BMD-FN) and total hip (BMD-TH) was assessed. Correlation and multiple linear regression was used to determine the contribution of modifiable risk factors to BMD. Results: Balance, handgrip strength, knee extension strength, and plantar-flexion strength had significant bivariate associations with BMD-FN. There was a weak to moderate correlation (r = 0.25–0.40; p \u3c 0.05) of balance and grip strength with BMD. Grip strength independently (p \u3c 0.05) explained 17% and 12% of the variability in BMD-FN (n = 81) and BMD-TH (n = 82), respectively. Stratified by age, balance (R2 = 0.10; p = 0.04) and grip strength (R2 = 0.32; p = 0.003) were independent significant predictors of BMD-FN among women aged 50–64 years and 65–80 years, respectively. Conclusions: Grip strength of the unaffected hand is independently associated with BMD-FN and BMD-TH in people with recent DRF. It may act as a surrogate for general bone health, frailty, or overall muscle strength rather than as a direct target for intervention