80 research outputs found
Geopolymer Materials for Low-Pressure Injections in Coarse Grained Soil: Multiscale Approach to the Study of the Mechanical Behaviour and Environmental Impact
The term soil improvement is commonly referred to the modification of soil structure in order to obtain a material with better physical and mechanical properties such as strength, stiffness or permeability. With this purpose, one of the most commonly used applications, particularly in coarse-grained soils, is the low pressure injection of cementitious mixtures. In recent years, there has been a growing demand for solutions with limited environmental impact and limited CO2 emissions and, in this regard, the cement present in the injected grout is evidently the weak point of traditional solutions. In this work, the experimental study of geopolymer materials as a substitute of cement mixture for low-pressure injection for coarse-grained soils improvement is presented. The study started with a focus on the geopolymer fresh mixture properties (density, viscosity, horizontal ellipsis ) and the evolution over the time of the mechanical properties (compression and tensile strength and stiffness) comparing three different mix designs at three different monitoring temperatures. The same evaluations were repeated on sand samples injected with the different types of mixtures previously analyzed. For a selected mix design, a permeation test was carried out under controlled conditions to test the pumpability and effectiveness of geopolymer injection. Finally, to deepen the chemical interaction between the injected mixture and interstitial water, an injection test was carried out using a scaled model of a real injection system. The experimental study carried out was aimed both at the analysis of the characteristics of the geopolymer material and at its physical interaction with coarse-grained soil, passing through the measurement of the mechanical characteristics of the geopolymer material and of the solid sand skeleton mixed with geopolymers. Finally, the possible chemical interaction of the mixtures with groundwater was also evaluated in order to highlight any environmental issues. The results shown provide a preliminary but sufficiently broad picture of the behavior of geopolymer mixtures for low-pressure injection for coarse-grained soil improvement purposes both from physical-mechanical and chemical points of view
Recommended from our members
How to identify cell material in a single ice grain emitted from Enceladus or Europa
Icy moons like Enceladus, and perhaps Europa, emit material sourced from their subsurface oceans into space via plumes of ice grains and gas. Both moons are prime targets for astrobiology investigations. Cassini measurements revealed a large compositional diversity of emitted ice grains with only 1 to 4% of Enceladus's plume ice grains containing organic material in high concentrations. Here, we report experiments simulating mass spectra of ice grains containing one bacterial cell, or fractions thereof, as encountered by advanced instruments on board future space missions to Enceladus or Europa, such as the SUrface Dust Analyzer onboard NASA's upcoming Europa Clipper mission at flyby speeds of 4 to 6 kilometers per second. Mass spectral signals characteristic of the bacteria are shown to be clearly identifiable by future missions, even if an ice grain contains much less than one cell. Our results demonstrate the advantage of analyses of individual ice grains compared to a diluted bulk sample in a heterogeneous plume
Patterning and process parameter effects in 3D suspension near-field electrospinning of nanoarrays
The extracellular matrix (ECM) contains nanofibrous proteins and proteoglycans. Nanofabrication methods have received growing interest in recent years as a means of recapitulating these elements within the ECM. Near-field electrospinning (NFES) is a versatile fibre deposition method, capable of layer-by-layer nano-fabrication. The maximum layer height is generally limited in layer-by-layer NFES as a consequence of electrostatic effects of the polymer at the surface, due to residual charge and polymer dielectric properties. This restricts the total volume achievable by layer-by-layer techniques. Surpassing this restriction presents a complex challenge, leading to research innovations aimed at increasing patterning precision, and achieving a translation from 2D to 3D additive nanofabrication. Here we investigated a means of achieving this translation through the use of 3D electrode substrates. This was addressed by in-house developed technology in which selective laser melt manufactured standing pillar electrodes were combined with a direct suspension near-field electrospinning (SNFES) technique, which implements an automated platform to manoeuvre the pillar electrodes around the emitter in order to suspend fibres in the free space between the electrode support structures. In this study SNFES was used in multiple operation modes, investigating the effects of varying process parameters, as well as pattern variations on the suspended nanoarrays. Image analysis of the nanoarrays allowed for the assessment of fibre directionality, isotropy, and diameter; identifying optimal settings to generate fibres for tissue engineering applications
Novas tecnologias construtivas e acidentes na construção civil: o caso da introdução de um novo sistema de escoramento de formas de laje
- …