Evaluation of preindustrial to present-day black carbon and its albedo forcing from ACCMIP (Atmospheric Chemistry and Climate Model Intercomparison Project)

As part of the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP), we evaluate the historical black carbon (BC) aerosols simulated by 8 ACCMIP models against observations including 12 ice core records, long-term surface mass concentrations and recent Arctic BC snowpack measurements. We also estimate BC albedo forcing by performing additional simulations using offline models with prescribed meteorology from 1996–2000. We evaluated the vertical profile of BC snow concentrations from these offline simulations using the recent BC snowpack measurements. Despite using the same BC emissions, the global BC burden differs by approximately a factor of 3 among models due to differences in aerosol removal parameterizations and simulated meteorology: 34 Gg to 103 Gg in 1850 and 82 Gg to 315 Gg in 2000. However, the global BC burden from preindustrial to present-day increases by 2.5–3 times with little variation among models, roughly matching the 2.5-fold increase in total BC emissions during the same period. We find a large divergence among models at both Northern Hemisphere (NH) and Southern Hemisphere (SH) high latitude regions for BC burden and at SH high latitude regions for deposition fluxes. The ACCMIP simulations match the observed BC surface mass concentrations well in Europe and North America except at Jungfraujoch and Ispra. However, the models fail to predict the Arctic BC seasonality due to severe underestimations during winter and spring. The simulated vertically resolved BC snow concentrations are, on average, within a factor of 2–3 of the BC snowpack measurements except for Greenland and the Arctic Ocean. For the ice core evaluation, models tend to capture both the observed temporal trends and the magnitudes well at Greenland sites. However, models fail to predict the decreasing trend of BC depositions/ice-core concentrations from the 1950s to the 1970s in most Tibetan Plateau ice cores. The distinct temporal trend at the Tibetan Plateau ice cores indicates a strong influence from Western Europe, but the modeled BC increases in that period are consistent with the emission changes in Eastern Europe, the Middle East, South and East Asia. At the Alps site, the simulated BC suggests a strong influence from Europe, which agrees with the Alps ice core observations. Models successfully simulate higher BC concentrations observed at Zuoqiupu during the non-monsoon season than monsoon season, but models underpredict BC in both seasons. Despite a large divergence in BC deposition at two Antarctic ice core sites, models are able to capture the relative increase from preindustrial to present-day seen in the ice cores. In 2000 relative to 1850, globally annually averaged BC surface albedo forcing from the offline simulations ranges from 0.014 to 0.019 W m−2 among the ACCMIP models. Comparing offline and online BC albedo forcings computed by some of the same models, we find that the global annual mean can vary by up to a factor of two because of different aerosol models or different BC-snow parameterizations and snow cover. The spatial distributions of the offline BC albedo forcing in 2000 show especially high BC forcing (i.e. over 0.1 W m−2) over Manchuria, Karakoram, and most of the Former USSR. Models predict the highest global annual mean BC forcing in 1980 rather than 2000, mostly driven by the high fossil fuel and biofuel emissions in the Former USSR in 1980

Evaluation of preindustrial to present-day black carbon and its albedo forcing from Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP)

As part of the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP), we evaluate the historical black carbon (BC) aerosols simulated by 8 ACCMIP models against observations including 12 ice core records, long-term surface mass concentrations, and recent Arctic BC snowpack measurements. We also estimate BC albedo forcing by performing additional simulations using offline models with prescribed meteorology from 1996-2000. We evaluate the vertical profile of BC snow concentrations from these offline simulations using the recent BC snowpack measurements. Despite using the same BC emissions, the global BC burden differs by approximately a factor of 3 among models due to differences in aerosol removal parameterizations and simulated meteorology: 34 Gg to 103 Gg in 1850 and 82 Gg to 315 Gg in 2000. However, the global BC burden from preindustrial to present-day increases by 2.5-3 times with little variation among models, roughly matching the 2.5-fold increase in total BC emissions during the same period. We find a large divergence among models at both Northern Hemisphere (NH) and Southern Hemisphere (SH) high latitude regions for BC burden and at SH high latitude regions for deposition fluxes. The ACCMIP simulations match the observed BC surface mass concentrations well in Europe and North America except at Ispra. However, the models fail to predict the Arctic BC seasonality due to severe under-estimations during winter and spring. The simulated vertically resolved BC snow concentrations are, on average, within a factor of 2-3 of the BC snowpack measurements except for Greenland and the Arctic Ocean. For the ice core evaluation, models tend to adequately capture both the observed temporal trends and the magnitudes at Greenland sites. However, models fail to predict the decreasing trend of BC depositions/ice core concentrations from the 1950s to the 1970s in most Tibetan Plateau ice cores. The distinct temporal trend at the Tibetan Plateau ice cores indicates a strong influence from Western Europe, but the modeled BC increases in that period are consistent with the emission changes in Eastern Europe, the Middle East, South and East Asia. At the Alps site, the simulated BC suggests a strong influence from Europe, which agrees with the Alps ice core observations. At Zuoqiupu on the Tibetan Plateau, models successfully simulate the higher BC concentrations observed during the non-monsoon season compared to the monsoon season but overpredict BC in both seasons. Despite a large divergence in BC deposition at two Antarctic ice core sites, some models with a BC lifetime of less than 7 days are able to capture the observed concentrations. In 2000 relative to 1850, globally and annually averaged BC surface albedo forcing from the offline simulations ranges from 0.014 to 0.019 W m(-2) among the ACCMIP models. Comparing offline and online BC albedo forcings computed by some of the same models, we find that the global annual mean can vary by up to a factor of two because of different aerosol models or different BC-snow parameterizations and snow cover. The spatial distributions of the offline BC albedo forcing in 2000 show especially high BC forcing (i.e., over 0.1 W m(-2)) over Manchuria, Karakoram, and most of the Former USSR. Models predict the highest global annual mean BC forcing in 1980 rather than 2000, mostly driven by the high fossil fuel and biofuel emissions in the Former USSR in 1980.</p

Determination of gamma and-2 beta(s) from charmless two-body decays of beauty mesons

Using the latest LHCb measurements of time-dependent CP violation in the B-s(0) -> K+K- decay, a U-spin relation between the decay amplitudes of B-s(0) -> K+K- and B-0 -> p(+)p(-) decay processes allows constraints to be placed on the angle gamma of the unitarity triangle and on the B-s(0) mixing phase -2 beta(s). Results from an extended approach, which uses additional inputs on B-0 -> pi(0)pi(0) and B+ -> pi(+)pi(0) decays from other experiments and exploits isospin symmetry, are also presented. The dependence of the results on the maximum allowed amount of U-spin breaking is studied. At 68% probability, the value gamma =( 63.5(-6.7)(+7.2))degrees modulo 180 degrees is determined. In an alternative analysis, the value -2 beta(s)= - 0.12(-0.16)(+ 0.14) rad is found. In both measurements, the uncertainties due to U-spin breaking effects up to 50% are included. (C) 2014 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/3.0/)

B flavour tagging using charm decays at the LHCb experiment

An algorithm is described for tagging the flavour content at production of neutral B mesons in the LHCb experiment. The algorithm exploits the correlation of the flavour of a B meson with the charge of a reconstructed secondary charm hadron from the decay of the other b hadron produced in the proton-proton collision. Charm hadron candidates are identified in a number of fully or partially reconstructed Cabibbo-favoured decay modes. The algorithm is calibrated on the self-tagged decay modes B+ -> J/psi K+ and B-0 -> J/psi K*(0) using 3.0fb(-1) of data collected by the LHCb experiment at pp centre-of-mass energies of 7TeV and 8TeV. Its tagging power on these samples of B -> J/psi X decays is (0.30 +/- 0.01 +/- 0.01) %

Identification of beauty and charm quark jets at LHCb

Identification of jets originating from beauty and charm quarks is important for measuring Standard Model processes and for searching for new physics. The performance of algorithms developed to select b- and c-quark jets is measured using data recorded by LHCb from proton-proton collisions at root s = 7TeV in 2011 and at root s = 8TeV in 2012. The efficiency for identifying a b (c) jet is about 65%(25%) with a probability for misidentifying a light-parton jet of 0.3% for jets with transverse momentum pT > 20GeV and pseudorapidity 2 : 2 < eta < 4.2. The dependence of the performance on the pT and eta of the jet is also measured

Study of the rare B-s(0) and B-0 decays into the pi(+) pi(-) mu(+) mu(-) final state

A search for the rare decays B-s(0) -> pi(+) pi-mu(+) mu-and B-0 -> pi(+) pi-mu(+) mu-is performed in a data set corresponding to an integrated luminosity of 3.0 fb(-1) collected by the LHCb detector in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. Decay candidates with pion pairs that have invariant mass in the range 0.5-1.3GeV/c(2) and with muon pairs that do not originate from a resonance are considered. The first observation of the decay B-s(0) -> pi(+) pi-mu(+) mu- and the first evidence of the decay B-0 -> pi(+) pi-mu(+) mu-are obtained and the branching fractions, restricted to the dipion-mass range considered, are measured to be B(B-s(0) -> pi(+) pi-mu(+) mu(-)) =(8.6 +/- 1.5(stat) +/- 0.7(syst) +/- 0.7 (norm)) x 10(-8) and B(B-0 -> pi(+) pi-mu(+) mu(-)) =(2.11 +/- 0.51(stat) +/- 0.15(syst) +/- 0.16(norm)) x10(-8), where the third uncertainty is due to the branching fraction of the decay B-0. -> J/Psi(mu(+) mu(-)) K*(892)(0)(-> K+ pi(-)), used as a normalisation. (C) 2015 The Authors. Published by Elsevier B.V

Measurement of the CP-violating phase beta in B-0 -> J/psi pi(+)pi(-) decays and limits on penguin effects

Time-dependent CP violation is measured in the (B-0) over bar -> J/psi pi(+)pi(-) p-channel for each pi(+)pi(-) resonant final state using data collected with an integrated luminosity of 3.0 fb(-1) in pp collisions using the LHCb detector. The final state with the largest rate, J/psi rho(0)(770), is used to measure the CP-violating angle 2 beta(eff) to be (41.7 +/- 9.6(-6.3)(+2.8)).. This result can be used to limit the size of penguin amplitude contributions to CPviolation measurements in, for example, (B-0) over bar -> J/psi pi(+)pi(-) decays. Assuming approximate SU(3) flavour symmetry and neglecting higher order diagrams, the shift in the CP-violating phase phi(s) limited to be within the interval [-1.05 degrees, + 1.18 degrees] at 95% confidence level. Changes to the limit due to SU(3) symmetry breaking effects are also discussed. (C) 2015 The Authors. Published by Elsevier B.V

LHCb detector performance

The LHCb detector is a forward spectrometer at the Large Hadron Collider (LHC) at CERN. The experiment is designed for precision measurements of CP violation and rare decays of beauty and charm hadrons. In this paper the performance of the various LHCb sub-detectors and the trigger system are described, using data taken from 2010 to 2012. It is shown that the design criteria of the experiment have been met. The excellent performance of the detector has allowed the LHCb collaboration to publish a wide range of physics results, demonstrating LHCb's unique role, both as a heavy flavour experiment and as a general purpose detector in the forward region

Observation of the B0→ρ0ρ0 decay from an amplitude analysis of B0→(π+π−)(π+π−) decays

Proton-proton collision data recorded in 2011 and 2012 by the LHCb experiment, corresponding to an integrated luminosity of 3.0 fb(-1), are analysed to search for the charmless B-0 -> rho(0)rho(0) decay. More than 600 B-0 -> (pi(+)pi(-))(pi(+)pi(-)) signal decays are selected and used to perform an amplitude, analysis, under the assumption of no CP violation in the decay, from which the B-0 -> rho(0)rho(0) decay is observed for the first time with 7.1 standard deviations significance. The fraction of B-0 -> rho(0)rho(0) decays yielding a longitudinally polarised final state is measured to be f(L) = 0.745(-0.058)(+0.048)(stat) +/- 0.034(syst). The B-0 -> rho(0)rho(0) branching fraction, using the B-0 -> phi K*(892)(0) decay as reference, is also reported as B(B-0 -> rho(0)rho(0)) = (0.94 +/- 0.17(stat) +/- 0.09(syst) +/- 0.06(BF)) x 10(-6). (C) 2015 CERN for the benefit of the LHCb Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY licens