Coffee Grounds as a Soil Conditioner: Effects on Physical and Mechanical Properties - I. Effects on Physical Properties

Coffee grounds (CG) improved some soil physical properties (dry density, gd; porosity, n; aggregation; hydraulic conductivity, Ks; and infiltration rate, IR). Effects on other properties were inconsistent (e.g., sorptivity, S), or unfavorable (e.g., available water, AW). gd decreased and n increased with CG. CG decreased Ks in sand. In calcareous soil, maximum increase was associated with 10% and 15% CG before and after wetting-and-drying cycles (WDC), respectively. Ks increased with CG in clay, with greatest increase attained at 10% CG. IR decreased with CG in sand. In calcareous and clayey soils, IR decreased with CG before WDC but increased after WDC where maximum increase in clay was linked to 10% CG. No solid trends of soil sorptivity, S, were identified. Before WDC, S had the order: sand > calcareous > clay. For most cases, adding CG increased total water holding capacity (WHC). However, after WDC, the increase in water content at field capacity (FC) with CG was accompanied by a greater increase in wilting point (WP) and therefore a decrease in AW. CG improved soil structure and aggregation and increased non-water-stable aggregates in calcareous and clayey soils. Mean weight diameter (MWD) indicated increase in water-stable aggregates in sand at 5% and 10% CG. In clay, MWD increased only at 5% CG. Although results did not show coherent responses with some tested properties, they, mostly, indicate some beneficial effects of CG, particularly in relation to improving aggregation and water flow

Pseudocapacitance of MXene nanosheets for high-power sodium-ion hybrid capacitors

High-power Na-ion batteries have tremendous potential in various large-scale applications. However, conventional charge storage through ion intercalation or double-layer formation cannot satisfy the requirements of such applications owing to the slow kinetics of ion intercalation and the small capacitance of the double layer. The present work demonstrates that the pseudocapacitance of the nanosheet compound MXene Ti2C achieves a higher specific capacity relative to double-layer capacitor electrodes and a higher rate capability relative to ion intercalation electrodes. By utilizing the pseudocapacitance as a negative electrode, the prototype Na-ion full cell consisting of an alluaudite Na2Fe2(SO4)3 positive electrode and an MXene Ti2C negative electrode operates at a relatively high voltage of 2.4V and delivers 90 and 40mAhg-1 at 1.0 and 5.0Ag -1 (based on the weight of the negative electrode), respectively, which are not attainable by conventional electrochemical energy storage systems

Synthesis and DFT investigation of new bismuth-containing MAX phases

The M(n + 1)AX(n) phases (M = early transition metal; A = group A element and X = C and N) are materials exhibiting many important metallic and ceramic properties. In the present study powder processing experiments and density functional theory calculations are employed in parallel to examine formation of Zr(2)(Al(1−x)Bi(x))C (0 ≤ x ≤ 1). Here we show that Zr(2)(Al(1−x)Bi(x))C, and particularly with x ≈ 0.58, can be formed from powders even though the end members Zr(2)BiC and Zr(2)AlC seemingly cannot. This represents a significant extension of the MAX phase family, as this is the first report of a bismuth-based MAX phase

High capacity silicon anodes enabled by MXene viscous aqueous ink

The ever-increasing demands for advanced lithium-ion batteries have greatly stimulated the quest for robust electrodes with a high areal capacity. Producing thick electrodes from a high-performance active material would maximize this parameter. However, above a critical thickness, solution-processed films typically encounter electrical/mechanical problems, limiting the achievable areal capacity and rate performance as a result. Herein, we show that two-dimensional titanium carbide or carbonitride nanosheets, known as MXenes, can be used as a conductive binder for silicon electrodes produced by a simple and scalable slurry-casting technique without the need of any other additives. The nanosheets form a continuous metallic network, enable fast charge transport and provide good mechanical reinforcement for the thick electrode (up to 450 µm). Consequently, very high areal capacity anodes (up to 23.3 mAh cm−2) have been demonstrated

Performing the Egyptian revolution : origins of collective restraint action in the Midan

This research was supported by a Carnegie Trust for the Universities of Scotland grant.In January/February 2011, the world watched with admiration the Egyptian revolution that toppled President Housni Mubarak. The demonstration in Midan al-Tahrir (Liberation Square in central Cairo), which was the nucleus of the revolution, highlighted a largely spontaneous, civil and peaceful political performance. However, this performance was temporary, contradicting subsequent bloody conflicts in post-revolutionary Egypt. This article examines the socio-political origins of the Midan performance. It argues that the demonstrators exercised collective restraint, which was temporary but necessary, in order to topple Mubarak. Building on Norbert Elias’ civilising process theory and social movements literature, it is argued that the origins of this performance are found in a collective knowledge of regime strategy and narrative, Egyptian socio-political values and existing repertoires of contention. Drawing on primary sources and semi-structured interviews, the article contends that the demonstrators exercised collective restraint to reframe regime narrative and draw public support for the revolution.PostprintPeer reviewe

Two-Dimensional Vanadium Carbide (MXene) as Positive Electrode for Sodium-Ion Capacitors

Ion capacitors store energy through intercalation of cations into an electrode at a faster rate than in batteries and within a larger potential window. These devices reach a higher energy density compared to electrochemical double layer capacitor. Li-ion capacitors are already produced commercially, but the development of Na-ion capacitors is hindered by lack of materials that would allow fast intercalation of Na-ions. Here we investigated the electrochemical behavior of 2D vanadium carbide, V2C, from the MXene family. We investigated the mechanism of Na intercalation by XRD and achieved capacitance of ∼100 F/g at 0.2 mV/s. We assembled a full cell with hard carbon as negative electrode, a known anode material for Na ion batteries, and achieved capacity of 50 mAh/g with a maximum cell voltage of 3.5 V

Molecular Pathological Classification of Colorectal Cancer

Colorectal cancer (CRC) shows variable underlying molecular changes with two major mechanisms of genetic instability: chromosomal instability and microsatellite instability. This review aims to delineate the different pathways of colorectal carcinogenesis and provide an overview of the most recent advances in molecular pathological classification systems for colorectal cancer. Two molecular pathological classification systems for CRC have recently been proposed. Integrated molecular analysis by The Cancer Genome Atlas project is based on a wide-ranging genomic and transcriptomic characterisation study of CRC using array-based and sequencing technologies. This approach classified CRC into two major groups consistent with previous classification systems: (1) ∼16 % hypermutated cancers with either microsatellite instability (MSI) due to defective mismatch repair (∼13 %) or ultramutated cancers with DNA polymerase epsilon proofreading mutations (∼3 %); and (2) ∼84 % non-hypermutated, microsatellite stable (MSS) cancers with a high frequency of DNA somatic copy number alterations, which showed common mutations in APC, TP53, KRAS, SMAD4, and PIK3CA. The recent Consensus Molecular Subtypes (CMS) Consortium analysing CRC expression profiling data from multiple studies described four CMS groups: almost all hypermutated MSI cancers fell into the first category CMS1 (MSI-immune, 14 %) with the remaining MSS cancers subcategorised into three groups of CMS2 (canonical, 37 %), CMS3 (metabolic, 13 %) and CMS4 (mesenchymal, 23 %), with a residual unclassified group (mixed features, 13 %). Although further research is required to validate these two systems, they may be useful for clinical trial designs and future post-surgical adjuvant treatment decisions, particularly for tumours with aggressive features or predicted responsiveness to immune checkpoint blockade

Metal Cation Pre Intercalated Ti3C2Tx MXene as Ultra High Areal Capacitance Electrodes for Aqueous Supercapacitors

Two dimensional transition metal carbides and nitrides MXenes have demonstrated great potential as electrode materials for electrochemical energy storage systems. This is especially true for delaminated Ti3C2Tx, which already shows outstanding gravimetric and volumetric capacitance, with areal capacitance limited by thickness only a few microns . However, the performance of multilayer Ti3C2Tx has been more modest. Here, we report on using metal cation viz., Na , K , and Mg2 pre intercalated multilayer Ti3C2Tx as electrodes for aqueous supercapacitors. These electrodes are scalable and amenable to roll to roll manufacturing, with adjustable areal loadings of 5.2 to 20.1 mg cm2. K Ti3C2Tx exhibited the highest capacitances at different scan rates. A gravimetric capacitance comparable to that of delaminated MXene of up to 300 F g was achieved for multilayer K Ti3C2Tx but with an outstanding ultra high areal capacitance of up to 5.7 F cm2, which is 10 fold higher than the 0.5 F cm2 of delaminated MXene and exceeds the 4.0 F cm2 of microengineered MXene electrode