Quantifying crystal form content in physical mixtures of (±)-tartaric acid and (+)-tartaric acid using near infrared reflectance spectroscopy

The objective of this study was to use diffuse reflectance near infrared spectroscopy (NIRS) to determine racemic compound content in physical mixtures composed primarily of the enantiomorph and to assess the error, instrument reproducibility and limits of detection (LOD) and quantification (LOQ) of the method. Physical mixtures ranging from 0 to 25% (±)-tartaric acid in (+)-tartaric acid were prepared and spectra of the powder samples contained in glass vials were obtained using a Foss NIRSystems Model 5000 monochrometer equipped with a Rapid Content Analyzer scanning from 1100 to 2500 nm. A calibration curve was constructed by plotting (±)-tartaric acid weight percent against the 2nd derivative values of log (1/R) vs λ at a single wavelength, normalized with a denominator wavelength (1480 nm/1280 nm). Excellent linearity was observed (R2=0.9999). The standard error of calibration (SEC) was 0.07 and the standard error of prediction (SEP) for the validation set was 0.11. Instrument and method errors for samples in the 2% composition range ((±)-tartaric acid in (+)-tartaric acid) were less than 1% RSD and 3% RSD, respectively. The practical LOD and LOQ were 0.1% and 0.5%, respectively, and comparable to the calculated LOD and LOQ. These studies show that NIRS can be used as a rapid and sensitive quantitative method for determining racemate content in the presence of the enatiomerically pure crystal in the solid-state

Influence of Formulation and Processing Factors on Stability of Levothyroxine Sodium Pentahydrate

Stability of formulations over shelf-life is critical for having a quality product. Choice of excipients, manufacturing process, storage conditions, and packaging can either mitigate or enhance the degradation of the active pharmaceutical ingredient (API), affecting potency and/or stability. The purpose was to investigate the influence of processing and formulation factors on stability of levothyroxine (API). The API was stored at long-term (25°C/60%RH), accelerated (40°C/75%RH), and low-humidity (25°C/0%RH and 40°C/0%RH) conditions for 28 days. Effect of moisture loss was evaluated by drying it (room temperature, N2) and placed at 25°C/0%RH and 40°C/0%RH. The API was incubated with various excipients (based on package insert of marketed tablets) in either 1:1, 1:10, or 1:100 ratios with 5% moisture at 60°C. Commonly used ratios for excipients were used. The equilibrium sorption data was collected on the API and excipients. The API was stable in solid state for the study duration under all conditions for both forms (potency between 90% and 110%). Excipients effect on stability varied and crospovidone, povidone, and sodium laurel sulfate (SLS) caused significant API degradation where deiodination and deamination occurred. Moisture sorption values were different across excipients. Crospovidone and povidone were hygroscopic whereas SLS showed deliquescence at high RH. The transient formulation procedures where temperature might go up or humidity might go down would not have major impact on the API stability. Excipients influence stability and if possible, those three should either be avoided or used in minimum quantity which could provide more stable tablet formulations with minimum potency loss throughout its shelf-life

Theophylline cocrystals prepared by spray drying: Physicochemical properties and aerosolization performance

The purpose of this work was to characterize theophylline (THF) cocrystals prepared by spray drying in terms of the physicochemical properties and inhalation performance when aerosolized from a dry powder inhaler. Cocrystals of theophylline with urea (THF-URE), saccharin (THF-SAC) and nicotinamide (THF-NIC) were prepared by spray drying. Milled THF and THF-SAC cocrystals were also used for comparison. The physical purity, particle size, particle morphology and surface energy of the materials were determined. The in vitro aerosol performance of the spray-dried cocrystals, drug-alone and a drug-carrier aerosol, was assessed. The spray-dried particles had different size distributions, morphologies and surface energies. The milled samples had higher surface energy than those prepared by spray drying. Good agreement was observed between multi-stage liquid impinger and next-generation impactor in terms of assessing spray-dried THF particles. The fine particle fractions of both formulations were similar for THF, but drug-alone formulations outperformed drug-carrier formulations for the THF cocrystals. The aerosolization performance of different THF cocrystals was within the following rank order as obtained from both drug-alone and drug-carrier formulations: THF-NIC > THF-URE > THF-SAC. It was proposed that micromeritic properties dominate over particle surface energy in terms of determining the aerosol performance of THF cocrystals. Spray drying could be a potential technique for preparing cocrystals with modified physical properties. © 2013 American Association of Pharmaceutical Scientists

Excipient selection can significantly affect solid-state phase transformation in formulation during wet granulation

Phase transformations in formulations can lead to instability in physicochemical, biopharmaceutical, and processing properties of products. The influences of formulation design on the optimal dosage forms should be specified. The aim here was to investigate whether excipients with different water sorption behavior affect hydrate formation of nitrofurantoin in wet masses. Nitrofurantoin anhydrate was used as a hydrate-forming model drug, and 4 excipients with different water-absorbing potential (amorphous low-substituted hydroxypropylcellulose, modified maize starch, partially amorphous silicified microcrystalline cellulose, and crystalline α-lactose monohydrate) were granulated with varying amounts of purified water. Off-line evaluation of wet masses containing nitrofurantoin anhydrate and excipient (1∶1) was performed using an X-ray powder diffractometer (XRPD) and near-infrared spectroscopy, and drying phase was evaluated by variable temperature XRPD. Only amorphous excipient in the formulation retarded hydrate formation of an active pharmaceutical ingredient (API) at high water contents. Hygroscopic partially crystalline excipient hindered hydrate formation of API at low water contents. Crystalline excipient was unable to control hydrate formation of API. The character of excipient affects the stability of formulation. Thus, correct selection of excipients for the formulation can control processing-induced phase transitions and improve the storage stability of the final dosage form

Formulation and Evaluation of a Protein-loaded Solid Dispersions by Non-destructive Methods

The purpose of this investigation was to develop solid dispersion (SD) formulation of cyclosporine (CyA) using polyethylene glycol (PEG-6000) to enhance its dissolution rate followed by nondestructive method for the prediction of both drug and carrier. SD formulations were prepared by varying the ratio of CyA and PEG-6000 by solvent evaporation technique and characterized by dissolution, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), powder X-ray diffraction (PXRD), near infrared (NIR) and near infrared chemical imaging (NIR-CI). Dissolution data revealed enhanced dissolution of CyA when compared with pure CyA. DSC results showed that the crystallinity of PEG-6000 has decreased as indicated by decrease in the enthalpy of fusion and melting peak in the formulations. FTIR data demonstrated no chemical interaction between drug and carrier. The surface morphology of SD formulations was similar to PEG-6000 particle. NIR-CI disclosed homogeneity of SD matrix as indicated by symmetrical histograms with smaller values of skewness. Similar to NIR, a multivariate peak evaluation with principal component analysis and partial least square (PLS) were carried out with PXRD spectral data. PLS models with both techniques showed good correlation coefficient and smaller value of root mean square of errors. The accuracy of model for predicting CyA and PEG-6000 in NIR and PXRD data were 5.22%, 5.35%, 5.27%, and 2.10%, respectively. In summary, chemometric applications of non-destructive method sensors provided a valuable means of characterization and estimation of drug and carrier in the novel formulations