Dynamic Parameters to Characterize the Thermal Behaviour of a Layer Subject to Periodic Phase Changes

Abstract The paper addresses the issue of the dynamic characterization of a layer subject to phase change (PCM) with non-sinusoidal periodic boundary conditions, which are typical of the external walls of air-conditioned building. The dynamic parameters used to characterize a monophase layer are not sufficient to describe how the temperature and heat flux trends in transfer through a layer subject to phase change are modified. Furthermore, a PCM due to the effect of latent heat associated with the phase change significantly modifies the heat storage capacity of the wall. The proposed parameters are determined by means of an explicit finite difference numerical model, considering PCM with different melting temperatures and thermophysical properties. The boundary conditions are such that one or more bi-phase interfaces originate in the layer. These parameters can be used for the thermal design of innovative walls in air-conditioned buildings with the aim of reducing power peaks entering the indoor environment, or to reduce thermal requirements, or to improve the thermal comfort within the building

A multilayer panel in cork and natural phase change materials: thermal and energy analysis

This paper presents thermal and energy analysis of a multilayer panel in bio-based cork material and natural phase change materials (PCMs) for the development of prefabricated, recyclable and energy-efficient and autonomous building modules. For this purpose, a calculation tool is developed for the dynamic simulation of the thermal and energy behaviour of the sandwich panel. In particular, through an extensive parametric survey, the panel is sized with the identification of the arrangement of the layers, PCM temperature, and layer thicknesses to optimize the insulating and damping properties, considering typical climatic conditions of the Mediterranean climates of Southern Italy. From the conducted simulations, the types of sandwich panels that have the best insulating and storage characteristics for the building module construction were chosen. The results of these simulations will be used in future research for the preliminary design of tests to be carried out in a climatic chamber and to build a building module in real conditions to be constantly monitored through the automatic instrumental survey of internal and external physical quantities such as temperature, humidity and radiant temperature

Lp-cohomology of negatively curved manifolds

We compute the $L^p$-cohomology spaces of some negatively curved manifolds. We deal with two cases: manifolds with finite volume and sufficiently pinched negative curvature, and conformally compact manifolds

Effects of submerged vegetation on water clarity across climates

A positive feedback between submerged vegetation and water clarity forms the backbone of the alternative state theory in shallow lakes. The water clearing effect of aquatic vegetation may be caused by different physical, chemical, and biological mechanisms and has been studied mainly in temperate lakes. Recent work suggests differences in biotic interactions between (sub)tropical and cooler lakes might result in a less pronounced clearing effect in the (sub)tropics. To assess whether the effect of submerged vegetation changes with climate, we sampled 83 lakes over a gradient ranging from the tundra to the tropics in South America. Judged from a comparison of water clarity inside and outside vegetation beds, the vegetation appeared to have a similar positive effect on the water clarity across all climatic regions studied. However, the local clearing effect of vegetation decreased steeply with the contribution of humic substances to the underwater light attenuation. Looking at turbidity on a whole-lake scale, results were more difficult to interpret. Although lakes with abundant vegetation (>30%) were generally clear, sparsely vegetated lakes differed widely in clarity. Overall, the effect of vegetation on water clarity in our lakes appears to be smaller than that found in various Northern hemisphere studies. This might be explained by differences in fish communities and their relation to vegetation. For instance, unlike in Northern hemisphere studies, we find no clear relation between vegetation coverage and fish abundance or their diet preference. High densities of omnivorous fish and coinciding low grazing pressures on phytoplankton in the (sub)tropics may, furthermore, weaken the effect of vegetation on water clarity

Climate-dependent CO2 emissions from lakes

Inland waters, just as the world's oceans, play an important role in the global carbon cycle. While lakes and reservoirs typically emit CO2, they also bury carbon in their sediment. The net CO2 emission is largely the result of the decomposition or preservation of terrestrially supplied carbon. What regulates the balance between CO2 emission and carbon burial is not known, but climate change and temperature have been hypothesized to influence both processes. We analyzed patterns in carbon dioxide partial pressure (pCO2) in 83 shallow lakes over a large climatic gradient in South America and found a strong, positive correlation with temperature. The higher pCO2 in warmer lakes may be caused by a higher, temperature-dependent mineralization of organic carbon. This pattern suggests that cool lakes may start to emit more CO2 when they warm up because of climate ch

Energy Independence of a Small Office Community Powered by Photovoltaic-Wind Hybrid Systems in Widely Different Climates

Hybrid renewable energy systems are an optimal solution for small energy communities’ energy supply. One of the critical issues is the strong correlation of these systems with outdoor climatic conditions. The goal is to make local communities increasingly energy independent. To this end, an in-depth analysis of the behaviour of hybrid photovoltaic (PV)–wind systems powering small office communities in 48 locations around the world characterized by widely varying climates was conducted. System sizes, assumed to be stand-alone or grid-connected, were varied, for a total of 343 system power configurations. Highest satisfied load fraction (SLF) values are obtained with a significant predominance of PV over wind; the trend is more pronounced in dry and continental climates (zones B and D according to the Köppen climate classification). The utilization factor (UF) values of 1 are rarely reached and never in the wind-only or PV-only configurations. In all climates, the grid energy interaction factor (GEIF) values of zero are never reached but come very close. The benefit-cost ratio (BCR) of grid-connected systems is significantly higher than stand-alone systems

Dynamic Thermal Characteristics of Opaque Building Components. A Proposal for the Extension of EN ISO 13786

Abstract In order to dynamically characterise the opaque components of a building envelope subject to sinusoidal loadings in steady periodic regime conditions, the use of nondimensional periodic thermal transmittance is proposed. Such a parameter allows for the evaluation of the decrement factor and time lag that the heat flux undergoes while crossing the wall and the efficiency of the heat storage. For non-sinusoidal loadings, dynamic characterisation is obtained by the decrement factor, defined as the ratio between energy in a semi period entering the indoor environment and entering the wall and as the ratio between maximum heat fluxes entering the environment and the wall, and as the ratio between the minimum heat fluxes. These parameters allow to determine the heat storage capacity of the component, the maximum heat flux in summer and winter conditions and their time lags. The defined dynamic properties were calculated considering two commonly used walls and surrounding conditions that are representative of the effective operative conditions

Disposal of green roofs: A contribution to identifying an “Allowed by legislation” end–of–life scenario and facilitating their environmental analysis

The rapid and widespread deployment of green roofs requires the need to address their disposal and to assess the environmental impact of this phase of their life cycle to understand whether their current large-scale application may pose a problem. A review of the literature on green roofs environmental performance (particularly Life Cycle Assessment studies) has highlighted the lack of a standardized, commonly adopted, procedure for determining the treatments, recovery and/or disposal, to be assigned to waste from the removal of green roofs. In this regard, it should be mentioned that there is a lack of ad hoc legislation on the disposal of this technology (to the best of the authors’ knowledge, even at the international level). In this paper, an attempt procedure is introduced to identify the end-of-life scenario of green roofs that does not conflict with the current regulations regarding wastes. Specifically, the procedure relies on an “attempt classification” of the waste from individual green roof elements and the priority criterion for intervention. This procedure might thus be used temporarily by technicians, pending the issuance of guidelines specifically dedicated to green roofs disposal, to model their end-of-life and thus assess the environmental impact of this phase of the life cycle. The feasibility of this proposal was verified through a field application. Besides the methodological proposal, the results of the work indicated the need to review the current waste legislation and update it -at least the Italian one - to also consider new materials used in green transition technologies

Eco-Sustainable Energy Production in Healthcare: Trends and Challenges in Renewable Energy Systems

The shift from fossil fuels to renewable energy systems represents a pivotal step toward the realization of a sustainable society. This study aims to analyze representative scientific literature on eco-sustainable energy production in the healthcare sector, particularly in hospitals. Given hospitals’ substantial electricity consumption, the adoption of renewable energy offers a reliable, low-CO2 emission solution. The COVID-19 pandemic has underscored the urgency for energy-efficient and environmentally-responsible approaches. This brief review analyzes the development of experimental, simulation, and optimization projects for sustainable energy production in healthcare facilities. The analysis reveals trends and challenges in renewable energy systems, offering valuable insights into the potential of eco-sustainable solutions in the healthcare sector. The findings indicate that hydrogen storage systems are consistently coupled with photovoltaic panels or solar collectors, but only 14% of the analyzed studies explore this potential within hospital settings. Hybrid renewable energy systems (HRES) could be used to meet the energy demands of healthcare centers and hospitals. However, the integration of HRES in hospitals and medical buildings is understudied