Designing assistive technology for getting more independence for blind people when performing everyday tasks: an auditory-based tool as a case study

Everyday activities and tasks should in theory be easily carried by everyone, including the blind. Information and Communication Technology (ICT) has been widely used for supporting solutions. However, the solutions can be problematic for the visually impaired since familiarity with digital devices is often required. Or, indeed the procedure can be perceived as fiddly or impractical particularly for repetitive tasks due to the number/type of steps required to complete the task. This paper introduces a simple audio-based tool aimed at supporting visually-impaired people in the seemingly simple activity of checking whether the light in a room is on or off. It is an example of potential low tech devices that can be designed without the need for specific skills or knowledge by the user, and that functions in a practical way. In this context, we discuss the main issues and considerations for totally blind users in identifying whether a light is switched on. The proposed prototype is based on a simple circuit and a form of auditory feedback which informs the user whether they are switching on or off the light. Two prototypes have been designed and built for two different kinds of installation. For the subsequent second prototype, three different versions are proposed to provide a blind person with further support in easily identifying the light status at home. The new design includes enhanced auditory feedback and modifications to the dimensions. The evaluation conducted by involving various groups of end-users revealed the usefulness of the proposed tool. In addition, a survey conducted with 100 visually-impaired people reported the limitations and difficulties encountered by the blind in using existing devices. Moreover, the study revealed the interest from 94% of the participants for a potential (new) basic tool integrable with the existing lighting system. This study gives a contribution in the ambient intelligence field by (1) showing how an auditory-based tool can be used to support totally blind people to check the lights in an autonomous and relatively simple way; (2) proposing an idea that can be exploited in other application cases that use light feedback; and (3) proposing seven potential recommendations for designing assistive technology tools and common everyday devices, based on information gathered from the online survey

Pre-test CFD simulations of the NACIE-UP BFPS test section

The present paper is focused on the CFD pre-test analysis and design of the new experimental facility Blocked Fuel Pin bundle Simulator (BFPS) that will be installed into the NACIE-UP (NAtural CIrculation Experiment-UPgrade) facility located at the ENEA Brasimone Research Center (Italy). The BFPS test section will carry out suitable experiments to fully investigate different flow blockage regimes in a 19 fuel pin bundle providing experimental data in support of the development of the ALFRED (Advanced Lead-cooled Fast Reactor European Demonstrator) LFR DEMO. The geometrical domain of the fuel pin bundle simulator was designed to reproduce the geometrical features of ALFRED, e.g. the external wrapper in the active region and the spacer grids. Pre-tests calculations were carried out by applying accurate boundary conditions; the conjugate heat transfer in the clad is also considered. The blockages investigated are internal blockages of different extensions and in different locations: central sub-channel blockage, corner sub-channel blockage, edge sub-channel blockage, one sector blockage, and two-sector blockage. RANS simulations were carried out adopting the ANSYS CFX commercial code with the laminar sublayer resolved by the mesh resolution. The loci of the peak temperatures and their width as predicted by the CFD simulations are used for determining the location of the pin bundle instrumentation. The CFD pre-test analysis allowed also investigating the temperature distribution in the clad to operate the test section safely

Post-test simulations for the NACIE-UP benchmark by STH codes

This paper illustrates the results obtained in the last phase of the NACIE-UP benchmark activity foreseen inside the EU SESAME Project. The purpose of this research activity, performed by system thermal–hydraulic (STH) codes, is finalized to the improvement, development and validation of existing STH codes for Heavy Liquid Metal (HLM) systems. All the participants improved their modelling of the NACIE-UP facility, respect to the initial blind simulation phase, adopting the actual experimental boundary conditions and reducing as much as possible sources of uncertainty in their numerical model. Four different STH codes were employed by the participants to the benchmark to model the NACIE-UP facility, namely: CATHARE for ENEA, ATHLET for GRS, RELAP5-3D© for the “Sapienza” University of Rome and RELAP5/Mod3.3(modified) for the University of Pisa. Three reference tests foreseen in the NACIE-UP benchmark and carried out at ENEA Brasimone Research Centre were analysed from four participants. The data from the post-test analyses, performed independently by the participant using different STH codes, were compared together and with the available experimental results and critically discussed

STH-CFD codes coupled calculations applied to HLM loop and pool systems

This work describes the coupling methodology between a modified version of RELAP5/Mod3.3 and ANSYS Fluent CFD code developed at the University of Pisa. The described coupling procedure can be classified as "two-way," nonoverlapping, "online" coupling. In this work, a semi-implicit numerical scheme has been implemented, giving greater stability to the simulations. A MATLAB script manages both the codes, oversees the reading and writing of the boundary conditions at the interfaces, and handles the exchange of data. A new tool was used to control the Fluent session, allowing a reduction of the time required for the exchange of data. The coupling tool was used to simulate a loop system (NACIE facility) and a pool system (CIRCE facility), both working with Lead Bismuth Eutectic and located at ENEA Brasimone Research Centre. Some modifications in the coupling procedure turned out to be necessary to apply the methodology in the pool system. In this paper, the comparison between the obtained coupled numerical results and the experimental data is presented. The good agreement between experiments and calculations evinces the capability of the coupled calculation to model correctly the involved phenomena

Experimental and RELAP5-3D results on IELLLO (Integrated European Lead Lithium LOop) operation

The experimental facility IELLLO (Integrated European Lead Lithium LOop) was designed and installed at the ENEA Brasimone Research Centre to support the design of the HCLL TBM (Helium Cooled Lithium Lead Test Blanket Module).This work presents the results of the experimental campaign carried out within the framework of F4E-FPA-372 and which had three main objectives. First, to produce new experimental data for flowing LLE (Lead-Lithium Eutectic) for an analysis of the loop and the characterization of its main components. Then, to evaluate performances of commercial instrumentation as available instrumentation is not designed for use in LLE. Lastly, to use the data for validation of the model developed with the system code RELAP5-3D. The data collected could prove helpful to analyze the behavior of the LLE loop of ITER and DEMO in accidental conditions.The results show that the regenerative countercurrent heat exchanger has an efficiency ranging from 70 to 85%, mainly depending on the LLE mass flow rate. It was verified that the air cooler has the capability to keep the cold part of the loop at 623. K, even in the most demanding situation (700. rpm and maximum temperature of the hot part). The instrumentation tested showed good accuracy, with the exception of the turbine flow meter. Nevertheless, specific limitations in the upper operative temperatures were found for the LLE direct contact pressure transducer. RELAP5-3D simulations fit very well the associated experimental results achieved

Experimental characterization of leak detection systems in HLM pool using LIFUS5/Mod3 facility

In the framework of the European Union MAXSIMA project, the safety of the steam generator (SG) adopted in the primary loop of the Heavy Liquid Metal Fast Reactor has been studied investigating the consequences and damage propagation of a SG tube rupture event and characterizing leak rates from typical cracks. Instrumentation able to promptly detect the presence of a crack in the SG tubes may be used to prevent its further propagation, which would lead to a full rupture of the tube. Application of the leak-before-break concept is relevant for improving the safety of a reactor system and decreasing the probability of a pipe break event. In this framework, a new experimental campaign (Test Series C) has been carried out in the LIFUS5/Mod3 facility, installed at ENEA Centro Ricerche Brasimone, in order to characterize and to correlate the leak rate through typical cracks occurring in the pressurized tubes with signals detected by proper transducers. Test C1.3_60 was executed injecting water at about 20 bars and 200°C into lead-bismuth eutectic alloy. The injection was performed through a laser microholed plate 60 μm in diameter. Analysis of the thermohydraulic data permitted characterization of the leakage through typical cracks that can occur in the pressurized tubes of the SG. Analysis of the data acquired by microphones and accelerometers highlighted that it is possible to correlate the signals to the leakage and the rate of release

SCWR ROD BUNDLE THERMAL ANALYSIS BY A CFD CODE

ABSTRACT The present paper describes the results of the application of the FLUENT code in the analysis of rod bundle configurations proposed for high pressure supercritical water reactors. The model considers a 1/8 slice of a rod bundle. The details from CFD calculations offer predictions of the circumferential clad surface temperature and of the effect of axial power distribution on the mass exchange between subchannels and on the maximum surface rod temperature. Geometry and boundary conditions are adopted from a previous work that made use of subchannel programs, allowing for a direct comparison between the two techniques. Both the standard k-ε model and the Reynolds stress transport model are used. Conclusions are drawn about the present capabilities in predicting heat transfer behavior in fuel rod bundles proposed for supercritical water reactors

Coupled system thermal Hydraulics/CFD models: General guidelines and applications to heavy liquid metals

This work aims to review the general guidelines to be adopted to perform coupled System Thermal Hydraulics (STH)/CFD calculations. The coupled analysis is often required when complex phenomena characterized by different characteristic time and length scales are investigated. Indeed, by STH/CFD coupling the main drawbacks of both stand-alone codes are overcome, reducing the computational cost and providing more realistic solutions. A review of several works available in literature and involving different coupling approaches, codes, time-advancing schemes and application fields is given. Besides STH/CFD coupling techniques, spatial domains and numerical schemes are analysed in detail. A brief description of applications to heavy liquid metal systems is also reported; lessons drawn in the frame of these and other works are then considered in order to develop a set of good practice guidelines for coupled STH/CFD applications

RELAP5/SIMMER-III code coupling development for PbLi-water interaction

A major safety issue in the Water-Cooled Lead-Lithium Breeding Blanket (WCLL-BB) system foreseen for fusion reactor is the interaction concerning the primary coolant (water) and the neutron multiplier (PbLi), due to a hypothetical tube rupture in the coolant circuit. This scenario involves an exothermic chemical reaction between PbLi and water with the production of hydrogen, in addition to critical interactions in a complex multiphase system in non-thermal equilibrium. In recent years the PbLi/water reaction was successfully implemented in the SIMMER-III code and validated against data from the LIFUS5/Mod3 experimental campaign. However, due to limitations of SIMMER-III, this work was restricted to the prediction of the phenomena inside the vessel, neglecting the simulation of the injection line. Nevertheless, since the injection line may actually have an important effect on the development of the transient, the simulation of the whole facility would be highly desirable. Indeed, the University of Pisa recently developed a coupling methodology between the SIMMER-III and RELAP5/Mod3.3 codes and applied it to simple single-phase cases. In this paper the complete simulation of the LIFUS5/Mod3 facility is presented, with the injection line modelled through RELAP5. Furthermore, all the complex aspects of the phenomena inside the reaction tank were included: the multiphase system and the interaction between water and PbLi with the chemical reaction and the production of hydrogen were modelled by SIMMER. Preliminary results are presented, showing that the coupling methodology can be effectively employed for the prediction of the chemical and thermal-hydraulic behaviour of complex loop experimental facilities