87 research outputs found
Grain growth during annealing of cryogenically-rolled Cu-30Zn brass
The grain-growth behavior of cryogenically-rolled Cu-30Zn brass during isothermal annealing at 900 °C was examined. The observed microstructure coarsening was interpreted in terms of normal grain growth with a grain-growth exponent of ∼4. The relatively slow grain-growth kinetics was attributed to the formation of precipitates at the grain boundaries and the interaction of texture and grain growth. The development of a moderate-strength {110} α fiber texture (∼4 times random) as well as the presence of a limited number of twin variants within the grains suggested the occurrence of variant selection during annealing
Microstructure response of cryogenically-rolled Cu-30Zn brass to electric-current pulsing
The effect of transient electric-current pulses (ECP) on the evolution of microstructure and texture of cryogenically-rolled Cu-30Zn brass was determined. The pulsing was shown to lead to recrystallization followed by grain growth. The mean grain size in the recrystallized material was 0.5 μm, thus indicating that cryogenic rolling coupled with ECP is suitable for the production of an ultrafine-grain microstructure in Cu-30Zn brass. The differences in the recrystallization texture in pulsed versus statically-annealed conditions suggested a distinct recrystallization mechanism during ECP
EBSD study of superplastically strained Al-Mg-Li alloy
In this study, electron back scatter diffraction (EBSD) was employed to examine the microstructure evolved during superplastic deformation of advanced Al-Mg-Li alloy. In contrast to the widelyaccepted conception of superplasticity, the microstructure was found to be characterized by elongated grains, a notable fraction of low-angle boundaries, and a distinct (though a very weak) crystallographic texture. All these observations suggested a significant activity of intragranular sli
EBSD study of superplasticity: New insight into a well-known phenomenon
Electron backscatter diffraction (EBSD) was applied to investigate the superplastic behavior of a fine-grain Al-Mg-Li alloy. It was found that microstructural changes were noticeably influenced by the occurrence of continuous dynamic recrystallization. This mechanism involved a transverse subdivision of pre-elongated grains which eventually transformed into chains of nearly-equiaxed grain
EBSD study of superplastically strained Al-Mg-Li alloy
In this study, electron back scatter diffraction (EBSD) was employed to examine the microstructure evolved during superplastic deformation of advanced Al-Mg-Li alloy. In contrast to the widely-accepted conception of superplasticity, the microstructure was found to be characterized by elongated grains, a notable fraction of low-angle boundaries, and a distinct (though a very weak) crystallographic texture. All these observations suggested a significant activity of intragranular slip
An Investigation on the Deformation Heating in Billet and Die During Equal-Channel Angular Pressing and High-Pressure Torsion
EBSD characterization of cryogenically rolled type 321 austenitic stainless steel
Electron backscatter diffraction was applied to investigate microstructure evolution during cryogenic rolling of type 321 metastable austenitic stainless steel. As expected, rolling promoted deformation-induced martensitic transformation which developed preferentially in deformation bands. Because a large fraction of the imposed strain was accommodated by deformation banding, grain refinement in the parent austenite phase was minimal. The martensitic transformation was found to follow a general orientation relationship, {111}γ||{0001}ε||{110}α′ and 〈110〉γ||〈11-20〉ε||〈111〉α′, and was characterized by noticeable variant selection
Martensite-to-austenite reversion and recrystallization in cryogenically-rolled type 321 metastable austenitic steel
The annealing behavior of cryogenically-rolled type 321 metastable austenitic steel was established. Cryogenic deformation gave rise to martensitic transformation which developed preferentially within deformation bands. Subsequent annealing in the range of 600 C to 700 C resulted in reversion of the strain-induced martensite to austenite. At 800 C, the reversion was followed by static recrystallization. At relatively-low temperatures, the reversion was characterized by a very strong variant selection, which led to the restoration of the crystallographic orientation of the coarse parent austenite grains. An increase in the annealing temperature relaxed the variant-selection tendency and provided subsequent recrystallization thus leading to significant grain refinement. Nevertheless, a significant portion of the original coarse grains was found to be untransformed and therefore the fine-grain structure was fairly heterogeneous
On the multistage nature of deformation of the microcrystalline aluminum-lithium alloy 1420 under superplasticity conditions
Structure and mechanical properties of Al-Fe system-base microcrystalline alloys produced by powder metallurgy methods
- …