Thermal analysis of a pm sm using fea and lumped parameter modeling

Permanent magnet synchronous motors are often used in hybrid electric vehicles due to the high power density. Overheating in a PMSM motor can cause negative effects on the work of permanent magnets and a significant shortening of the life of the machine due to the phenomenon of the thermal ageing of insulation. Therefore, it is extremely important to know the exact temperature distribution in different parts of the electrical machine under various operating conditions. This paper presents a lumped parameter thermal model and FE model of a permanent magnet synchronous motor. A method for the homogenization of a stator winding is also described. In order to validate the accuracy of the calculation results, measurements on the physical model of the machine were carried out

Influence of a Winding Short-Circuit Fault on Demagnetization Risk and Local Magnetic Forces in V-Shaped Interior PMSM with Distributed and Concentrated Winding

This paper presents a comparison of 30/8 and 12/8 AC permanent magnet motors with distributed (DW) and concentrated winding (CW) designed for electric vehicle traction. Both prototypes are based on an interior permanent magnet (IPM) motor topology and contain V-shape magnets. The radial flux AC IPM motors were designed for an 80 kW propulsion system to achieve 125 N·m. Finite element models (FEM) used to design the geometry of IPM motors and the required useful parameters of electric motors are widely investigated. The accuracy of finite element models is verified and validated on the basis of test data. Numerical simulations of healthy and faulty operation states, and studies of winding faults based on the FEM offer a deeper understanding of the associated phenomena. Therefore, in this paper, a short-circuit fault in a stator winding was simulated to investigate the transient currents under an external load collapse, for all winding phases. These simulations were used to define other important machine parameters to improve mechanical reliability of the motors and to assess the potential risk of permanent magnet (PM) demagnetization. Furthermore, the analysis of local magnetic forces affecting the PMs in the rotor and their possible displacement in a short-circuit situation were performed, also taking into account the centrifugal force. Lastly, it is demonstrated that the choice of winding configuration has a significant impact on the uncontrolled displacement of magnets in the rotor

Forces in Axial Flux Magnetic Gears with Integer and Fractional Gear Ratios

This paper presents a comparison of two variants of an axial flux magnetic gear (AFMG), namely, with integer and fractional gear ratios. Based on calculations derived with the use of three-dimensional numerical models, the torque characteristics of the analyzed AFMGs are computed and verified on a physical model. The greatest emphasis is put on the detailed decomposition and analysis of local forces in modulator pole pieces (also used in the structural analysis) within the no-load and maximal load conditions. The authors also describe the unbalanced magnetic forces (UMF) in the axial and radial directions resulting from the construction of the considered AFMGs variants, and their possible effects in the context of the use of additive manufacturing (AM) in prototypes. The paper also proposes an effective method for limiting the axial strain by using the asymmetry of the air gaps, which slightly reduces the torque transmitted by AFMGs. Finally, a static strength analysis was presented that allows us to assess the effects of local forces in the form of modulator disc deformation for selected cases of air gap asymmetry

Forces in Axial Flux Magnetic Gears with Integer and Fractional Gear Ratios

This paper presents a comparison of two variants of an axial flux magnetic gear (AFMG), namely, with integer and fractional gear ratios. Based on calculations derived with the use of three-dimensional numerical models, the torque characteristics of the analyzed AFMGs are computed and verified on a physical model. The greatest emphasis is put on the detailed decomposition and analysis of local forces in modulator pole pieces (also used in the structural analysis) within the no-load and maximal load conditions. The authors also describe the unbalanced magnetic forces (UMF) in the axial and radial directions resulting from the construction of the considered AFMGs variants, and their possible effects in the context of the use of additive manufacturing (AM) in prototypes. The paper also proposes an effective method for limiting the axial strain by using the asymmetry of the air gaps, which slightly reduces the torque transmitted by AFMGs. Finally, a static strength analysis was presented that allows us to assess the effects of local forces in the form of modulator disc deformation for selected cases of air gap asymmetry