InFocus: A spatial coding technique to mitigate misfocus in near-field LoS beamforming

Phased arrays, commonly used in IEEE 802.11ad and 5G radios, are capable of focusing radio frequency signals in a specific direction or a spatial region. Beamforming achieves such directional or spatial concentration of signals and enables phased array-based radios to achieve high data rates. Designing beams for millimeter wave and terahertz communication using massive phased arrays, however, is challenging due to hardware constraints and the wide bandwidth in these systems. For example, beams which are optimal at the center frequency may perform poor in wideband communication systems where the radio frequencies differ substantially from the center frequency. The poor performance in such systems is due to differences in the optimal beamformers corresponding to distinct radio frequencies within the wide bandwidth. Such a mismatch leads to a misfocus effect in near-field systems and the beam squint effect in far-field systems. In this paper, we investigate the misfocus effect and propose InFocus, a low complexity technique to construct beams that are well suited for massive wideband phased arrays. The beams are constructed using a carefully designed frequency modulated waveform in the spatial dimension. InFocus mitigates beam misfocus and beam squint when applied to near-field and far-field systems.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Team Nitin Myer

Near-field focusing using phased arrays with dynamic polarization control

Phased arrays in near-field communication allow the transmitter to focus wireless signals in a small region around the receiver. Proper focusing is achieved by carefully tuning the phase shifts and the polarization of the signals transmitted from the phased array. In this paper, we study the impact of polarization on near-field focusing and investigate the use of dynamic polar-ization control (DPC) phased arrays in this context. Our studies indicate that the optimal polarization configuration for near-field focusing varies spatially across the antenna array. Such a spatial variation motivates the need for DPC phased arrays which allow independent polarization control across different antennas. We show using simulations that DPC phased arrays in the near-field achieve a higher received signal-to-noise ratio than conventional switched- or dual-polarization phased arrays.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Team Nitin MyersMicrowave Sensing, Signals & SystemsSignal Processing System

Physical Layer Defense against Eavesdropping Attacks on Low-Resolution Phased Arrays

Eavesdropping attacks are a severe threat to millimeter-wave (mmWave) networks that use low-resolution phased arrays. Although directional beamforming in mmWave phased arrays provides natural defense against eavesdropping, the use of low-resolution phase shifters induces energy leakage into unintended directions. This energy leakage can be exploited by the adversaries. In this paper, we propose a directional modulation (DM)-based defense against eavesdropping attacks on low-resolution phased arrays. Our defense technique applies random circulant shifts to the beamformer for every symbol transmission. By appropriately adjusting the phase of the transmitted symbol, the transmitter (TX) can maintain a high-quality link with the receiver while corrupting the symbols transmitted along unintended directions. We theoretically analyze the secrecy mutual information (SMI) achieved by the proposed defense mechanism and show that our defense induces artificial phase noise (APN) along unintended directions, which increases the SMI of the system. Finally, we numerically show the superiority of the proposed defense technique over the state-of-the-art defense techniques.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Team Nitin Myer

Adaptive and Fast Combined Waveform-Beamforming Design for MMWave Automotive Joint Communication-Radar

Millimeter-wave (mmWave) joint communication-radar (JCR) will enable high data rate communication and high-resolution radar sensing for applications such as autonomous driving. Prior JCR systems that are based on the mmWave communications hardware, however, suffer from a limited angular field-of-view and low estimation accuracy for radars due to the employed directional communication beam. In this paper, we propose an adaptive and fast combined waveform-beamforming design for the mmWave automotive JCR with a phased-array architecture that permits a trade-off between communication and radar performances. To rapidly estimate the mmWave automotive radar channel in the Doppler-angle domain with a wide field-of-view, our JCR design employs circulant shifts of the transmit beamformer to acquire radar channel measurements and uses two-dimensional compressed sensing (CS) in the space-time dimension. We optimize these circulant shifts to minimize the coherence of the CS matrix, under the space-time sampling constraints in our problem. We evaluate the JCR performance trade-offs using a normalized mean square error (MSE) metric for radar estimation and a distortion MSE metric for data communication, which is analogous to the distortion metric in the rate-distortion theory. Additionally, we develop a MSE-based weighted average optimization problem for the adaptive JCR combined waveform-beamforming design. Numerical results demonstrate that our proposed JCR design enables the estimation of short- and medium-range radar channels in the Doppler-angle domain with a low normalized MSE, at the expense of a small degradation in the communication distortion MSE. Team Nitin Myer

LiDAR-Based Occupancy Grid Map Estimation Exploiting Spatial Sparsity

The problem of estimating occupancy grids to support automotive driving applications using LiDAR sensor point clouds is considered. We formulate the problem as a sparse binary occupancy value reconstruction problem. Our proposed occupancy grid estimation method is based on pattern-coupled sparse Bayesian learning and exploits the inherent sparsity and spatial occupancy dependencies in LiDAR sensor measurements. The proposed method demonstrates enhanced detection capabilities compared to commonly used benchmark methods, as observed through testing on scenes from the nuScenes dataset.Signal Processing SystemsTeam Nitin Myer

Learning-aided joint time-frequency channel estimation for 5G new radio

In this paper, we propose a learning-aided signal processing solution for channel estimation in 5G new radio (NR). Channel estimation is an important algorithm for baseband modem design. In 5G NR, estimating the channel is challenging due to two reasons. First, the pilot signals are transmitted over a small fraction of the available time-frequency resources. Second, the real time nature of physical layer processing introduces a strict limitation on the computational complexity of channel estimation. To this end, we propose a channel estimation technique that integrates a small one hidden layer neural network between two linear minimum mean squared error (LMMSE) interpolation blocks. While the neural network leverages the advantages of offline data-driven learning, the LMMSE blocks exploit the second order online channel statistics along time and frequency dimensions. The training procedure tunes the weights of the neural network by back-propagating through the time domain LMMSE interpolation block. We derive bounds on the training loss with the proposed method and show that our approach can improve the channel estimate.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Team Nitin Myer

Structured Sensing Matrix Design for In-sector Compressed mmWave Channel Estimation

Fast millimeter wave (mmWave) channel estimation techniques based on compressed sensing (CS) suffer from low signal-to-noise ratio (SNR) in the channel measurements, due to the use of wide beams. To address this problem, we develop an in-sector CS-based mmWave channel estimation technique that focuses energy on a sector in the angle domain. Specifically, we construct a new class of structured CS matrices to estimate the channel within the sector of interest. To this end, we first determine an optimal sampling pattern when the number of measurements is equal to the sector dimension and then use its subsampled version in the sub-Nyquist regime. Our approach results in low aliasing artifacts in the sector of interest and better channel estimates than benchmark algorithms.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Team Nitin MyersSignal Processing SystemsTeam Sander WahlsTeam Michel Verhaege