Personal Utility Cart

This final design report will detail the entire engineering design process from conceptualization through manufacturing and testing. After introducing the topic and scope of the project this document presents all of the benchmarking and research performed in order to obtain as much information about similar current products and possible solutions. Next the objectives of the project are presented where the needs are transformed into engineering specifications that will guide the design of the product. Design developed is then presented with ideation, idea evaluation and selection, analysis, manufacturing considerations, and final design selection. The final design is then presented with each of its three subsystems, including supporting analysis, manufacturing and testing plans, bill of materials and cost as well as material selection, safety considerations, and maintenance plans. Following that is the management plan where team roles are outlines and project deadlines are presented. Product realization is next, which includes the manufacturing process that was taken for all components as well as description of changes between the planned and built design and recommendations for future manufacturing changes. Design verification follows with testing procedures and results and a final budget for the manufactured design. Next are conclusions that summarize what was done during the project and recommendations which outline what could have been done differently from a design or project standpoint to provide insight for future designs. References for all researched information are included in order cited throughout the document. Finally all appendices are included at the end of the document that were referenced throughout the report as well as other important information

Protective Coatings for the Graphite Facing in Calcium-Aluminothermal Processes

Results of pilot plant and full scale studies on the elaboration of high temperature protective coatings for graphite in the process of the reductive melting of niobium pentoxide and NbAl alloys production are presented. Graphite has found extensive application in high temperature processes due to its unique thermophysical properties. However, in these conditions it reacts very easily with air oxygen, liquid metals, oxides, and fluorides. As a result, porous graphite gets impregnated with liquid metal; besides, carbonization of melt and formation of a layer of metal carbides on graphite surface takes place. The layer of metal carbides has a low adhesion with graphite and a major part of them is transferred to the melt. The graphite facing of a furnace is quickly destructed. To avoid these harmful processes, special plasma sprayed protective coatings are used. In this work various coatings (Al2O3, Al2O3-CaO, ZrO2, NbC, Al2O3 + Nb, ZrO2 + Nb, NbC + Nb, Nb) were tested in pilot plant and industrial conditions. It was established that the best durability of the protective coating on graphite can be achieved in the case of its three-layer composition: Nb (0.07 mm) + NbC (0.4 mm) + Nb (0.3 mm). After industrial melting of 500-2000 kg ingots about 80% of this coating on the belt of the shaft furnace had preserved. Plasma sprayed protective coatings on the graphite facing extended its operation time, reduced the carbon content in the metal ingots to 0.02% (mass), and slag carbon content to 0.05-0.15% (mass).The financial support to V. G. from the Doctorate School of the Faculty of Chemical and Materials Technology of Tallinn University of Technology is gratefully acknowledged

The role of cancer nurses in cancer-related pain management in Europe

Cancer pain is a common symptom in patients with cancer and can largely affect their quality of life. Pain management is important to minimize the impact of pain on daily activities. Cancer nurses are significantly involved in all steps of pain management and contribute to the success of therapy through their knowledge and expertise. While they generally play an important role in the screening, assessment, diagnosis, treatment and follow-up of patients and their (pain) symptoms, this varies from country to country in Europe. An important aspect is their role in educating patients and their families about what pain is, what impact it can have, how it can be treated pharmacologically or non-pharmacologically and what effects or problems can occur during treatment. While there is a great discrepancy between education and training opportunities for cancer nurses in different European countries, there is a continued need for education and training in pain management. Cancer is increasingly becoming a chronic disease, and the management of pain in cancer survivors will be crucial to maintain an adequate quality of life. With this, the crucial role of cancer nurses is becoming even more important.info:eu-repo/semantics/publishedVersio

Reduction of Tantalum Pentoxide with Aluminium and Calcium: Thermodynamic Modelling and Scale Skilled Tests

High reactivity of powdered aluminium together with its relatively low price are the main reasons for the application of this metal as a reducing agent for the reduction of oxides and fluorides of rare and rare earth metals by the aluminothermal method. This technology is widely used in the production of master alloys for ferrous metallurgy. The "out-of-furnace" process (i.e. without external heat access) is the prevailing technology for metallic niobium production worldwide. However, aluminothermal reduction for industrial production of metallic tantalum has been limited because of the high required temperature, over 2800 °C. In this paper the results of simultaneous reduction of tantalum(V) and iron(III) oxides by calcium-aluminothermal "out-of-furnace" process are presented. Powdered aluminium and metallic calcium were used as reductants. The pickup of tantalum at smeltings with the mass of raw materials over 1 kg reached 94%. The metal was obtained in the form of compact ingot; separation of metallic and slag phases was excellent. Crushed melt underwent refining remelting in an electron beam furnace. For thermodynamic studies and optimization of the aluminothermal reduction processes of Ta2O5 and Fe2O3 in the temperature range of 1000-3000°C a licensed computer simulation program "HSC Chemistry 6.1, 2007", elaborated by the company Outotec Oy, was applied

Physical Activity and Incident Hypertension in African Americans: The Jackson Heart Study

There is limited empirical evidence to support the protective effects of physical activity in the prevention of hypertension among African Americans. The purpose of this study was to examine the association of physical activity with incident hypertension among African Americans. We studied 1311 participants without hypertension at baseline enrolled in the Jackson Heart Study, a community-based study of African Americans residing in Jackson, Mississippi. Overall physical activity, moderate–vigorous physical activity, and domain-specific physical activity (work, active living, household, and sport/exercise) were assessed by self-report during the baseline examination (2000–2004). Incident hypertension, assessed at examination 2 (2005–2008) and examination 3 (2009–2013), was defined as the first visit with systolic/diastolic blood pressure ≥140/90 mm Hg or self-reported antihypertensive medication use. Over a median follow-up of 8.0 years, there were 650 (49.6%) incident hypertension cases. The multivariable-adjusted hazard ratios (95% confidence interval) for incident hypertension comparing participants with intermediate and ideal versus poor levels of moderate–vigorous physical activity were 0.84 (0.67–1.05) and 0.76 (0.58–0.99), respectively (P trend=0.038). A graded, dose–response association was also present for sport/exercise-related physical activity (Quartiles 2, 3, and 4 versus Quartile 1: 0.92 [0.68–1.25], 0.87 [0.67–1.13], 0.75 [0.58–0.97], respectively; P trend=0.032). There were no statistically significant associations observed for overall physical activity, or work, active living, and household-related physical activities. In conclusion, the results of the current study suggest that regular moderate–vigorous physical activity or sport/exercise-related physical activity may reduce the risk of developing hypertension in African Americans

Effects of White Space in Learning via the Web

This study measured the effect of specific white space features on learning from instructional Web materials. The study also measured learners' beliefs regarding Web-based instruction. Prior research indicated that small changes in the handling of presentation elements can affect learning. Achievement results from this study indicated that in on-line materials, when content and overall structure are sound, minor differences regarding table borders and vertical spacing in text do not hinder learning. Beliefs regarding Web-based instruction and instructors who use it did not differ significantly between treatment groups. Implications of the study and cautions regarding generalizing from the results are discussed.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline

The Ki-67 and Repoman mitotic phosphatases assemble via an identical, yet novel mechanism

Ki-67 and RepoMan have key roles during mitotic exit. Previously (Booth et al, eLife, 2014), we showed that Ki-67 organizes the mitotic chromosome periphery and recruits protein phosphatase 1 (PP1) to chromatin at anaphase onset, in a similar manner as RepoMan. Here we show how Ki-67 and RepoMan form mitotic exit phosphatases by recruiting PP1, how they distinguish between distinct PP1 isoforms and how the assembly of these two holoenzymes are dynamically regulated by Aurora B kinase during mitosis. Unexpectedly, our data also reveal that Ki-67 and RepoMan bind PP1 using an identical, yet entirely novel mechanism, interacting with a PP1 pocket that is engaged only by these two PP1 regulators. These findings not only show how two distinct mitotic exit phosphatases are recruited to their substrates, but also provides immediate opportunities for the design of novel cancer therapeutics that selectively target the Ki-67:PP1 and RepoMan:PP1 holoenzymes

Johnston Press and the Crisis in Ireland's Local Newspaper Industry, 2005-2014

Reflecting international trends, Ireland’s local newspaper industry has suffered steep circulation and advertising revenue falls since the late-2000s, and has struggled to reshape traditional business models for the digital era. In harsh trading conditions, local titles are operating on reduced editorial resources and are weakened in their capacity to fulfil their traditional watchdog and informed-citizenry functions. Perhaps no company better encapsulates the industry’s recent difficulties than UK media group Johnston Press. In 2005, it paid more than €200m to acquire fourteen local titles in Ireland, but nine years later sold them for just €8.5m. The article draws on this case-study to consider wider issues related to the corporatisation of local news provision, the sustainability of local news industries in small media markets such as Ireland’s, and the increasing disconnect between local journalism’s commodity value and its public good value