An Overview of Serum Albumin Interactions with Biomedical Alloys

Understanding the interactions between biomedical alloys and body fluids is of importance for the successful and safe performance of implanted devices. Albumin, as the first protein that comes in contact with an implant surface, can determine the biocompatibility of biomedical alloys. The interaction of albumin with biomedical alloys is a complex process influenced by numerous factors. This literature overview aims at presenting the current understanding of the mechanisms of serum albumin (both Bovine Serum Albumin, BSA, and Human Serum Albumin, HSA) interactions with biomedical alloys, considering only those research works that present a mechanistic description of the involved phenomena. Widely used biomedical alloys, such as 316L steel, CoCrMo and Titanium alloys are specifically addressed in this overview. Considering the literature analysis, four albumin-related phenomena can be distinguished: adsorption, reduction, precipitation, and protein-metal binding. The experimental techniques used to understand and quantify those phenomena are described together with the studied parameters influencing them. The crucial effect of the electrochemical potential on those phenomena is highlighted. The effect of the albumin-related phenomena on corrosion behavior of biomedical materials also is discussed

Tribological and tribocorrosion behavior of nickel sliding against oxide ceramics

Nickel is widely used as a coating material in electroplating because of its good corrosion and wear resistance even at high temperature. Tribocorrosion has been identified as one of the main degradation mechanisms of nickel. This study evaluated the tribocorrosion behavior of pure nickel in citrate buffer solution (pH 4.5) under controlled mechanical, chemical and electrochemical conditions as well as wear of pure nickel in dry condition sliding against alumina or zirconia balls, respectively. The results showed that the wear of nickel was higher in passive domain due to wear accelerated corrosion compared to that in the cathodic domain. Surprisingly, both alumina and zirconia were worn by nickel in tribocorrosion condition under passive potentials as well as in dry condition. However, in the cathodic domain, negligible wear was observed on the alumina and zirconia balls. The formation of mixed nickel and aluminum/zirconium oxides was proposed as the wear mechanism of alumina and zirconia

Influence of Bovine Serum Albumin (BSA) on the Tribocorrosion Behaviour of a Low Carbon CoCrMo Alloy in Simulated Body Fluids

Tribocorrosion, as the interaction between mechanical wear and electrochemical corrosion, has been found to be the main problem causing the failure and limiting the lifetime of metal-on-metal artificial hip joints. Better understanding of the tribocorrosion mechanisms of CoCrMo alloys is needed in order to reduce the degradation of this alloy, especially in the presence of proteins as one of the organic components present in synovial fluid. In this study, tribocorrosion tests of a low carbon CoCrMo alloy in phosphate buffer solution (PBS) with and without bovine serum albumin (BSA) in two different concentrations at different applied potentials (passive and cathodic) were carried out. The results show that the effect of proteins on wear and friction was concentration and potential dependent. In the cathodic domain (absence of very thin passive film), wear was very low in all solutions and the friction was significantly reduced by the addition of BSA to PBS even at low BSA concentrations. However, in the passive domain, the friction and wear were found not to be affected when the BSA concentration was 0.5 g/L, while they were reduced when increasing the BSA concentration to 36 g/L. The tribocorrosion results were rationalized through an existing tribocorrosion model and the effect of BSA on wear and friction was explained by the consideration of physical factors such as changes in viscosity and double layer structure, because in the present results no tribofilm formation was observed

Modeling Current Transients in a Reciprocal Motion Tribocorrosion Experiment

Tribocorrosion of passivating metals is a dynamic phenomenon causing degradation of materials by a combination of mechanical wear and electrochemical dissolution. The mechanical action typically produces a local removal of particles, metal as well as oxides, resulting in an exposure of the metal surface and is followed by a repassivation process, of which the time-dependent current response is a direct measure. Kinetics for interface-limited film growth were used to find an analytical expression for the current transients, including the conductivity of the electrolyte as well as the contribution from the confined geometry within the mechanical contact. The solution gave a good experimental fit to a series of experiments with a range of electrolyte conductivities, and also to correlate well with values obtained using electrochemical impedance spectroscopy. Parameters from the rubbing experiment were used to calculate curves that compared well with passivation transients recorded on a bare metal surface for the same electrolyte series. The evaluation procedure made it possible to assess the relative resistance contributions from the growing passive film, the confined mechanical contact geometry, and the electrolyte