Novel nanoformulations and nanosensors for bioactive molecules of biomedical significance

This thesis demonstrates novel nanosensors and nanomaterials for the sensitive detection of bioactive molecules (antibody therapeutics and antibiotics) in complex biological matrices utilizing thiol chemistry for label-free SERS detection. In addition to biomedical analysis, formulation development of dry powder inhalers overcomes the issues of adverse effects associated with parenteral or oral route of drug administration. It is expected to accomplish the key requisites like aerosolization properties, physicochemical characteristics, biocompatibility, and biodegradation with minimal side effects. Therefore, this study provided a motivation to address current advancement of detection techniques and development of novel drug delivery systems for the bioactive molecules

Preconcentration and SERS-based determination of infliximab in blood by using a TNF-α-modified gold-coated copper oxide nanomaterial

Infliximab (INF) is a chimeric monoclonal immunoglobulin acting against tumor necrosis factor-alpha (TNF-α). The drug is used for the treatment of chronic autoimmune and inflammatory diseases. A target-specific nanomaterial is presented for the extraction of INF from human plasma along with a label-free surface enhanced Raman spectroscopy (SERS) method for its determination using a handheld device. A gold-coated copper oxide chip was functionalized with TNF-α and used to extract the drug from plasma. INF was recovered from the extractor by lowering the pH value to 2.5. The disulfide bond structure of the drug was then reduced and used for its oriented chemisorption onto a gold-coated copper oxide substrate for SERS measurements using the INF-specific band at 936 cm −1. The working range of the SERS method was between 10 −7 and 10 −14 M of reduced INF. The relative standard deviation (RSD), between three different measurements was 4.2% (intra-day) and 7.1% (inter-day). The quantification and detection limits of the assay (LOQ, LOD) were 0.01 pM and 1.4 fM respectively. The SERS detection was cross-validated against ELISA where 99% agreement was found between the two methods. [Figure not available: see fulltext.] </p

Impact of Leucine and Magnesium Stearate on the Physicochemical Properties and Aerosolization Behavior of Wet Milled Inhalable Ibuprofen Microparticles for Developing Dry Powder Inhaler Formulation

This study investigated the development and characterization of leucine and magnesium stearate (MgSt) embedded wet milled inhalable ibuprofen (IBF) dry powder inhaler (DPI) formulations. IBF microparticles were prepared by a wet milling homogenization process and were characterized by SEM, FTIR, DSC, XRD and TGA. Using a Twin-Stage Impinger (TSI), the in vitro aerosolization of the formulations with and without carrier lactose was studied at a flow rate of 60± 5 L/min and the IBF was determined using a validated HPLC method. The flow properties were determined by the Carr’s Index (CI), Hausner Ratio (HR) and Angle of Repose (AR) of the milled IBF with 4–6.25% leucine and leucine containing formulations showed higher flow property than those of formulations without leucine. The fine particle fraction (FPF) of IBF from the prepared formulations was significantly (p = 0.000278) higher (37.1 ± 3.8%) compared to the original drug (FPF 3.7 ± 0.9%) owing to the presence of leucine, which enhanced the aerosolization of the milled IBF particles. Using quantitative phase analysis, the XPRD data revealed the crystallinity and accurate weight percentages of the milled IBF in the formulations. FTIR revealed no changes of the structural integrity of the milled IBF in presence of leucine or MgSt. The presence of 2.5% MgSt in the selected formulations produced the highest solubility (252.8 ± 0.6 µg/mL) of IBF compared to that of unmilled IBF (147.4 ± 1.6 µg/mL). The drug dissolution from all formulations containing 4–6.25% leucine showed 12.2–18.6% drug release in 2.5 min; however, 100% IBF dissolution occurred in 2 h whereas around 50% original and dry milled IBF dissolved in 2 h. The results indicated the successful preparation of inhalable IBF microparticles by the wet milling method and the developed DPI formulations with enhanced aerosolization and solubility due to the presence of leucine may be considered as future IBF formulations for inhalation

Rapid Assay for the Therapeutic Drug Monitoring of Edoxaban

Edoxaban is a direct oral anticoagulant (DOAC) that has been recently indicated for the treatment of pulmonary embolism (PE) in SARS-CoV-2 infections. Due to its pharmacokinetic variability and a narrow therapeutic index, the safe administration of the drug requires its therapeutic drug monitoring (TDM) in patients receiving the treatment. In this work, we present a label-free method for the TDM of edoxaban by surface enhanced Raman spectroscopy (SERS). The new method utilises the thiol chemistry of the drug to chemisorb its molecules onto a highly sensitive SERS substrate. This leads to the formation of efficient hotspots and a strong signal enhancement of the drug Raman bands, thus negating the need for a Raman reporter for its SERS quantification. The standard samples were run with a concentration range of 1.4 × 10−4 M to 10−12 M using a mobile phase comprising of methanol/acetonitrile (85:15 v/v) at 291 nm followed by the good linearity of R2 = 0.997. The lowest limit of quantification (LOQ) by the SERS method was experimentally determined to be 10−12 M, whereas LOQ for HPLC-UV was 4.5 × 10−7 M, respectively. The new method was used directly and in a simple HPLC-SERS assembly to detect the drug in aqueous solutions and in spiked human blood plasma down to 1 pM. Therefore, the SERS method has strong potential for the rapid screening of the drug at pathology labs and points of care

Gold-Deposited Nickel Foam as Recyclable Plasmonic Sensor for Therapeutic Drug Monitoring in Blood by Surface-Enhanced Raman Spectroscopy

A sensitive and recyclable plasmonic nickel foam sensor has been developed for surface-enhanced Raman spectroscopy (SERS). A simple electrochemical method was used to deposit flower-shaped gold nanostructures onto nickel foam substrate. The high packing of the gold nanoflowers onto the nickel foam led to a high enhancement factor (EF) of 1.6 × 1011. The new SERS sensor was utilized for the direct determination of the broad-spectrum β-lactam carbapenem antibiotic meropenem in human blood plasma down to one pM. The sensor was also used in High Performance Liquid Chromatography (HPLC)-SERS assembly to provide fingerprint identification of meropenem in human blood plasma. Moreover, the SERS measurements were reproducible in aqueous solution and human blood plasma (RSD = 5.5%) and (RSD = 2.86%), respectively at 200 µg/mL (n = 3), and successfully recycled using a simple method, and hence, used for the repeated determination of the drug by SERS. Therefore, the new sensor has a strong potential to be applied for the therapeutic drug monitoring of meropenem at points of care and intensive care unit

Phytotherapeutics: The Emerging Role of Intestinal and Hepatocellular Transporters in Drug Interactions with Botanical Supplements

In herbalism, botanical supplements are commonly believed to be safe remedies, however, botanical supplements and dietary ingredients interact with transport and metabolic processes, affecting drug disposition. Although a large number of studies have described that botanical supplements interfere with drug metabolism, the mode of their interaction with drug transport processes is not well described. Such interactions may result in serious undesired effects and changed drug efficacy, therefore, some studies on interaction between botanical supplement ingredients and drug transporters such as P-gp and OATPs are described here, suggesting that the interaction between botanical supplements and the drug transporters is clinically significant

Robust Wet Milling Technique for Producing Micronized Ibuprofen Particles with Improved Solubility and Dissolution

This study investigated a systematic approach for producing ibuprofen (IBF) particles with leucine by wet milling. Using a high shear homogenizer, the particles size of the IBF was reduced. Prepared IBF microparticles were freeze-dried and characterized by using Mastersizer, SEM, DSC, XRD, ATR-FTIR, and TGA. The drug saturation solubility and in-vitro dissolution performance were carried out in phosphate buffer solution (PBS, pH 7.4) at 37°C temperature and IBF were determined using a validated HPLC method. The wet-milled method reduced the particle size from 71.3 to 1.7 μm. The minimum particle size of IBF was obtained in 0.05% Tween 80 solution homogenized at 17,000 rpm for 15 min. The saturated solubility (168.7 µg/mL) of the micronized IBF particles with leucine showed higher compared to that of the original IBF (147.4 µg/mL) in PBS solution. The prepared IBF particles containing 2.5–6.25% leucine showed significantly higher IBF release (100%) compared to that of original drug particles (55.9%) in 120 min. The excipient leucine played a major role in enhancing the solubility and dissolution profile of the prepared IBF particles probably by the formation of hydrogen bonding. The developed wet milling was an efficient and robust technique for reducing the particle size of IBF and could be a useful method for manufacturing drug particles with enhanced solubility and dissolution.</p

Development and characterization of Meropenem dry powder inhaler formulation for pulmonary drug delivery

Meropenem (MPN), a broad spectrum β-lactam antibiotic, has been increasingly used in the treatment of moderate to severe bacterial infections. However, due to its short plasma half-life and chemical instability in solution form, it has been challenging to use in the intravenous formulation. This study aims to develop and characterize MPN dry powder inhaler (DPI) formulation for pulmonary delivery. The inhalable MPN particles (1-5µm) were prepared by micronization. Lactose, L-leucine and magnesium stearate (MgSt) were used in the powder formulation as carriers and dispersibility enhancers. The formulations were characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman confocal microscopy, X-Ray powder diffraction analysis (PXRD), and differential scanning calorimetry (DSC) methods. The concentration of MPN was determined by using a validated HPLC method. The Fine Particle Fraction (FPF) of meropenem from powder mixtures was determined by a Twin Stage Impinger (TSI) at a flow rate of 60 L/min. The FPF of the original MPN was 1.91 % which was significantly increased to 37.5 % for the formulations with excipients. No physical interactions between the drug and the excipients observed. This study revealed the potential of a stable meropenem DPI formulation for pulmonary delivery

A comparative sorption study of Cr3+ and Cr6+ using mango peels: kinetic, equilibrium and thermodynamic

The present study investigates a comparative study of the sorption of Cr3+ and Cr6+ from water using an agricultural by-product; mango peels in batch system under the effect of initial metal ion concentrations, solution pH, temperature, sorbent dose and contact time. Characterization of the mango peels was done before and after sorption of Cr3+ and Cr6+ using scanning electron microscopy, surface area pore size analyzer and FTIR spectroscopy. The pH study revealed that that maximum removal of Cr3+ and Cr6+ was obtained at pH 5.0 and 7.0 respectively. Among various kinetic models, pseudo-2nd order well explained the data owing to the higher values of R2 and the nearness between the values of experimental and calculated sorption capacities. The isotherms study revealed that Freundlich is the suitable isotherm for explanation of the equilibrium data due to higher R2 values. The monolayer sorption capacity of mango peels was found to be 98.039 mg g-1 for Cr3+ and 66.666 mg g-1 for Cr6+. The spontaneity and exothermic nature of the sorption process of Cr3+ and Cr6+ using mango peels was reflected from thermodynamic study

FOXO Transcriptional Factors and Long-Term Living

Several pathologies such as neurodegeneration and cancer are associated with aging, which is affected by many genetic and environmental factors. Healthy aging conceives human longevity, possibly due to carrying the defensive genes. For instance, FOXO (forkhead box O) genes determine human longevity. FOXO transcription factors are involved in the regulation of longevity phenomenon via insulin and insulin-like growth factor signaling. Only one FOXO gene (FOXO DAF-16) exists in invertebrates, while four FOXO genes, that is, FOXO1, FOXO3, FOXO4, and FOXO6 are found in mammals. These four transcription factors are involved in the multiple cellular pathways, which regulate growth, stress resistance, metabolism, cellular differentiation, and apoptosis in mammals. However, the accurate mode of longevity by FOXO factors is unclear until now. This article describes briefly the existing knowledge that is related to the role of FOXO factors in human longevity