2 research outputs found
Additive Manufacturing Polyurethane Acrylate via Stereolithography for 3D Structure Polymer Electrolyte Application
Additive manufacturing (AM), also known as 3D-printing technology, is currently integrated in many fields as it possesses an attractive fabrication process. In this work, we deployed the 3D-print stereolithography (SLA) method to print polyurethane acrylate (PUA)-based gel polymer electrolyte (GPE). The printed PUA GPE was then characterized through several techniques, such as Fourier transform infrared (FTIR), electrochemical impedance spectroscopy (EIS), X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and scanning electron microscope (SEM). The printed GPE exhibited high ionic conductivity of 1.24 × 10−3 S cm−1 at low-lithium-salt content (10 wt.%) in ambient temperature and favorable thermal stability to about 300 °C. The FTIR results show that addition of LiClO4 to the polymer matrix caused a shift in carbonyl, ester and amide functional groups. In addition, FTIR deconvolution peaks of LiClO4 show 10 wt.% has the highest amount of free ions, in line with the highest conductivity achieved. Finally, the PUA GPE was printed into 3D complex structure to show SLA flexibility in designing an electrolyte, which could be a potential application in advanced battery fabrication
Recommended from our members
The study of degradation and mechanical properties of poly(lactic) acid (PLA) based 3D printed filament
Abstract
Additive manufacturing, commonly known as 3D printing technology, has become one of the mainstream processes in the manufacturing industry due to its advantages over conventional manufacturing, which have piqued the public’s interest. This study aims to focus on the influence of thermal conditions on crystallization towards mechanical properties of 3D printed poly(lactic) acid (PLA) degradation samples with 100% infill. As for the degradation profile, the highest weight loss recorded by the samples was 0.7%, observed in samples buried in soil with an abiotic medium for one month. The exposure of degraded samples to high temperature during drying affected their crystallinity, resulting in significant changes in strains, particularly between week 1 and week 2, where strains dropped significantly from 7.33% to 4.28%, respectively. In conclusion, it has been demonstrated that degradation for PLA material still can occur in an abiotic medium, albeit at a slower rate compared to a biotic medium due to the presence of additional microorganisms and bacteria. Besides, the post-heat treatment process on PLA degradation samples affects their crystalline structure, resulting in significant changes in mechanical properties, particularly especially strains. Therefore, it can be concluded that different materials exhibit distinct mechanical properties.</jats:p