Cu and Ni Co-Sputtered Heteroatomic Thin Film for Enhanced Nonenzymatic Glucose Detection

In this work, we report a wafer-scale and chemical-free fabrication of nickel (Ni) and copper (Cu) heteroatomic Cu–Ni thin films using RF magnetron sputtering technique for non-enzymatic glucose sensing application. The as-prepared wafer-scale Cu–Ni thin films exhibits excellent electrocatalytic activity toward glucose oxidation with a 1.86 μM detection limit in the range of 0.01 mM to 20 mM range. The Cu–Ni film shows 1.3- and 5.4-times higher glucose oxidation activity in comparison to the Cu and Ni electrodes, respectively. The improved electrocatalytic activity is attributed to the synergistic effect of the bimetallic catalyst and high density of grain boundaries. The Cu–Ni electrodes also possessed excellent anti-interference characteristics. These results indicate that Cu–Ni heteroatomic thin film can be a potential candidate for the development of non-enzymatic glucose biosensor because of its chemical free synthesis, excellent reproducibility, reusability, and long-term stability

Aligned multi-walled carbon nanotube-embodied hydrogel via low magnetic field: A strategy for engineering aligned injectable scaffolds

Injectable scaffolds are a promising strategy to restore and regenerate damaged and diseased tissues. They require minimally invasive procedure and allow the formation of an in-situ structure of any shape. However, the formation of 3D in-situ structure with aligned morphologies using a method which could be easily transferred to clinical settings remains a challenge. Herein, the rational design of an aligned injectable hydrogel-based scaffold via remote-induced alignment is reported. Carboxylated multi-walled carbon nanotubes (cMWCNT) are aligned into hydrogel via low magnetic field. The uniform dispersion and alignment of cMWCNT into the hydrogel are clearly demonstrated by small angle neutron scattering. The obtained aligned cMWCNT-embodied hydrogel is stable over 7 days at room temperature and as well at body temperature (i.e. 37 °C). As unique approach, the formation of MWCNT-hydrogel composite is investigated combining rheology with molecular dynamic and quantum mechanical calculations. The increase of MWCNT concentration into the hydrogel decreases the total energy promoting structural stabilization and increase of stiffness. The remote aligning of injectable hydrogel-based scaffold opens up horizons in the engineering of functional tissues which requires specific cell orientation.publishedVersio

Cu and Ni Co-sputtered heteroatomic thin film for enhanced nonenzymatic glucose detection

In this work, we report a wafer-scale and chemical-free fabrication of nickel (Ni) and copper (Cu) heteroatomic Cu–Ni thin films using RF magnetron sputtering technique for non-enzymatic glucose sensing application. The as-prepared wafer-scale Cu–Ni thin films exhibits excellent electrocatalytic activity toward glucose oxidation with a 1.86 μM detection limit in the range of 0.01 mM to 20 mM range. The Cu–Ni film shows 1.3- and 5.4-times higher glucose oxidation activity in comparison to the Cu and Ni electrodes, respectively. The improved electrocatalytic activity is attributed to the synergistic effect of the bimetallic catalyst and high density of grain boundaries. The Cu–Ni electrodes also possessed excellent anti-interference characteristics. These results indicate that Cu–Ni heteroatomic thin film can be a potential candidate for the development of non-enzymatic glucose biosensor because of its chemical free synthesis, excellent reproducibility, reusability, and long-term stability

Reduced metal nanocatalysts for selective electrochemical hydrogenation of biomass-derived 5-(hydroxymethyl)furfural to 2,5-bis(hydroxymethyl)furan in ambient conditions

Selective electrochemical hydrogenation (ECH) of biomass-derived unsaturated organic molecules has enormous potential for sustainable chemical production. However, an efficient catalyst is essential to perform an ECH reaction consisting of superior product selectivity and a higher conversion rate. Here, we examined the ECH performance of reduced metal nanostructures, i.e., reduced Ag (rAg) and reduced copper (rCu) prepared via electrochemical or thermal oxidation and electrochemical reduction process, respectively. Surface morphological analysis suggests the formation of nanocoral and entangled nanowire structure formation for rAg and rCu catalysts. rCu exhibits a slight enhancement in ECH reaction performance in comparison to the pristine Cu. However, the rAg exhibits more than two times higher ECH performance without compromising the selectivity for 5-(HydroxyMethyl) Furfural (HMF) to 2,5-bis(HydroxyMethyl)-Furan (BHMF) formation in comparison to the Ag film. Moreover, a similar ECH current density was recorded at a reduced working potential of 220 mV for rAg. This high performance of rAg is attributed to the formation of new catalytically active sites during the Ag oxidation and reduction processes. This study demonstrates that rAg can potentially be used for the ECH process with minimum energy consumption and a higher production rate

Aligned multi-walled carbon nanotube-embodied hydrogel via low magnetic field : A strategy for engineering aligned injectable scaffolds

Injectable scaffolds are a promising strategy to restore and regenerate damaged and diseased tissues. They require minimally invasive procedure and allow the formation of an in-situ structure of any shape. However, the formation of 3D in-situ structure with aligned morphologies using a method which could be easily transferred to clinical settings remains a challenge. Herein, the rational design of an aligned injectable hydrogel-based scaffold via remote-induced alignment is reported. Carboxylated multi-walled carbon nanotubes (cMWCNT) are aligned into hydrogel via low magnetic field. The uniform dispersion and alignment of cMWCNT into the hydrogel are clearly demonstrated by small angle neutron scattering. The obtained aligned cMWCNT-embodied hydrogel is stable over 7 days at room temperature and as well at body temperature (i.e. 37 °C). As unique approach, the formation of MWCNT-hydrogel composite is investigated combining rheology with molecular dynamic and quantum mechanical calculations. The increase of MWCNT concentration into the hydrogel decreases the total energy promoting structural stabilization and increase of stiffness. The remote aligning of injectable hydrogel-based scaffold opens up horizons in the engineering of functional tissues which requires specific cell orientation.publishedVersionPeer reviewe

Low Temperature Electrical Transport in 2D Layers of Graphene, Graphitic Carbon Nitride, Graphene Oxide and Boron-Nitrogen-Carbon

In this work, we have investigated temperature dependent electrical transport properties of carbon based two-dimensional (2D) nanomaterials. Various techniques were employed to synthesize the samples. For instance, high quality large area graphene and boron, nitrogen doped graphene (BNC) were grown using thermal catalytic chemical vapor deposition (CVD) method. Liquid phase exfoliation technique was utilized to exfoliate graphene and graphitic carbon nitride samples in isopropyl alcohol. Chemical reduction technique was used to reduce graphene oxide (rGO) by utilizing ascorbic acid (a green chemical) as a reducing agent. Detailed structural and morphology characterization of these samples was performed using state of the art microscopy as well as spectroscopic techniques (for example; Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), UV-Visible spectroscopy as well as Raman Spectroscopy). The low temperature (5 K\u3c T \u3c400 K) electrical transport properties of these materials show substantial difference from sample to sample studied. For instance, CVD grown graphene film has displayed metallic behavior over a wide range of temperature (5 K \u3c T \u3c300 K). At higher temperatures, resistivity followed linearly with the temperature (ρ(T) ~T). A power law dependence (ρ(T) ~ T4) observed at lower temperatures. Where as liquid phase exfoliated graphene and graphitic carbon nitride samples displayed nonmetallic nature: increasing resistance with decrease in temperature over a wide range (8 K \u3c T \u3c 270 K) of temperature. Electrical transport behavior in these samples was governed by two different Arrhenius behaviors in the studied temperature range. In the case of rGO and BNC layers, electrical conduction show two different transport mechanisms in two different temperature regimes. At higher temperatures, Arrhenius-like temperature dependence of resistance was observed indicating a band gap dominating transport behavior. At lower temperatures, Mott\u27s two dimensional-Variable Range Hopping (2D-VRH) behavior was observed

One-Pot Synthesis of Semiconducting Quantum Dots–Organic Linker–Carbon Nanotubes for Potential Applications in Bulk Heterojunction Solar Cells

Materials and composites with the ability to convert light into electricity are essential for a variety of applications, including solar cells. The development of materials and processes needed to boost the conversion efficiency of solar cell materials will play a key role in providing pathways for dependable light to electric energy conversion. Here, we show a simple, single-step technique to synthesize photoactive nanocomposites by coupling carbon nanotubes with semiconducting quantum dots using a molecular linker. We also discuss and demonstrate the potential application of nanocomposite for the fabrication of bulk heterojunction solar cells. Cadmium selenide (CdSe) quantum dots (QDs) were attached to multiwall carbon nanotubes (MWCNTs) using perylene-3, 4, 9, 10-tetracarboxylic-3, 4, 9, 10-dianhydride (PTCDA) as a molecular linker through a one-step synthetic route. Our investigations revealed that PTCDA tremendously boosts the density of QDs on MWCNT surfaces and leads to several interesting optical and electrical properties. Furthermore, the QD–PTCDA–MWCNTs nanocomposites displayed a semiconducting behavior, in sharp contrast to the metallic behavior of the MWCNTs. These studies indicate that, PTCDA interfaced between QDs and MWCNTs, acted as a molecular bridge which may facilitate the charge transfer between QDs and MWCNTs. We believe that the investigations presented here are important to discover simple synthetic routes for obtaining photoactive nanocomposites with several potential applications in the field of opto-electronics as well as energy conversion devices

Real-time monitoring of COVID-19 progress using magnetic sensing and machine learning

A breathing monitor that includes a contactless sensor that uses magneto-LC resonance technology is provided. The breathing monitor collects breathing data from a patient that indicates a breathing pattern of the patient. A model trained using machine learning using breathing patterns collected from patients known to have different stages of COVID-19 is used to process the collected breathing data and to determine whether the patient has COVID-19. The model further determines the stage of COVID-19. The breathing monitor can identify likely COVID-19 infections faster than existing tests and requires no contact between the patient and a medical professional, which is an improvement over existing COVID-19 detection technologies

Phase diagram and magnetocaloric effects in Ni50Mn 35(In1-xCrx)15 and (Mn 1-xCrx)NiGe1.05 alloys

The magnetocaloric and thermomagnetic properties of Ni50Mn 35(In1-xCrx)15 and (Mn 1-xCrx) NiGe1.05 systems for 0 ≤ x ≤ 0.105 and 0 ≤ x ≤ 0.1, respectively, have been studied by x-ray diffraction, differential scanning calorimetry, and magnetization measurements. Partial substitution of Cr for Mn in (Mn1-xCrx)NiGe 1.05 results in a first order magnetostructural transition from a hexagonal paramagnetic to an orthorhombic paramagnetic phase near TM ∼ 380 K (for x = 0.07). Partial substitution of Cr for In in Ni 50Mn35(In1-xCrx)15 shifts the magnetostructural transition to a higher temperature (T = TM ∼ 450 K) for x = 0.1. Large magnetic entropy changes of ΔS = -12 (J/(kgK)) and ΔS = -11 (J/(kgK)), both for a magnetic field change of 5 T, were observed in the vicinity of TM for (Mn1-xCr x)NiGe1.05 and Ni50Mn35(In 1-xCrx)15, respectively. © 2014 AIP Publishing LLC