Conventional and contemporary approaches of splinting traumatized teeth: A review article

Trauma moves a tooth from its original position which needs to be repositioned for optimum healing and better outcomes. To stabilize the traumatically displaced teeth, splinting is specified as the gold standard. In this article we have discussed about various old and modern techniques based on the type of material to splint teeth with dentoalveolar trauma. As per recommendation of IADT, providing flexible splint is beneficial for good healing. A biologically favourable splint should not just be user friendly but also should be convenient in terms of removal. Every technique has its merits and demerits. Iatrogenic trauma to the teeth due to forceful removal of material should be avoided as it may result in post-operative sensitivity but sometimes it is inevitable. Metallic or wire based splints either secured with ligature wire or resin based material may show directly or through the cemented material and compromise aesthetics. This worsens the physiological impact which the patient is already facing after trauma. Recent advancement in splinting material with fiber reinforced material has brought a dramatic change in terms of strength and aesthetics, specifically after traumatic dental injuries. There are various other techniques discussed here which can be used for splinting teeth when the dentist has limited time in emergency or limited resources. The type and timing of the splinting span should be in accordance with the type of injury and as per IADT recommendation to follow standard of care

A CBCT based evaluation of root proximity of maxillary posterior teeth to sinus floor in a subset of Pakistani population

Objective: To evaluate the vertical relationship of the roots of maxillary posterior teeth with maxillary sinus floor, and its association with age, gender and bilateral jaw symmetry.Methods: The cross-sectional study was conducted at a tertiary care hospital in Karachi from June to December 2018, and comprised patients who visited the dental clinics and underwent cone-beam computed tomography scans. The scans were evaluated in the axial, coronal and sagittal planes and roots were classified using Jungs classification for proximity to maxillary sinus floor. The distance between the sinus floor and the apices of maxillary posterior teeth was measured. Data was analysed using SPSS 23.Results: There were 60 scans with 1066 roots. The most common maxillary tooth root in Type III group of Jung classification was the mesio-buccal root of the 2nd molar with the shortest mean distance of 0.44±3.05mm, followed by palatal roots of the 1st molar with the shortest mean distance of 1.58±4.01mm. The maxillary tooth root most frequent in Type I group was buccal root of 1st premolar with a mean distance of 8.15±6.65mm, and the 2nd premolar with a mean distance of 7.38±6.60mm. No significant difference was found in terms of gender and sides (p ≥0.05).Conclusions: The most common tooth root protruding in the sinus was found to be the mesio-buccal root of the 2nd molar, followed by palatal roots of the 1st molar. The most distant maxillary tooth root from the sinus was the buccal root of 1st and 2nd premolars

Comparison of antimicrobial efficacy of calcipex and metapex in endodontic treatment of chronic apical periodontitis: A randomised controlled trial study protocol

Introduction: Various intracanal medicaments have been used in cases of chronic apical periodontitis for appropriate disinfection of the root canal system to eliminate microbes especially from the inaccessible areas. Calcium hydroxide is the most common intracanal medicament available in various forms, but its effectiveness with or without iodoform using microbial culture is unknown. Therefore, our aim is to compare the antimicrobial efficacy of Calcipex and Metapex in endodontic treatment of teeth presenting with chronic apical periodontitis by assessing the bacterial load reduction.Method and analysis: 60 single rooted teeth of patients with diagnosis of chronic apical periodontitis will be selected and the canals debrided chemomechanically. The patients will be randomised into two groups: Calcipex and Metapex. The first sample (S1) for bacterial culture will be taken before placement of intracanal medicament and the second sample (S2) will be taken after 7 days, before final obturation from the canal and sent to lab for culture. Colony-forming unit will be evaluated. Paired t-test will be used to assess difference between antimicrobial efficacies within the group of medicaments. Independent sample t-test will be used to assess antimicrobial efficacies between groups. Level of significance will be kept at 0.05.Ethics and dissemination: Approval from Aga Khan University Hospital Ethical review committee is taken. Findings will be reported according to the Standard Protocol Items for Randomised Trials guidelines. Research findings will be disseminated through annual reports, peer-reviewed journals and conferences.Trial registration number: NCT04336709

Knowledge and awareness regarding uses of extracted natural tooth in clinical practice

Restoration of aesthetics is one the major patients’ concern in dentistry which may be disrupted due to tooth-loss secondary to trauma, or as part of orthodontic treatment or periodontal problem. A number of treatment options are available for the replacement of teeth, but they may be expensive, and time-consuming, involving artificial teeth. For immediate tooth replacement, patient’s own intentionally extracted or unintentionally avulsed tooth maybe used. The current narrative review was planned to discuss various techniques for the use of natural tooth pontic, which preserves the original contours, size and colour of the replaced tooth. Before using these teeth in a prosthesis, they need to be thoroughly disinfected and stored in appropriate medium according to the global guidelines. This reversible option would boost patient’s confidence, preserve natural tooth anatomy and improve patient’s acceptanc

Comparison of surface defects in Protaper Next and Hyflex EDM files after single clinical use: A stereoscopic evaluation

Objective: To compare the surface defects created on the ProTaper Next files versus HyFlex Electrical Discharge Machining files after single clinical use in molars.Methods: The cross-sectional study was conducted in the dental department of the Aga Khan University Hospital, Karachi, from December 2018 to June 2019, and comprised Nickel-Titanium files belonging to HyFlex Electrical Discharge Machining and ProTaper Next to perform complete root canal treatment of molar teeth. The files were first visually examined and then analysed under 25.6x magnification using a stereomicroscope for the evaluation of surface defects. A photographic record was maintained and studied. Data was analysed using SPSS 23.0.Results: Of the 114 files, 38(33.3%) each were ProTaper Next X1, ProTaper Next X2 and HyFlex Electrical Discharge Machining. The number of files showing defects under microscopic evaluation were 17(14.9%). Deformation of the cutting edge was the most frequently seen defect type, found in 9(7.9%) files. The frequency of fractured files was 4(3.5%). The odds of microscopic defects in HyFlex Electrical Discharge Machining files was 2.64 times that of ProTaper Next files.Conclusion: Even after single clinical use, HyFlex Electrical Discharge Machining files were more likely to get microscopic defects on their surface compared to ProTaper files

Comparison of two different methods in the removal of oil-based calcium hydroxide from root canal system: A triple-blinded randomised clinical trial

Objective: To compare the effectiveness of rotary master apical file (RMAF) with ultrasonic activation of endodontic file (UAF) in the removal of silicon oil-based calcium hydroxide (SOBCH) from the canal.Methods: Ethical review committee approval and informed consent was obtained. 60 cases with necrotic teeth in which silicon oil-based intracanal medicament (Metapex) was to be placed were randomised in one of the two groups using sealed envelopes containing assignment codes for medicament removal: RMAF and UAF group. After standard protocol of coronal access, cleaning and shaping, silicon oil-based SOBCH was placed using a Lentulo spiral. A periapical radiograph was taken after SOBCH placement to check for adequate adaptation. On 7th day, after instrumentation and medicament removal according to respective group, a second radiograph was taken to evaluate the effectiveness. Effectiveness was calculated using a graded scale in which 0 and 1 are effective and 2 and 3 are ineffective cleaning. Teeth were statistically analyzed using the Mann Whitney U and Chi-square test.Results: There was no statistically significant difference in the removal effectiveness of group RMAF and Group UAF at coronal (P=0.74) middle (P=0.71) and apical third (P=0.68). According to the graded score both techniques were equally effective in cleaning at all thirds of canal (RMAF=Apical: 1.09+-0.70, Middle: 0.61+-0.80, Coronal: 0.33+-0.48 and UAC=Apical: 1.00+-0.77, Middle: 0.52+-0.74, Coronal: 0.28+-0.46). Effectiveness of SOBCH removal using the two methods was not statistically significant between maxillary and mandibular teeth (P=0.35).Conclusion: Both the removal methods, Ultrasonic activation of file and Rotary master apical file, for SOBCH were equally effective in all the thirds of canal. And none of the techniques were able to completely remove the SOBCH. Effectiveness of SOBCH removal using the two methods was not statistically different between maxillary and mandibular teeth. (EEJ-2020-07-183)

Cone Beam Computed Tomography based evaluation of position of mental foramen and its relation to apices of mandibular posterior teeth in a sample of Pakistani population

Objective: To radiographically determine the mental foramen position, its distance to the nearest apex and the prevalence of anterior loop of mandibular nerve using cone-beam computed tomography scans. Method: The cross-sectional study was conducted at the Aga Khan University Hospital, Karachi, from January to June 2020, and comprised cone-beam computed tomography scans of males or females of Pakistani origin aged 15-65 years with intact mandibular dentition and fully formed roots with matured apex. The scans were analysed to determine the horizontal position of mental foramen and to classify it according to the Tebo and Telford classification. The vertical distance from mental foramen to the nearest tooth apex was measured and the mandibular nerve configuration was determined. Data was analysed using SPSS 23. Results: Among the 96 scans, the most frequent location of mental foramen MF was along the long axis of 2nd premolars for both right 50(52.1%) and left 49(51%) sides, followed by between 1st and 2nd premolars for both right 28(29.2%) and left 38(39.6%) sides. The mean minimum distance from mental foramen to the nearest root apex was 3.75±2.59mm and 3.99±2.26mm on right and left sides, respectively. There was bilateral symmetry on both sides. The most frequent mandibular nerve configuration on the right 69(72.6%) and left 75(78.1%) sides, with anterior loop being the least common; right side 3(3.2%) and 5(5.2%) left side. Conclusion: The most common position of mental foramen was along the long axis of 2nd premolars while the anterior loop was the least common. Key Words: CBCT, Mental foramen, Mandibular teeth, Pakistani population, Tebo and Telford classification, Mandibular nerve

Surgical and prosthodontics management of a perforating giant radicular cyst in anterior maxilla: a case report

Abstract Radicular cyst is the most common type of odontogenic cyst associated with the apex of non-vital teeth. The lining of the radicular cyst usually arises from the epithelial rests of Malassez. These cyst usually persists even after the elimination of microbial load from the root canals. Surgical removal is deemed necessary for the management. For larger lesions extending to the facial or palatal cortical plates, additional regenerative procedures such as bone grafting along with collagen membrane are warranted. This case report describes the surgical and prosthetic management of a giant radicular cyst that was perforating the cortical plates in the anterior maxilla. Key words: cysts, radicular cyst; bone grafting, esthetic management, regeneration

Comparison of surface defects in Protaper Next and Hyflex EDM files after single clinical use – A stereoscopic evaluation

Objective: To compare the surface defects created on the ProTaper Next files versus Hyflex EDM files after single clinical use in molars. Methods: One hundred and fourteen Nickel-Titanium files belonging to two contemporary systems, HyFlex EDM and ProTaper Next, were used to perform complete root canal treatment of a molar tooth. The files were first visually examined and then analyzed under 25.6x magnification using a stereomicroscope for evaluation of surface defects. A photographic record was maintained and studied. Descriptive statistics were calculated for frequency of defects. Chi-square test was used to check the association between file and defect type. Odd’s ratio was calculated to check the strength of association between file type and microscopic presence of defects. Results: Frequency of files showing defects was 14.9%. Deformation of the cutting edge was the most frequently seen defect type, found in 7.9% files. The frequency of fractured files was 3.5%. The odds of microscopic defects in HyFlex EDM is 2.64 times that of ProTaper Next. Conclusion: Even after single clinical use, HyFlex EDM files are more likely to get microscopic defects on their surface compared to ProTaper files. Continuous..