Comparative study: the effect of annealing conditions on the properties of P3HT:PCBM blends

This paper presents a detailed study on the role of various annealing treatments on organic poly(3-hexylthiophene) and [6]-phenyl-C61-butyric acid methyl ester blends under different experimental conditions. A combination of analytical tools is used to study the alteration of the phase separation, structure and photovoltaic properties of the P3HT:PCBM blend during the annealing process. Results showed that the thermal annealing yields PCBM ‘‘needle-like’’ crystals and that prolonged heat treatment leads to extensive phase separation, as demonstrated by the growth in the size and quantity of PCBM crystals. The substrate annealing method demonstrated an optimal morphology by eradicating and suppressing the formation of fullerene clusters across the film, resulting in longer P3HT fibrils with smaller diameter. Improved optical constants, PL quenching and a decrease in the P3HT optical bad-gap were demonstrated for the substrate annealed films due to the limited diffusion of the PCBM molecules. An effective strategy for determining an optimized morphology through substrate annealing treatment is therefore revealed for improved device efficiency.Web of Scienc

Self-Catalytic Growth of Tin Oxide Nanowires by Chemical Vapor Deposition Process

We report on the synthesis of tin oxide (SnO 2 ) nanowires by a chemical vapor deposition (CVD) process. Commercially bought SnO nanopowders were vaporized at 1050 ∘ C for 30 minutes with argon gas continuously passing through the system. The assynthesized products were characterized using UV-visible absorption spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM). The band gap of the nanowires determined from UV-visible absorption was around 3.7 eV. The SEM micrographs revealed "wool-like" structure which contains nanoribbons and nanowires with liquid droplets at the tips. Nanowires typically have diameter in the range of 50-200 nm and length 10-100 m. These nanowires followed the vapor-liquid-solid (VLS) growth mechanism

Grain structure orientational change in Ti6Al4V alloys induced by sea water quenching and novel stress relief annealing process

We report on the microstructures and properties of Ti6Al4V alloys, which were achieved upon quenching in sea water medium with potential high cooling rate. The Ti6Al4V alloys were quenched at 1000 and 1100 ◦C, respectively. Moreover, the effect of post-quenching annealing performed at 900 ◦C was analyzed. As a result, the quenched alloy experienced surface thermal stress, due to rapid cooling and thermal shock, due to exposure to high temperature annealing

Green Synthesis of CuO-TiO₂ Nanoparticles for the Degradation of Organic Pollutants: Physical, Optical and Electrochemical Properties

CuO-TiO2 nanocomposites were successfully synthesized using the C. benghalensis plant extracts. The effect of the composition of CuO to TiO2 on the morphological, optical, electrochemical, and photodegradation efficiency in the composites was studied. SEM, XRD, UV-vis, FTIR, TGA, BET, and CV were used to characterize these materials. The XRD data reported the tenorite structure of the CuO and the anatase phase of the TiO2. SEM showed the spherical morphologies for all the CuO-TiO2 NPs, and these were also mesoporous in nature, as depicted by BET. The voltammogram of the CuO-TiO2 30/70 electrode showed a higher response current density compared to the other two samples, suggesting a higher specific capacitance. Upon testing the photocatalytic efficiencies of the CuO-TiO2 nanocomposites against methylene blue (MB), ciprofloxacin (CIP), and sulfisoxazole (SSX), the highest degradation of 94% was recorded for SSX using the CuO-TiO2 30/70 nanocomposites. Hydroxyl radicals were the primary species responsible for the photodegradation of SSX, and the material could be reused once. The most active species in the photodegradation of SSX has been identified as OH•. From this study, it can be noted that the CuO-TiO2 nanocomposites were more selective toward the degradation of antibiotics (sulfisoxazole and ciproflaxin) as compared to dyes (methylene blue)