13 research outputs found

    Морфология поднутрений нижней челюсти с язычной стороны

    No full text
    The aim of the study is the literature review on assessment of lingual concavities in posterior mandibula with CBCT to prevent complications such as perforations during dental implant placement. Methods. The electronic search of full-text articles on lingual concavity studies with CBCT was performed. The data on the prevalence, depth and angle of concavities was analyzed. Results. The analysis included 5 articles from 2011 to 2016 years. Totally 1713 mandibular concavities were evaluated in 1232 patients. The prevalence was 46.7-68%; mean depth was from 2.4 mm to 5.4 mm; and the mean angle varied from 143 to 156.6 degrees. Conclusion. Though morphologic data of lingual concavities showed similar pattern it is necessary to provide CBCT evaluation prior to dental implant placement to define available bone and its morphology. It is recommended to use guided surgery if U-type is evident.Цель исследования - обзор литературы о параметрах язычных поднутрений в боковом отделе нижней челюсти на основе конусно-лучевой компьютерной томографии (КЛКТ) для предотвращения осложнения в виде перфорации во время проведения дентальной имплантации. Материал и методы. Проведен электронный поиск полнотекстовых статей об исследованиях язычных поднутрений с помощью КЛКТ. Анализировались их распространенность, глубина и угол. Результаты. Из 89 представленных публикаций было отобрано 5 исследований, выполненных с помощью КЛКТ с 2011 по 2016 г. Всего обследовано 1713 зон поднутрений у 1232 пациентов. Распространенность язычных поднутрений составила 46,7-68%. Средняя глубина поднутрений варьировала от 2,4 до 5,4 мм, угол - от 143 до 156,6°. Вывод. Несмотря на то что морфологические показатели язычных поднутрений находятся в одном диапазоне, необходимо проводить КЛКТ-обследование для оценки количества и морфологии доступной костной ткани. При выраженности данного образования (U-тип) рекомендуется применение навигационной хирургии в виде использования хирургического шаблона

    Morphology of mandibular lingual concavities [Morfologiia podnutreniĭ nizhneĭ cheliusti s iazychnoĭ storony]

    No full text
    AIM: The literature review on assessment of lingual concavities in posterior mandibula with CBCT to prevent complications such as perforations during dental implant placement. METHODS: The electronic search of full-text articles on lingual concavity studies with CBCT was performed. The data on the prevalence, depth and angle of concavities was analyzed. RESULTS: The analysis included 5 articles from 2011 to 2016 years. Totally 1713 mandibular concavities were evaluated in 1232 patients. The prevalence was 46.7-68%; mean depth was from 2.4 mm to 5.4 mm; and the mean angle varied from 143 to 156.6 degrees. CONCLUSION: Though morphologic data of lingual concavities showed similar pattern it is necessary to provide CBCT evaluation prior to dental implant placement to define available bone and its morphology. It is recommended to use guided surgery if U-type is evident.Цель исследования - обзор литературы о параметрах язычных поднутрений в боковом отделе нижней челюсти на основе конусно-лучевой компьютерной томографии (КЛКТ) для предотвращения осложнения в виде перфорации во время проведения дентальной имплантации. Материал и методы. Проведен электронный поиск полнотекстовых статей об исследованиях язычных поднутрений с помощью КЛКТ. Анализировались их распространенность, глубина и угол. Результаты. Из 89 представленных публикаций было отобрано 5 исследований, выполненных с помощью КЛКТ с 2011 по 2016 г. Всего обследовано 1713 зон поднутрений у 1232 пациентов. Распространенность язычных поднутрений составила 46,7-68%. Средняя глубина поднутрений варьировала от 2,4 до 5,4 мм, угол - от 143 до 156,6°. Вывод. Несмотря на то что морфологические показатели язычных поднутрений находятся в одном диапазоне, необходимо проводить КЛКТ-обследование для оценки количества и морфологии доступной костной ткани. При выраженности данного образования (U-тип) рекомендуется применение навигационной хирургии в виде использования хирургического шаблона

    Анализ литературы рандомизированных исследований о возможностях стоматологических вмешательств у больных при терапии бисфосфонатами и рисками развития остеонекроза нижней челюсти

    No full text
    Summary We conducted a systematic analysis of periodic literature on surgical dental procedures in patients taking bisphosphonates therapy for the treatment of osteoporosis or cancer, with an assessment of the risk of jaw necrosis. Currently, bisphosphonates are used for the treatment of cancer and severe forms of osteoporosis. Bisphosphonate osteonecrosis can occur spontaneously or as a consequence of various surgical procedures (tooth extraction, resection, implantation, etc.). The study included 16 publications for the period 2002-2016 years; only papers with the groups ≥ 50 patients were considered. We analyzed the incidence of bisphosphonate necrosis of the jaws after dental surgical treatment with intravenous and oral administration of bisphosphonates, as well as the incidence of necrosis in patients with various techniques of management after dental intervention. The analysis of the articles did not show a consensus on biphosphonate treatment of patients with surgical dental interventions and emphasized the need to continue research in this area.Резюме Выполнен анализ литературы о проведении хирургических стоматологических вмешательств пациентам, принимающим терапию бисфосфонатами по поводу лечения остеопороза или онкологических заболеваний, с оценкой риска возникновения некроза челюсти. В настоящее время использование бисфосфонатов применяется как в качестве лекарственной терапии для лечения онкологических заболеваний, так и при лечении тяжелой формы остеопороза. Бисфосфонатный остеонекроз может возникнуть спонтанно 88 или при различных хирургических вмешательствах (удаление зубов, резекция, имплантация и прочее). В исследование было включено 16 публикаций за период 2002 - 2016 гг.; критерий включения: размер группы пациентов ≥ 50человек. Проведено сравнение частоты возникновения бисфосфонатного некроза челюстей вследствие оказания стоматологического хирургического лечения. Изучалась частота возникновения некрозов при внутривенном и пероральном приеме бисфосфонатов, а также встречаемость некрозов при различных техниках ведения пациентов после стоматологического вмешательства. Анализ статей не показал единого мнения и плана лечения пациентов, что свидетельствует о необходимости продолжения исследований по данной теме

    АНАЛИЗ ЖЕСТКОСТИ ВОДЫ В ОКРУГАХ ГОРОДА МОСКВЫ И ВЛИЯНИЕ НА СТЕПЕНЬ МИНЕРАЛИЗАЦИИ ЗУБНЫХ ОТЛОЖЕНИЙ

    No full text
    This publication describes the relationship between water hardness and the intensity and degree of mineralization of dental deposits, the frequency of visits to a dentist for the purpose of professional hygiene and elimination of the primary signs of inflammation of periodontal tissues. The frequency of access to a dentist for the purpose of professional hygiene varies in different parts of Moscow. Water hardness is not the same in all administrative districts of Moscow and is due to the presence of decentralized sources of water supply. The relationship between the level of hardness and the intensity of mineralization of dental deposits coincide with the complaints of patients and indicators of the quality of drinking water.В настоящей публикации описана связь жесткости воды и интенсивности и степени минерализации назубных отложений, частота обращения к врачу-стоматологу с целью проведения профессиональной гигиены и устранения первичных признаков воспаления тканей пародонта. Частота обращения к врачу-стоматологу с целью проведения профессиональной гигиены варьируется в разных районах Москвы. Жесткость воды не во всех административных районах Москвы одинаковая и обусловлена наличием децентрализованных источников водоснабжения. Связь между уровнем жесткости и интенсивностью минерализации зубных отложений совпадают с жалобами пациентов и показателями качества питьевой воды

    Visualization features of canalis sinuosus with cone beam computed tomography

    No full text
    Introduction: One of the key stages of evaluating an edentulous ridge prior to dental implant placement is the analysis of neighboring anatomical structures such as canalis sinuosus (CS) with cone-beam computed tomography (CBCT). CBCT visualization has its own features, such as the change of slice thickness. The aim of the study was to analyze CS prevalence in relation to the slice thickness and CS diameter according to CBCT scans. Materials and Methods: In total, 100 CBCT scans of 39 males and 61 females in the age span of 46 to 81 years were retrospectively studied. Terminal alveolar part of CS was analyzed in Ez3D2009 (Vatech) software on panoramic and cross-sectional views with 0.5 mm, 1 mm, 3 mm, and 10 mm slice thicknesses. The prevalence was documented with regard to the diameter and slice thickness and was statistically compared in age and gender groups. Results: This CBCT study demonstrated 55.5% CS prevalence. There was no statistically significant difference in presence between age and gender groups regarding diameter as well as within different slice thickness. The study also showed the importance of the slice thickness choice for CS visualization: the best visualization was reached with 0.5 mm and 1 mm slice thicknesses. Visualization with 0.5 mm and 1 mm slice thicknesses was absolutely the same (55.5%). General CS prevalence with a 10 mm slice thickness (16.5%) was significantly lower (P < 0.05) than the prevalence with a 3 mm slice thickness (20.5%). The correlation between the slice thickness and a diameter more than 1.5 mm in size was not found. Conclusion: CBCT analysis showed that the highest CS prevalence was detected with the use of 0.5/1 mm slice thickness. As well, the higher CS diameter, the better is its visualization. © 2019 Indian Journal of Dental Research Published by Wolters Kluwer - Medknow

    COMPARATIVE ANALYSIS OF SMEAR LAYER REMOVAL TECHNIQUES IN THE TREATMENT OF DENTAL CARIES

    No full text
    The purpose of this systematic literature analysis is to review the application features of various types of acids and to determine the most effective etching technique to achieve maximum elimination of the smear layer. Materials and methods: the analysis of up-to-date Russian and English literature was carried out in Google Scholar and PubMed electronic databases. The analysis identified the features of various etching techniques using phosphoric, maleic and polyacrylic acids to achieve maximum elimination of the smear layer. Results: during the analysis, 67 articles were examined. After analyzing the literature on the inclusion criteria, the total number of publications amounted 31. Conclusion: smear layer should be removed using phosphoric or maleic acids according types of tissues: phosphoric acid application used on the enamel, maleic acid is applied on the dentine due to ensure a high-quality adhesive protocol, taking into account the sparing effect on the structural and functional units of tissues. Recommended exposure: applied to the enamel for 15-30 seconds, taking into consideration the type and the molecular weight of the acid. The exposure time of acid on dentin is recommended from 10-15 seconds, but an increase in the exposure time of maleic acid on dentin did not lead to negative changes in the structure of dentin, which significantly distinguishes the use of orthophosphoric acid. Also, static batching is not enough for high-quality treatment, because, in case of static etching, only the internal areas consisting of enamel prisms can be fully etched. Consequently, the use of dynamic etching is recommended. All authors contributed equally to the writing of the article. © 2022, Yerevan State Medical University. All rights reserved

    Физико-химические условия долгосрочного функционирования реставраций с каркасом из диоксида циркония: обзор литературы

    No full text
    The aim of the study is to determine the optimal physico-chemical conditions and factors for the long-term perspective of zirconia-based restorations. Materials and methods Information was searched in English without time limits in the PubMed electronic database, a Google search and literature lists of relevant studies and reviews. Full-text articles from 2003 to 2018 were selected, in which studies of frameworks made of zirconium dioxide, a protocol for changing firing temperatures, and a description of the structure are described. Results. Totally 79 articles were identified. After the selection of articles on the inclusion criteria and removal of duplicate articles, the total number was 5. The review of the literature included studies of 3 types of zirconium: 3Y-TZP, ATZ, 12Ce-TZP. In a number of studies, the authors studied experimentally the influence of the oral environment on the long-term functioning of zirconium, and a number of authors conducted a study on the effect of heating and cooling gradients, as well as mechanical processing of zirconium frameworks. Conclusion. This literature review has shown the optimal physicochemical conditions and factors for the long-term prospects for restorations with a zirconia-based framework, starting from its composition, technical and laboratory stages, and pumping over the oral cavity factors. The combination of these factors can reduce the effect of the transition of zirconium dioxide from the tetragonal to the monoclinic phase, as well as reduce the stress outcomes resulting from the processing of zirconia frameworks and their facing layer.Цель. Определить оптимальные физико-химические условия и факторы для долгосрочной перспективы реставраций с каркасом на основе диоксида циркония. Материалы и методы. Был выполнен поиск информации на английском языке без ограничений по времени в электронной базе данных PubMed, поиск в системе Google и списках литературы соответствующих исследований и обзоров. Были отобраны полнотекстовые статьи с 2003 по 2018 год, в которых описываются исследования каркасов, изготовленных из диоксида циркония, протокол изменения температур обжига, а также описание структуры. Результаты. В данном обзоре литературы было идентифицировано 79 статей. После отбора по критериям включения и удаления повторяющихся статей, итоговое количество стало равным пяти. В обзор литературы вошли исследования трех видов циркония: 3Y-TZP, ATZ, 12Ce-TZP. В ряде работ авторы изучали экспериментальным путем влияние среды полости рта на долгосрочное функционирование циркония. Также ряд авторов провели исследование на влияние градиентов нагревания и охлаждения, а также механическую обработку циркониевых каркасов. Вывод. Данный обзор литературы показал оптимальные физико-химических условия и факторы для долгосрочных перспектив реставраций с каркасом на основе диоксида циркония, начиная от его состава, технико-лабораторных этапов, закачивая преодолением факторов среды полости рта. Совокупность учета данных факторов сможет снизить влияние перехода диоксида циркония из тетрагональной в моноклинную фазу, а также уменьшит исходы напряжения, возникающие в результате обработки каркасов из диоксида циркония и их облицовочного слоя

    Анализ альвеоло-антральной артерии на основе конусно-лучевой компьютерной томографии у пациентов с тяжелой атрофией альвеолярного гребня в боковом отделе верхней челюсти

    No full text
    Lateral sinus floor elevation is the mostly used surgery for alveolar bone augmentation in the posterior maxilla. Although this technique demonstrates predictable results, a range of complications may occur, one of them is bleeding secondary to alveolar antral artery damage. The aim of the study is analysis of alveolar antral artery prevalence, diameter and localization in patients with severe bone atrophy in the posterior maxilla. The results showed that the parameters of the structure do not have significant difference with regards to gender and age. Thus, it is important to provide adequate lateral sinus floor elevation planning with cone beam computed tomography and take in the consideration other factors, such as bony wall thickness.Для восстановления объема костной ткани в боковом отделе верхней челюсти наиболее распространённой операцией является открытый синус-лифтинг. Несмотря на то что данная методика демонстрирует предсказуемые результаты, при ее проведении может возникнуть ряд осложнений, одним из которых является кровотечение в результате повреждения альвеоло-антральной артерии. Целью данной работы являлось исследование встречаемости, диаметра и расположения альвеоло-антральной артерии у пациентов с тяжелой атрофией костной ткани в беззубом боковом отделе верхней челюсти. Результаты показали, что параметры исследуемой структуры не имеют значимой разницы относительно пола и возраста. Таким образом, важно проводить тщательное планирование операции открытого синус-лифтинга с помощью конусно-лучевой компьютерной томографии и учитывать другие факторы, такие как толщина костной стенки

    Анатомические особенности нижнечелюстного резцового канала по данным КЛКТ у пациентов с отсутствием зубов в переднем отделе нижней челюсти (обзор литературы)

    No full text
    Dental implant placement in the anterior mandibula can lead to the range of complications including neurological disorders and bleeding. One of the reasons is mandibular incisive nerve damage that carries homonymous neurovascular bundle. The aim of the study is the review of CBCT-studies of mandibular incisive canal in patients in edentulous anterior mandibula.Установка дентальных имплантатов в переднем отделе нижней челюсти может нести в себе ряд осложнений, включая нейросенсорные нарушения и кровотечения. Одной из причин данных осложнений является повреждение нижнечелюстного резцового канала, который несет в себе одноименный сосудисто-нервный пучок. Целью данной работы являлся обзор исследований нижнечелюстного резцового канала, выполненных с помощью конусно-лучевой компьютерной томографии у пациентов с полным отсутствием зубов в переднем отделе нижней челюсти
    corecore