303 research outputs found

    Correction of Dopant Concentration Fluctuation Effects in Silicon Drift Detectors

    Get PDF
    Dopant fluctuations in silicon wafers are responsible for systematic errors in the determination of the particle crossing point in silicon drift detectors. In this paper, we report on the first large scale measurement of this effect by means of a particle beam. A significant improvement of the anodic resolution has been obtained by correcting for these systematic deviations

    Recent results from beam tests of large area silicon drift detectors

    Get PDF
    Silicon drift detectors with an active area of 7.0 × 7.5 cm2 will equip the two middle layers of the Inner Tracking System of the ALICE experiment. The performance of several prototypes was studied during beam tests carried out at the CERN SPS facility. The results of the beam test data analysis are discussed in this paper

    Recent Developments on the Silicon Drift Detector readout scheme for the ALICE Inner Tracking System

    Get PDF
    Proposal of abstract for LEB99, Snowmass, Colorado, 20-24 September 1999Recent developments of the Silicon Drift Detector (SDD) readout system for the ALICE Experiment are presented. The foreseen readout system is based on 2 main units. The first unit consists of a low noise preamplifier, an analog memory which continuously samples the amplifier output, an A/D converter and a digital memory. When the trigger signal validates the analog data, the ADCs convert the samples into a digital form and store them into the digital memory. The second unit performs the zero suppression/data compression operations. In this paper the status of the design is presented, together with the test results of the A/D converter, the multi-event buffer and the compression unit prototype.Summary:In the Inner Tracker System (ITS) of the ALICE experiment the third and the fourth layer of the detectors are SDDs. These detectors provide the measurement of both the energy deposition and the bi-dimensional position of the track. In terms of readout an SDD can be viewed as a matrix, where the rows are the detector anodes and the columns are the samples to be read during the drift time; therefore, a very large amount of data has to be amplified, converted in digital form and preprocessed in order to avoid the storage of non-significatn data.Since the electron mobility is a strong temperature function, detector temperature has to be kept constant; on the other hand, it is not possible to use very efficient cooling systems because the amount of material in this area is very limited, so the power budget for the electronic readout is very low (less than 6 mW/anode).The simplest solution would be to send the analog signals outside the sensitive area immediately after a preamplification; unfortunately, the ratio between the number of channels (around 200 000) and the space available is so high that the simple solution of sending all the SDD anodes output outside teh detector zone after a low-noise amplification is not practically manageable.Abstract:The adopted solution is based on three main units:(i) A front-end chip that performs low noise amplification, fast analog storage and A/D conversion(ii) A multi-event digital buffer for data derandomization(iii) A data compression/zero suppression and system control boardThe first two units are distributed on the ladders near the detectors and have stringent power and space requirements, while the third unit is placed at both ends of the ladders and in boxes placed on both ends of the TPC detector.The first unit is the most critical part of the system. It works as follows: the detector signals are continuously amplified, sampled and stored in the analog memory with a frequency of 40 MSamples/s The L0d trigger signal stops the write operation, while the L1 trigger signal starts the conversion phase. This phase will continue until the event data are stored in the event buffer if the L2y confirm trigger signal is received, or rejected if the L2n abort signal will be issued by the trigger system.Prototypes of the three parts have been designed and tested while the full chip is currently under design. Tests of the A/D converter will be presented.The multi-event buffer purpose is to de-randomize the even data in order to reduce the transmission speed. Preliminary tests of the first prototype will be presented.The board placed at the end of the ladders performs various functions. It reduces the amount of data through various cascaded algorithms with variable parameters and transmits the data to the SIU board. It also controls the test and slow control system for the ladder circuitry. Tests of the FPGA-based prototypes will be presented.Special care has been taken for the test problem. The ASICs designed are provided of a test control port based on teh IEEE 1149.1 JTAG standard. The same protocol is used for downloading configuration information

    Test Results of the ALICE SDD Electronic Readout Prototypes

    Get PDF
    The first prototypes of the front-end electronics of the ALICE silicon driftdetectors have been designed and tested. The integrated circuits have been designed using state of the art technologies and, for the analog parts, with radiation-tolerantdesign techniques. In this paper, the test results of the building blocks of the PASCAL chip and the first prototype of the AMBRA chip are presented. The prototypes fully respect the ALICE requirements; owingto the use of deep-submicron technologies together with radiation-tolerant layout techniques, the prototypes have shown a toleranceto a radiation dose much higher than the one foreseen for the ALICE environment.(Abstract only available, full text to follow)

    The Silicon Drift Detector readout scheme for the Inner Tracking System of the ALICE Experiment

    Get PDF
    Presentation at Quark Matter '99, Torino, Italy, 10-15 May 1999The Silicon Drift Detectors (SDDs) provide, through the measurement of the drift time of the charge deposited by the particle which crosses the detector, information on the impact point and on the energy deposition. The foreseen readout scheme is based on a single chip implementation of an integrated circuit that includes low-noise amplification, fast analog strorage and analog to digital conversion, thus avoiding the problems related to the analog signal transmission. A multi-event buffer that reduces the transmission bandwidth and a data compression/zero suppression unit complete the architecture.Abstract:In this paper, the system components design is described, together with the results of the first prototypes

    Il Rivelatore a deriva di silicio per l'esperimento ALICE

    Get PDF
    Un rivelatore a deriva di silicio di grande superficie per l'Inner Tracking System dell'esperimento ALICE Ú stato progettato, prodotto e provato. La sua peculiarità principale Ú la capacità di lavorare senza supporti esterni al partitore integrato, grazie anche agli accorgimenti addotati per rinforzarne la stabilità elettrica. Uno dei prototipi Ú stato provato su un fascio di pioni al CERN fornendo una risoluzione spaziale media dell'ordine dei 30 ”m su entrambe le direzioni

    Charge separation relative to the reaction plane in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm NN}}= 2.76 TeV

    Get PDF
    Measurements of charge dependent azimuthal correlations with the ALICE detector at the LHC are reported for Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm NN}} = 2.76 TeV. Two- and three-particle charge-dependent azimuthal correlations in the pseudo-rapidity range ∣η∣<0.8|\eta| < 0.8 are presented as a function of the collision centrality, particle separation in pseudo-rapidity, and transverse momentum. A clear signal compatible with a charge-dependent separation relative to the reaction plane is observed, which shows little or no collision energy dependence when compared to measurements at RHIC energies. This provides a new insight for understanding the nature of the charge dependent azimuthal correlations observed at RHIC and LHC energies.Comment: 12 pages, 3 captioned figures, authors from page 2 to 6, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/286

    A note on comonotonicity and positivity of the control components of decoupled quadratic FBSDE

    Get PDF
    In this small note we are concerned with the solution of Forward-Backward Stochastic Differential Equations (FBSDE) with drivers that grow quadratically in the control component (quadratic growth FBSDE or qgFBSDE). The main theorem is a comparison result that allows comparing componentwise the signs of the control processes of two different qgFBSDE. As a byproduct one obtains conditions that allow establishing the positivity of the control process.Comment: accepted for publicatio

    Multiplicity dependence of jet-like two-particle correlations in p-Pb collisions at sNN\sqrt{s_{NN}} = 5.02 TeV

    Full text link
    Two-particle angular correlations between unidentified charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV. The transverse-momentum range 0.7 <pT,assoc<pT,trig< < p_{\rm{T}, assoc} < p_{\rm{T}, trig} < 5.0 GeV/cc is examined, to include correlations induced by jets originating from low momen\-tum-transfer scatterings (minijets). The correlations expressed as associated yield per trigger particle are obtained in the pseudorapidity range ∣η∣<0.9|\eta|<0.9. The near-side long-range pseudorapidity correlations observed in high-multiplicity p-Pb collisions are subtracted from both near-side short-range and away-side correlations in order to remove the non-jet-like components. The yields in the jet-like peaks are found to be invariant with event multiplicity with the exception of events with low multiplicity. This invariance is consistent with the particles being produced via the incoherent fragmentation of multiple parton--parton scatterings, while the yield related to the previously observed ridge structures is not jet-related. The number of uncorrelated sources of particle production is found to increase linearly with multiplicity, suggesting no saturation of the number of multi-parton interactions even in the highest multiplicity p-Pb collisions. Further, the number scales in the intermediate multiplicity region with the number of binary nucleon-nucleon collisions estimated with a Glauber Monte-Carlo simulation.Comment: 23 pages, 6 captioned figures, 1 table, authors from page 17, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/161

    Multi-particle azimuthal correlations in p-Pb and Pb-Pb collisions at the CERN Large Hadron Collider

    Full text link
    Measurements of multi-particle azimuthal correlations (cumulants) for charged particles in p-Pb and Pb-Pb collisions are presented. They help address the question of whether there is evidence for global, flow-like, azimuthal correlations in the p-Pb system. Comparisons are made to measurements from the larger Pb-Pb system, where such evidence is established. In particular, the second harmonic two-particle cumulants are found to decrease with multiplicity, characteristic of a dominance of few-particle correlations in p-Pb collisions. However, when a âˆŁÎ”Î·âˆŁ|\Delta \eta| gap is placed to suppress such correlations, the two-particle cumulants begin to rise at high-multiplicity, indicating the presence of global azimuthal correlations. The Pb-Pb values are higher than the p-Pb values at similar multiplicities. In both systems, the second harmonic four-particle cumulants exhibit a transition from positive to negative values when the multiplicity increases. The negative values allow for a measurement of v2{4}v_{2}\{4\} to be made, which is found to be higher in Pb-Pb collisions at similar multiplicities. The second harmonic six-particle cumulants are also found to be higher in Pb-Pb collisions. In Pb-Pb collisions, we generally find v2{4}≃v2{6}≠0v_{2}\{4\} \simeq v_{2}\{6\}\neq 0 which is indicative of a Bessel-Gaussian function for the v2v_{2} distribution. For very high-multiplicity Pb-Pb collisions, we observe that the four- and six-particle cumulants become consistent with 0. Finally, third harmonic two-particle cumulants in p-Pb and Pb-Pb are measured. These are found to be similar for overlapping multiplicities, when a âˆŁÎ”Î·âˆŁ>1.4|\Delta\eta| > 1.4 gap is placed.Comment: 25 pages, 11 captioned figures, 3 tables, authors from page 20, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/87
    • 

    corecore