219 research outputs found
Coherent spin transport through a 350-micron-thick Silicon wafer
We use all-electrical methods to inject, transport, and detect spin-polarized
electrons vertically through a 350-micron-thick undoped single-crystal silicon
wafer. Spin precession measurements in a perpendicular magnetic field at
different accelerating electric fields reveal high spin coherence with at least
13pi precession angles. The magnetic-field spacing of precession extrema are
used to determine the injector-to-detector electron transit time. These transit
time values are associated with output magnetocurrent changes (from in-plane
spin-valve measurements), which are proportional to final spin polarization.
Fitting the results to a simple exponential spin-decay model yields a
conduction electron spin lifetime (T1) lower bound in silicon of over 500ns at
60K.Comment: Accepted in PR
Current-Induced Magnetization Reversal in High Magnetic Fields in Co/Cu/Co Nanopillars
Current-induced magnetization dynamics in Co/Cu/Co trilayer nanopillars
(~100nm in diameter) has been studied experimentally for large applied fields
perpendicular to the layers. An abrupt and hysteretic increase in dynamic
resistance is observed at high current densities for one polarity of the
current, comparable to the giant magnetoresistance effect observed at low
fields. A micromagnetic model, that includes a spin-transfer torque, suggests
that the current induces a complete reversal of the thin Co layer to alignment
antiparallel to the applied field-that is, to a state of maximum magnetic
energy.Comment: 11 pages, 3 figures, (submitted to Phys. Rev. Lett.), added missing
figure caption of fig. 3, updated to published versio
Detecting Electronic States at Stacking Faults in Magnetic Thin Films by Tunneling Spectroscopy
Co islands grown on Cu(111) with a stacking fault at the interface present a
conductance in the empty electronic states larger than the Co islands that
follow the stacking sequence of the Cu substrate. Electrons can be more easily
injected into these faulted interfaces, providing a way to enhance transmission
in future spintronic devices. The electronic states associated to the stacking
fault are visualized by tunneling spectroscopy and its origin is identified by
band structure calculations.Comment: 4 pages, 4 figures; to be published in Phys. Rev. Lett (2000
Epitaxial Co2Cr0.6Fe0.4Al thin films and magnetic tunneling junctions
Epitaxial thin films of the theoretically predicted half metal
Co2Cr0.6Fe0.4Al were deposited by dc magnetron sputtering on different
substrates and buffer layers. The samples were characterized by x-ray and
electron beam diffraction (RHEED) demonstrating the B2 order of the Heusler
compound with only a small partition of disorder on the Co sites. Magnetic
tunneling junctions with Co2Cr0.6Fe0.4Al electrode, AlOx barrier and Co counter
electrode were prepared. From the Julliere model a spin polarisation of
Co2Cr0.6Fe0.4Al of 54% at T=4K is deduced. The relation between the annealing
temperature of the Heusler electrodes and the magnitude of the tunneling
magnetoresistance effect was investigated and the results are discussed in the
framework of morphology and surface order based of in situ STM and RHEED
investigations.Comment: accepted by J. Phys. D: Appl. Phy
Spin injection and spin accumulation in all-metal mesoscopic spin valves
We study the electrical injection and detection of spin accumulation in
lateral ferromagnetic metal-nonmagnetic metal-ferromagnetic metal (F/N/F) spin
valve devices with transparent interfaces. Different ferromagnetic metals,
permalloy (Py), cobalt (Co) and nickel (Ni), are used as electrical spin
injectors and detectors. For the nonmagnetic metal both aluminium (Al) and
copper (Cu) are used. Our multi-terminal geometry allows us to experimentally
separate the spin valve effect from other magneto resistance signals such as
the anomalous magneto resistance (AMR) and Hall effects. We find that the AMR
contribution of the ferromagnetic contacts can dominate the amplitude of the
spin valve effect, making it impossible to observe the spin valve effect in a
'conventional' measurement geometry. In a 'non local' spin valve measurement we
are able to completely isolate the spin valve signal and observe clear spin
accumulation signals at T=4.2 K as well as at room temperature (RT). For
aluminum we obtain spin relaxation lengths (lambda_{sf}) of 1.2 mu m and 600 nm
at T=4.2 K and RT respectively, whereas for copper we obtain 1.0 mu m and 350
nm. The spin relaxation times tau_{sf} in Al and Cu are compared with theory
and results obtained from giant magneto resistance (GMR), conduction electron
spin resonance (CESR), anti-weak localization and superconducting tunneling
experiments. The spin valve signals generated by the Py electrodes (alpha_F
lambda_F=0.5 [1.2] nm at RT [T=4.2 K]) are larger than the Co electrodes
(alpha_F lambda_F=0.3 [0.7] nm at RT [T=4.2 K]), whereas for Ni (alpha_F
lambda_F<0.3 nm at RT and T=4.2 K) no spin signal is observed. These values are
compared to the results obtained from GMR experiments.Comment: 16 pages, 12 figures, submitted to PR
Spin battery operated by ferromagnetic resonance
Precessing ferromagnets are predicted to inject a spin current into adjacent
conductors via Ohmic contacts, irrespective of a conductance mismatch with, for
example, doped semiconductors. This opens the way to create a pure spin source
spin battery by the ferromagnetic resonance. We estimate the spin current and
spin bias for different material combinations.Comment: The estimate for the magnitude of the spin bias is improved. We find
that it is feasible to get a measurable signal of the order of the microwave
frequency already for moderate rf intensitie
Spintronics: Fundamentals and applications
Spintronics, or spin electronics, involves the study of active control and
manipulation of spin degrees of freedom in solid-state systems. This article
reviews the current status of this subject, including both recent advances and
well-established results. The primary focus is on the basic physical principles
underlying the generation of carrier spin polarization, spin dynamics, and
spin-polarized transport in semiconductors and metals. Spin transport differs
from charge transport in that spin is a nonconserved quantity in solids due to
spin-orbit and hyperfine coupling. The authors discuss in detail spin
decoherence mechanisms in metals and semiconductors. Various theories of spin
injection and spin-polarized transport are applied to hybrid structures
relevant to spin-based devices and fundamental studies of materials properties.
Experimental work is reviewed with the emphasis on projected applications, in
which external electric and magnetic fields and illumination by light will be
used to control spin and charge dynamics to create new functionalities not
feasible or ineffective with conventional electronics.Comment: invited review, 36 figures, 900+ references; minor stylistic changes
from the published versio
- âŚ