Photodetector based on Vernier-enhanced Fabry-Perot interferometers with a photo-thermal coating

We present a new type of fiber-coupled photodetector with a thermal-based optical sensor head, which enables it to operate even in the presence of strong electro-magnetic interference and in electrically sensitive environments. The optical sensor head consists of three cascaded Fabry-Perot interferometers. The end-face surface is coated with copper-oxide micro-particles embedded in hydrogel, which is a new photo-thermal coating that can be readily coated on many different surfaces. Under irradiation, photons are absorbed by the photo-thermal coating, and are converted into heat, changing the optical path length of the probing light and induces a resonant wavelength shift. For white-light irradiation, the photodetector exhibits a power sensitivity of 760 pm/mW, a power detection limit of 16.4 μW (i.e. specific detectivity of 2.2 × 105 cm.√Hz/W), and an optical damage threshold of ~100 mW or ~800 mW/cm2. The response and recovery times are 3.0 s (~90% of change within 100 ms) and 16.0 s respectively.George Y. Chen, Xuan Wu, Xiaokong Liu, David G. Lancaster, Tanya M. Monro and Haolan X

Cancer detection in human tissue samples using a fiber-tip pH probe

Abstract not availableErik P. Schartner, Matthew R. Henderson, Malcolm Purdey, Deepak Dhatrak, Tanya M. Monro, P. Grantley Gill, and David F. Calle

Advances and limitations in the modelling of fabricated photonic bandgap fibers

Copyright © 2006 IEEEWe model fabricated silica photonic bandgap fibers and achieve good agreement between simulated and measured properties. We identify the size of the SEM bitmap image as the ultimate limit to the accurate calculation of surfaces modes within the bandgapF. Poletti, M. N. Petrovich, R. Amezcua-Correa, N. G. Broderick, T. M. Monro and D. J. Richardsonhttp://eprints.soton.ac.uk/47883

Brillouin suppression through longitudinal structural variation in high nonlinearity silica holey fibers

Copyright © 2006 IEEEWe consider longitudinal variation in the fiber structure as a method of increasing the Brillouin linewidth and threshold within high nonlinearity silica holey fibers. Strategies to control the associated variation in nonlinearity and dispersion along the fiber length are described.http://www.ofcnfoec.org/materials/06AbstractsWednesday.pd

Microwire fibers for low-loss THz transmission

This paper was presented at Smart Structures, Devices, and Systems, which was a sub-conference contained within Smart Materials, Nano- and Micro-Smart Systems Symposium (10-13 December 2006 : Adelaide, South Australia). This paper was published in Smart Structures, Devices, and Systems III, edited by Said F. Al-Sarawi, Proc. of SPIE Vol. 6414, 64140I and is made available as an electronic reprint with permission of SPIE. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.In this paper, we will investigate microwire fibers for low-loss terahertz transmission. Microwires, air-clad wire waveguides with diameter smaller than the operating wavelength (a few μm), have an enhanced evanescent field and tight wave confinement resulting in a low loss waveguide structure for the terahertz (T-ray) frequency regime. Based on our experimental data for the bulk material absorption of four glasses (F2, SF6, SF57 and Bismuth) and a polymer (PMMA), we calculate the normalized field distribution, power fraction outside the wire and effective loss. It will be shown that regardless of material, the effective loss of all microwires converges to the same order < 0.01 cm -1.Shaghik Atakaramians, Shahraam Afshar Vahid, Bernd M. Fischer, Heike Ebendorff-Heidepriem, Tanya Monro and Derek Abbotthttp://spie.org/Documents/ConferencesExhibitions/au06-final.pd