1,348 research outputs found
Connection Between System Parameters and Localization Probability in Network of Randomly Distributed Nodes
This article deals with localization probability in a network of randomly
distributed communication nodes contained in a bounded domain. A fraction of
the nodes denoted as L-nodes are assumed to have localization information while
the rest of the nodes denoted as NL nodes do not. The basic model assumes each
node has a certain radio coverage within which it can make relative distance
measurements. We model both the case radio coverage is fixed and the case radio
coverage is determined by signal strength measurements in a Log-Normal
Shadowing environment. We apply the probabilistic method to determine the
probability of NL-node localization as a function of the coverage area to
domain area ratio and the density of L-nodes. We establish analytical
expressions for this probability and the transition thresholds with respect to
key parameters whereby marked change in the probability behavior is observed.
The theoretical results presented in the article are supported by simulations.Comment: To appear on IEEE Transactions on Wireless Communications, November
200
On the Throughput Allocation for Proportional Fairness in Multirate IEEE 802.11 DCF
This paper presents a modified proportional fairness (PF) criterion suitable
for mitigating the \textit{rate anomaly} problem of multirate IEEE 802.11
Wireless LANs employing the mandatory Distributed Coordination Function (DCF)
option. Compared to the widely adopted assumption of saturated network, the
proposed criterion can be applied to general networks whereby the contending
stations are characterized by specific packet arrival rates, , and
transmission rates .
The throughput allocation resulting from the proposed algorithm is able to
greatly increase the aggregate throughput of the DCF while ensuring fairness
levels among the stations of the same order of the ones available with the
classical PF criterion. Put simply, each station is allocated a throughput that
depends on a suitable normalization of its packet rate, which, to some extent,
measures the frequency by which the station tries to gain access to the
channel. Simulation results are presented for some sample scenarios, confirming
the effectiveness of the proposed criterion.Comment: Submitted to IEEE CCNC 200
Functionalization of particles and selective functionalization of surfaces for the electroless metal plating process
Electroless plating is a metal deposition technique widely used in the coating industry. It is the method of choice to plate substrates with complex geometries and nonconductive surfaces, such as polymers and ceramics, since it is based on a chemical reduction in solution rather than on an external electrical energy source like the electroplating method. Among others, examples of well-established applications are the electroless deposition of decorative metal coatings such as gold and silver, wear and corrosion resistant nickel coatings, particularly to coat drive shafts, rotors, and bathroom fixtures, as well as the electroless deposition of copper in electronic devices as diffusion barriers and conductive circuit elements.
In the academic research, electroless plating is extensively used thanks to its low cost, simple equipment and versatility that allow rapid prototyping. Two common applications are the coating of small particles and the selective plating of flat surfaces. Metal coated ceramic particles are of enormous interest in many scientific fields, e.g. fluorescent diagnostics in biochemistry, catalysis, and fabrication of photonic crystals. Metal coated ceramic nanoparticles and microparticles are also gaining attention as potential candidates in the fabrication of higher quality metal matrix Composites, which is one of the applications addressed by this work. Metal coated ceramic particles are easier to integrate in metal matrix composites, avoiding aggregation caused by the low wettability of the particles by the matrix metal, and are potentially shielded from oxidation and undesired chemical reactions that take place at the interface between the particles and the metal Matrix.
Electroless plating is an autocatalytic process, meaning that the deposited metal atoms catalyze the deposition of further metal. In order to achieve the first stable metal seeds on a surface, the latter has to be functionalized. Without this functionalization the metal ions in the electroless plating bath are not reduced or are simply reduced to metal nanoparticles in solution. The traditional activation step for nonconductive surfaces is performed by immersion of the substrate in palladium based solutions, which is very time-consuming and extremely expensive. In particular for nanoparticles, previous work showed that at least 1015 Pd atoms/cm2 are required for a uniform activation of a surface, meaning that in the case of nanoparticles with a surface area of about 100 m2/g are necessary 6.4 g of palladium for each gram of substrate. Assuming a price of about 150 €/g (laboratory scale) for palladium nanoparticles and palladium precursors used for surface activation, it results that the activation of 1 g of nanoparticles costs around 1000 €.
Such costs are suboptimal considering the typical production scale, and therefore alternative functionalization methods are desired. In this work, new organic-based functionalization methods based on (3-mercaptopropyl)triethoxysilane to functionalize oxide particles, 3-aminopropylphosphonic acid to activate carbide particles and a substrate-independent method based on the bioinspired polydopamine are developed and investigated in detail, together with the respective electroless plating baths, which often have to be specifically tailored regarding the different reactivity of the different molecules and substrates. Furthermore, in the fabrication of metallic patterns on substrates by electroless plating, new, simple, and cost-effective activation and metal deposition processes are desired. In this work, two new methods are presented, one based on the printing of (3-mercaptopropyl)triethoxysilane by microcontact printing, the other based on the capillary force lithography of polymethylmethacrylate
On the Behavior of the Distributed Coordination Function of IEEE 802.11 with Multirate Capability under General Transmission Conditions
The aim of this paper is threefold. First, it presents a multi-dimensional
Markovian state transition model characterizing the behavior of the IEEE 802.11
protocol at the Medium Access Control layer which accounts for packet
transmission failures due to channel errors modeling both saturated and
non-saturated traffic conditions. Second, it provides a throughput analysis of
the IEEE 802.11 protocol at the data link layer in both saturated and
non-saturated traffic conditions taking into account the impact of both the
physical propagation channel and multirate transmission in Rayleigh fading
environment. The general traffic model assumed is M/M/1/K. Finally, it shows
that the behavior of the throughput in non-saturated traffic conditions is a
linear combination of two system parameters; the payload size and the packet
rates, , of each contending station. The validity interval of
the proposed model is also derived.
Simulation results closely match the theoretical derivations, confirming the
effectiveness of the proposed models.Comment: Submitted to IEEE Transactions on Wireless Communications, October
21, 200
A Model of the IEEE 802.11 DCF in Presence of Non Ideal Transmission Channel and Capture Effects
In this paper, we provide a throughput analysis of the IEEE 802.11 protocol
at the data link layer in non-saturated traffic conditions taking into account
the impact of both transmission channel and capture effects in Rayleigh fading
environment. Impacts of both non-ideal channel and capture become important in
terms of the actual observed throughput in typical network conditions whereby
traffic is mainly unsaturated, specially in an environment of high
interference.
We extend the multi-dimensional Markovian state transition model
characterizing the behavior at the MAC layer by including transmission states
that account for packet transmission failures due to errors caused by
propagation through the channel, along with a state characterizing the system
when there are no packets to be transmitted in the buffer of a station.Comment: Accepted for oral presentation to IEEE Globecom 2007, Washington
D.C., November 200
On The Linear Behaviour of the Throughput of IEEE 802.11 DCF in Non-Saturated Conditions
We propose a linear model of the throughput of the IEEE 802.11 Distributed
Coordination Function (DCF) protocol at the data link layer in non-saturated
traffic conditions. We show that the throughput is a linear function of the
packet arrival rate (PAR) with a slope depending on both the number
of contending stations and the average payload length. We also derive the
interval of validity of the proposed model by showing the presence of a
critical , above which the station begins operating in saturated
traffic conditions.
The analysis is based on the multi-dimensional Markovian state transition
model proposed by Liaw \textit{et al.} with the aim of describing the behaviour
of the MAC layer in unsaturated traffic conditions. Simulation results closely
match the theoretical derivations, confirming the effectiveness of the proposed
linear model.Comment: To appear on IEEE Communications Letters, November 200
- …