Synthesis, Characterization, and Evaluation of Evaporated Casting MWCNT/Chitosan Composite Membranes for Water Desalination

Fresh water scarcity and pollution turn out to be a most serious issue throughout the world due to the rapid population growth. The application of nanomaterials (NMs) for the removal of pollutants from water has attracted significant attention. The nanofiltration membrane was fabricated through the evaporative casting (EC) method using multiwalled carbon nanotubes (MWCNT) and chitosan (CHIT) as the surfactant to enable water purification. The developed EC membrane properties were characterized in mechanical, surface charging (zeta potential), surface morphology, and hydrophobicity properties. Results demonstrated that incorporation of MWCNT and the biopolymers (chitosan) resulted in suitable developments in mechanical properties of the membrane. For example, the membrane has shown values for tensile strength (28 ± 1 MPa), elongation (10.2 ± 1.2%), Young’s modulus (1.2 ± 0.1 GPa), and toughness of (1.9 ± 0.2 J/g). When more significant changes were investigated on the surface morphology of the EC membrane, it was observed that the pores on the surface morphology of the EC membrane decreased as the evaporative casting method was used. Moreover, the permeability of the membrane towards water, inorganic salts, and pH effect on salt rejections was studied using the NF/RO system. These established nanocomposite membranes signify the promising candidates for fresh water desalination and elimination of organic impurities

The Oxidation Behavior of ZrB₂-SiC Ceramic Composites Fabricated by Plasma Spray Process

Our goal is to develop a structural ceramic for high-temperature applications in which silicon carbide-based materials (SiCs) are used as matrix composites. The potential of SiCs to deposit a mixture of SiC and zirconium diboride (ZrB2) plasma spray coating is analyzed. To deposit thermal barrier layers containing up to 50 vol.% SiC, a high-pressure plasma spray (HPPS) process was used. Although the SiC cannot be deposited by thermal spray, a mixture of SiC and zirconium diboride (ZrB2) was deposited because these two compounds form a eutectic phase at a temperature below SiC decomposition. The preference was two different forms, 3 mm and 1 mm, of graphite substrates with different thickness values. A comparison of the morphology of SiC-ZrB2 coatings before and after thermal treatment was performed by applying heat to the surface of a gas torch and traditional furnace between 800 °C and 1200 °C. The growth of the oxide scale was calculated with X-ray diffraction (XRD), scanning electron microscopy (SEM)/energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), and density. The oxide scale consists of a SiO2 layer with ZrO2 groups. The findings indicate a greater potential for the studied material in protecting against high-temperature oxidation and in a wide variety of aerospace applications

Comprehensive Review of the Properties and Modifications of Carbon Fiber-Reinforced Thermoplastic Composites

Carbon fiber-reinforced polymers are considered a promising composite for many industrial applications including in the automation, renewable energy, and aerospace industries. They exhibit exceptional properties such as a high strength-to-weight ratio and high wear resistance and stiffness, which give them an advantage over other conventional materials such as metals. Various polymers can be used as matrices such as thermosetting, thermoplastic, and elastomers polymers. This comprehensive review focuses on carbon fiber-reinforced thermoplastic polymers due to the advantages of thermoplastic compared to thermosetting and elastomer polymers. These advantages include recyclability, ease of processability, flexibility, and shorter production time. The related properties such as strength, modulus, thermal conductivity, and stability, as well as electrical conductivity, are discussed in depth. Additionally, the modification techniques of the surface of carbon fiber, including the chemical and physical methods, are thoroughly explored. Overall, this review represents and summarizes the future prospective and research developments carried out on carbon fiber-reinforced thermoplastic polymers

Manufacturing of carbon fiber reinforced thermoplastics and its recovery of carbon fiber: A review

Polymer matrix composites are excellent materials for a variety of industrial applications. They have superior mechanical, thermal and electrical properties, making them preferable to traditional materials such as metal. To make polymer matrix composite materials, thermosetting, elastomers and thermoplastic polymers are mainly the three types of polymers that can be utilized as matrices. In comparison to thermosetting and elastomers polymers, carbon fiber reinforced thermoplastic (CFRTP), is the subject of this research, are gaining popularity in many industrial sectors due to its recyclability, simplicity of processing, good characteristics, flexibility, and less production time. This review covers conventional and state-of-the-art manufacturing techniques of CFRTP. Moreover, the potential and existing of CFRTP's application as well as the techniques of carbon fiber recovery and recycling methods of such materials were also examined. Overall, this study considers the research and development on manufacturing CFRTP and recycling techniques of polymer composites to recover carbon fiber materials