Synthesis, Characterization, and Evaluation of Antimicrobial Efficacy of Reduced Graphene–ZnO–Copper Nanocomplex

The prevalence of antibiotic-resistant diseases drives a constant hunt for new substitutes. Metal-containing inorganic nanoparticles have broad-spectrum antimicrobial potential to kill Gram-negative and Gram-positive bacteria. In this investigation, reduced graphene oxide-coated zinc oxide–copper (rGO@ZnO–Cu) nanocomposite was prepared by anchoring Cu over ZnO nanorods followed by coating with graphene oxide (GO) and subsequent reduction of GO to rGO. The synthesized nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, elemental analysis, and elemental mapping. Morphologically, ZnO–Cu showed big, irregular rods, rectangular and spherical-shaped ZnO, and anchored clusters of aggregated Cu particles. The Cu aggregates are spread uniformly throughout the network. Most of the ZnO particles were partially covered with Cu aggregates, while some of the ZnO was fully covered with Cu. In the case of rGO@ZnO–Cu, a few layered rGO sheets were observed on the surface as well as deeply embedded inside the network of ZnO–Cu. The rGO@ZnO–Cu complex exhibited antimicrobial activity against Gram-positive and Gram-negative bacteria; however, it was more effective on Staphylococcus aureus than Escherichia coli. Thus, rGO@ZnO–Cu nanocomposites could be an effective alternative against Gram-positive and Gram-negative bacterial pathogens.</jats:p

Synthesis, Characterization, and Evaluation of Antimicrobial Efficacy of Reduced Graphene–ZnO–Copper Nanocomplex

The prevalence of antibiotic-resistant diseases drives a constant hunt for new substitutes. Metal-containing inorganic nanoparticles have broad-spectrum antimicrobial potential to kill Gram-negative and Gram-positive bacteria. In this investigation, reduced graphene oxide-coated zinc oxide–copper (rGO@ZnO–Cu) nanocomposite was prepared by anchoring Cu over ZnO nanorods followed by coating with graphene oxide (GO) and subsequent reduction of GO to rGO. The synthesized nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, elemental analysis, and elemental mapping. Morphologically, ZnO–Cu showed big, irregular rods, rectangular and spherical-shaped ZnO, and anchored clusters of aggregated Cu particles. The Cu aggregates are spread uniformly throughout the network. Most of the ZnO particles were partially covered with Cu aggregates, while some of the ZnO was fully covered with Cu. In the case of rGO@ZnO–Cu, a few layered rGO sheets were observed on the surface as well as deeply embedded inside the network of ZnO–Cu. The rGO@ZnO–Cu complex exhibited antimicrobial activity against Gram-positive and Gram-negative bacteria; however, it was more effective on Staphylococcus aureus than Escherichia coli. Thus, rGO@ZnO–Cu nanocomposites could be an effective alternative against Gram-positive and Gram-negative bacterial pathogens

Graphene@Curcumin-Copper Paintable Coatings for the Prevention of Nosocomial Microbial Infection

The rise of antimicrobial resistance has brought into focus the urgent need for the next generation of antimicrobial coating. Specifically, the coating of suitable antimicrobial nanomaterials on contact surfaces seems to be an effective method for the disinfection/contact killing of microorganisms. In this study, the antimicrobial coatings of graphene@curcumin-copper (GN@CR-Cu) were prepared using a chemical synthesis methodology. Thus, the prepared GN@CR-Cu slurry was successfully coated on different contact surfaces, and subsequently, the GO in the composite was reduced to graphene (GN) by low-temperature heating/sunlight exposure. Scanning electron microscopy was used to characterize the coated GN@CR-Cu for the coating properties, X-ray photon scattering were used for structural characterization and material confirmation. From the morphological analysis, it was seen that CR and Cu were uniformly distributed throughout the GN network. The nanocomposite coating showed antimicrobial properties by contact-killing mechanisms, which was confirmed by zone inhibition and scanning electron microscopy. The materials showed maximum antibacterial activity against E. coli (24 ± 0.50 mm) followed by P. aeruginosa (18 ± 0.25 mm) at 25 µg/mL spot inoculation on the solid media plate, and a similar trend was observed in the minimum inhibition concentration (80 µg/mL) and bactericidal concentration (160 µg/mL) in liquid media. The synthesized materials showed excellent activity against E. coli and P. aeruginosa. These materials, when coated on different contact surfaces such medical devices, might significantly reduce the risk of nosocomial infection.</jats:p

Antimicrobial Activity of Graphene-Based Nanocomposites: Synthesis, Characterization, and Their Applications for Human Welfare

Graphene (GN)-related nanomaterials such as graphene oxide, reduced graphene oxide, quantum dots, etc., and their composites have attracted significant interest owing to their efficient antimicrobial properties and thus newer GN-based composites are being readily developed, characterized, and explored for clinical applications by scientists worldwide. The GN offers excellent surface properties, i.e., a large surface area, pH sensitivity, and significant biocompatibility with the biological system. In recent years, GN has found applications in tissue engineering owing to its impressive stiffness, mechanical strength, electrical conductivity, and the ability to innovate in two-dimensional (2D) and three-dimensional (3D) design. It also offers a photothermic effect that potentiates the targeted killing of cells via physicochemical interactions. It is generally synthesized by physical and chemical methods and is characterized by modern and sophisticated analytical techniques such as NMR, Raman spectroscopy, electron microscopy, etc. A lot of reports show the successful conjugation of GN with existing repurposed drugs, which improves their therapeutic efficacy against many microbial infections and also its potential application in drug delivery. Thus, in this review, the antimicrobial potentialities of GN-based nanomaterials, their synthesis, and their toxicities in biological systems are discussed

Graphene@Curcumin-Copper Paintable Coatings for the Prevention of Nosocomial Microbial Infection

The rise of antimicrobial resistance has brought into focus the urgent need for the next generation of antimicrobial coating. Specifically, the coating of suitable antimicrobial nanomaterials on contact surfaces seems to be an effective method for the disinfection/contact killing of microorganisms. In this study, the antimicrobial coatings of graphene@curcumin-copper (GN@CR-Cu) were prepared using a chemical synthesis methodology. Thus, the prepared GN@CR-Cu slurry was successfully coated on different contact surfaces, and subsequently, the GO in the composite was reduced to graphene (GN) by low-temperature heating/sunlight exposure. Scanning electron microscopy was used to characterize the coated GN@CR-Cu for the coating properties, X-ray photon scattering were used for structural characterization and material confirmation. From the morphological analysis, it was seen that CR and Cu were uniformly distributed throughout the GN network. The nanocomposite coating showed antimicrobial properties by contact-killing mechanisms, which was confirmed by zone inhibition and scanning electron microscopy. The materials showed maximum antibacterial activity against E. coli (24 &plusmn; 0.50 mm) followed by P. aeruginosa (18 &plusmn; 0.25 mm) at 25 &micro;g/mL spot inoculation on the solid media plate, and a similar trend was observed in the minimum inhibition concentration (80 &micro;g/mL) and bactericidal concentration (160 &micro;g/mL) in liquid media. The synthesized materials showed excellent activity against E. coli and P. aeruginosa. These materials, when coated on different contact surfaces such medical devices, might significantly reduce the risk of nosocomial infection

Silver Anchored Polyaniline@Molybdenum Disulfide Nanocomposite (Ag/Pani@MoS2) for Highly Efficient Ammonia and Methanol Sensing under Ambient Conditions: A Mechanistic Approach

We report the synthesis of silver anchored and para toluene sulfonic acid (pTSA) doped polyaniline/molybdenum disulfide nanocomposite (pTSA/Ag-Pani@MoS2) for highly reproducible room temperature detection of ammonia and methanol. Pani@MoS2 was synthesized by in situ polymerization of aniline in the presence of MoS2 nanosheets. The chemical reduction of AgNO3 in the presence of Pani@MoS2 led to the anchoring of Ag to Pani@MoS2 and finally doping with pTSA produced highly conductive pTSA/Ag-Pani@MoS2. Morphological analysis showed Pani-coated MoS2 along with the observation of Ag spheres and tubes well anchored to the surface. Structural characterization by X-ray diffraction and X-ray photon spectroscopy showed peaks corresponding to Pani, MoS2, and Ag. The DC electrical conductivity of annealed Pani was 11.2 and it increased to 14.4 in Pani@MoS2 and finally to 16.1 S/cm with the loading of Ag. The high conductivity of ternary pTSA/Ag-Pani@MoS2 is due to Pani and MoS2 π–π* interactions, conductive Ag, as well as the anionic dopant. The pTSA/Ag-Pani@MoS2 also showed better cyclic and isothermal electrical conductivity retention than Pani and Pani@MoS2, owing to the higher conductivity and stability of its constituents. The ammonia and methanol sensing response of pTSA/Ag-Pani@MoS2 showed better sensitivity and reproducibility than Pani@MoS2 owing to the higher conductivity and surface area of the former. Finally, a sensing mechanism involving chemisorption/desorption and electrical compensation is proposed.</jats:p

Facile and Scale Up Synthesis of Red Phosphorus-Graphitic Carbon Nitride Heterostructures for Energy and Environment Applications

AbstractThe development of heterostructured materials for efficient solar energy conversion and energy storage devices are essential for practical applications. In this study, a simple and relatively inexpensive method was used to improve the visible light-driven photocatalytic activity and electrochemical supercapacitor behavior of the graphitic carbon nitride (g-C3N4) by elemental red phosphorus (RPh). The as-prepared RPh-g-C3N4 was characterized in detail using a range of spectroscopic techniques to understand the structure, morphology, chemical interaction and chemical state of the materials. The visible light-driven photocatalytic activity and supercapacitive electrode performance were assessed by the photodegradation of model colored, non-colored organic pollutants and electrochemical half-cell measurements, respectively. The RPh-g-C3N4 heterostructure with 30 weight percent of RPh exhibited remarkably high photocatalytic activity for the degradation of pollutants compared to the bare constituent materials, which was further confirmed by the photoelectrochemical study under similar visible photoirradiation conditions. The RPh-g-C3N4 heterostructure supercapacitor electrode displayed a high capacitance of 465 F/g and excellent cyclic stability with capacitance retention of 90% after 1000 cycles at a current of 10 A/g. The superior performance was attributed mainly to the narrow band gap, high surface area, capacitive nature of RPh and nitrogen-rich skeleton of g-C3N4.</jats:p