Performance Enhancement of Perovskite Quantum Dot Light-Emitting Diodes via Management of Hole Injection

Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is widely used in optoelectronic devices due to its excellent hole current conductivity and suitable work function. However, imbalanced carrier injection in the PEDOT:PSS layer impedes obtaining high-performance perovskite light-emitting diodes (PeLEDs). In this work, a novel poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,40-(N-(p-butylphenyl))diphenylamine)] (TFB) is applied as the hole transport layers (HTLs) to facilitate the hole injection with cascade-like energy alignment between PEDOT:PSS and methylammonium lead tribromide (MAPbBr3) film. Our results indicate that the introduced TFB layer did not affect the surface morphology or lead to any additional surface defects of the perovskite film. Consequently, the optimal PeLEDs with TFB HTLs show a maximum current efficiency and external quantum efficiency (EQE) of 21.26 cd A−1 and 6.68%, respectively. Such EQE is 2.5 times higher than that of the control devices without TFB layers. This work provides a facile and robust route to optimize the device structure and improve the performance of PeLEDs

Preparation of aluminum nanomesh thin films from an anodic aluminum oxide template as transparent conductive electrodes

We have employed anodic aluminum oxide as a template to prepare ultrathin, transparent, and conducting Al films with a unique nanomesh structure for transparent conductive electrodes. The anodic aluminum oxide template is obtained through direct anodization of a sputtered Al layer on a glass substrate, and subsequent wet etching creates the nanomesh metallic film. The optical and conductive properties are greatly influenced by experimental conditions. By tuning the anodizing time, transparent electrodes with appropriate optical transmittance and sheet resistance have been obtained. The results demonstrate that our proposed strategy can serve as a potential method to fabricate low-cost TCEs to replace conventional indium tin oxide materials.Published versio

High breakdown strength and outstanding piezoelectric performance in flexible PVDF based percolative nanocomposites through the synergistic effect of topological-structure and composition modulations

Over decades, the fabrication of flexible poly(vinylidene fluoride) (PVDF) based percolative nanocomposites with high piezoelectric performance is of great concern from both academia and industry. However, the issue of sharply declined breakdown strength in percolative nanocomposites poses an obstacle to realizing the full potential of conductive nanofillers in enhancing piezoelectricity. Herein, we demonstrated that through proper topological structure and composition modulations, notably improved breakdown strength and piezoelectric performance can be achieved in PVDF based percolative nanocomposites. By constructing a sandwiched structure where a layer of high breakdown strength is intercalated between layers containing high content (near percolation threshold) of conductive nanofillers, the breakdown strength of overall nanocomposites is significantly strengthened and thus allows for sufficient poling of outer layers, fulfilling the great potential of conductive nanofillers in yielding piezoelectricity enhancement. A super high piezoelectric coefficient d33 of 48 pC/N is obtained in the optimized sandwich nanocomposites

Sequential Processing Enables 17% All-Polymer Solar Cells via Non-Halogen Organic Solvent

All-polymer solar cells (All-PSCs), whose electron donor and acceptors are both polymeric materials, have attracted great research attention in the past few years. However, most all-PSC devices with top-of-the-line efficiencies are processed from chloroform. In this work, we apply the sequential processing (SqP) method to fabricate All-PSCs from an aromatic hydrocarbon solvent, toluene, and obtain efficiencies up to 17.0%. By conducting a series of characterizations on our films and devices, we demonstrate that the preparation of SqP devices using toluene can effectively reduce carrier recombination, enhance carrier mobility and promote the fill factor of the device

The Circular RNA hsa_circ_0001445 Regulates the Proliferation and Migration of Hepatocellular Carcinoma and May Serve as a Diagnostic Biomarker

Circular RNAs (circRNA), a class of noncoding RNAs, have been found to be involved in various diseases. Here, the expression levels of the circRNA hsa_circ_0001445 in 73 pairs of hepatocellular carcinoma (HCC) and adjacent nontumor tissues were investigated by quantitative real-time polymerase chain reaction (qRT-PCR). Our data demonstrate that the hsa_circ_0001445 levels were significantly decreased in HCC tissues (P<0.001) and markedly associated with the number of tumor foci (P=0.014). Furthermore, in vitro approaches showed that overexpression of hsa_circ_0001445 promoted apoptosis and inhibited proliferation, migration, and invasion of HCC-derived cells, suggesting that hsa_circ_0001445 might be involved in the development of HCC. In addition, we found that the plasma hsa_circ_0001445 transcription levels in HCC patients were lower than those in cirrhosis (P<0.001) and hepatitis B (P<0.001) patients as well as in healthy controls (P<0.001). In fact, receiver operating characteristic curve analysis indicated that plasma hsa_circ_0001445 could be a fairly accurate marker to distinguish HCC cases from healthy controls as well as patients with cirrhosis or hepatitis B

Efficient All-Polymer Solar Cells with Sequentially Processed Active Layers

In this work, we apply the sequential processing (SqP) method to address the relatively low electron mobility in recent all-polymer solar cells (all-PSCs) based on the polymerized small-molecule acceptor (PSMA). Compared to the blend-casting (BC) method, all-PSCs composed of PM6/PY-IT via the SqP method show boosted electron mobility and a more balanced charge carrier transport, which increases the FF of the SqP device and compensates for the short-circuit current loss, rendering comparable overall performance with the BC device. Through film-depth-dependent light absorption spectroscopy, we analyze the sub-layer absorption and exciton generation rate in the vertical direction of the device, and discuss the effect of the increased electron mobility on device performance, accordingly

A comprehensive health classification model based on support vector machine for proseal laryngeal mask and tracheal catheter assessment in herniorrhaphy

Purpose: In order to classify different types of health data collected in clinical practice of hernia surgery more effectively and improve the classification performance of support vector machine (SVM). Methods: A prospective randomized study was conducted. Sixty patients undergoing hernia repair under general anesthesia were randomly divided into two groups, PLMA group (n = 30) and ETT group (n = 30), for airway management. Heart rate, systolic blood pressure, diastolic blood pressure, mean arterial pressure, respiratory parameters and the incidence of complications related to ProSeal laryngeal mask airway (PLMA) and endotracheal tube (ETT) were collected in clinical experiments in order to evaluate the operation condition. On the basis of this experiment, at first, expert credibility is introduced to process the index value; secondly, the classification weight of the index is objectively determined by the information entropy output of the index itself; finally, a comprehensive classification model of support vector machine based on key sample set is proposed and its advantages are evaluated. Result: After classifying the experimental data, we found that SVM can accurately judge the effect of surgery by data. In this experiment, PLMA method is better than ETT method in xenon repair operation. Discussion: SVM has great accuracy and practicability in judging the outcome of xenon repair operation. Conclusion: The proposed index classification weight model can deal with the uncertainties caused by uncertain information and give the confidence of the uncertain information. Compared with the traditional SVM method, the proposed method based on SVM and key sample set greatly reduces the number of samples that misjudge the effect of samples, and improves the practicability of SVM method. It is concluded that PLMA is superior to the ETT technique to hernia surgical. The idea of constructing classification model based on key sample set proposed in this paper can also be used for reference in other data mining methods

Marked Efficiency Improvement of FAPb0.7Sn0.3Br3 Perovskite Light-Emitting Diodes by Optimization of the Light-Emitting Layer and Hole-Transport Layer

Highly luminescent FAPb0.7Sn0.3Br3 nanocrystals with an average photoluminescence (PL) quantum yield of 92% were synthesized by the ligand-assisted reprecipitation method. The 41-nm-thick perovskite film with a smooth surface and strong PL intensity was proven to be a suitable luminescent layer for perovskite light-emitting diodes (PeLEDs). Electrical tests indicate that the double hole-transport layers (HTLs) played an important role in improving the electrical-to-optical conversion efficiency of PeLEDs due to their cascade-like level alignment. The PeLED based on poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,40-(N-(p-butylphenyl))-diphenylamine)] (TFB)/poly(9-vinylcarbazole) (PVK) double HTLs produced a high external quantum efficiency (EQE) of 9%, which was improved by approximately 10.9 and 5.14 times when compared with single HTL PVK or the TFB device, respectively. The enhancement of the hole transmission capacity by TFB/PVK double HTLs was confirmed by the hole-only device and was responsible for the dramatic EQE improvement

Review for Rare-Earth-Modified Perovskite Materials and Optoelectronic Applications

In recent years, rare-earth metals with triply oxidized state, lanthanide ions (Ln3+), have been demonstrated as dopants, which can efficiently improve the optical and electronic properties of metal halide perovskite materials. On the one hand, doping Ln3+ ions can convert near-infrared/ultraviolet light into visible light through the process of up-/down-conversion and then the absorption efficiency of solar spectrum by perovskite solar cells can be significantly increased, leading to high device power conversion efficiency. On the other hand, multi-color light emissions and white light emissions originated from perovskite nanocrystals can be realized via inserting Ln3+ ions into the perovskite crystal lattice, which functioned as quantum cutting. In addition, doping or co-doping Ln3+ ions in perovskite films or devices can effectively facilitate perovskite film growth, tailor the energy band alignment and passivate the defect states, resulting in improved charge carrier transport efficiency or reduced nonradiative recombination. Finally, Ln3+ ions have also been used in the fields of photodetectors and luminescent solar concentrators. These indicate the huge potential of rare-earth metals in improving the perovskite optoelectronic device performances