10 research outputs found

    A Summary of “Petrophysics and Geochemistry of Unconventional Reservoirs”

    No full text
    Unconventional reservoirs are discovered in all petroleum basins around the world [...

    Application of the Data on δ13C and δ18O of Carbonates for the Study of Unconventional Reservoirs on the Example of the Bazhenov Source Rocks, Western Siberia, Russia

    No full text
    This paper addresses potential application of data on stable carbon and oxygen isotope composition of carbonates for study of organic rich source rocks on the example of the Late Jurassic–Early Cretaceous Bazhenov Formation (West Siberian petroleum basin, Russia). Geochemical studies were conducted for sections located in central (most productive) and peripheral (northern and southern) regions of the Bazhenov Formation distribution area, containing deposits formed under different conditions. We identified key factors impacting stable isotope composition of carbonate minerals and established relation of their isotope composition to the formation conditions. Using a thermodynamic model of carbon and oxygen isotope exchange in the carbonate–water–carbon dioxide system, it is shown that variations in the isotope composition of secondary carbonates are affected by isotopic composition of primary carbonates in sediments and by the isotope exchange reactions with water and carbon dioxide, generated during the source rocks transformation. Our results demonstrate that stable isotope data for carbonates in the Bazhenov Formation together with standard geochemical methods can be efficiently applied to determine sedimentation conditions and secondary alteration processes of oil source rocks

    The Study of Uranium Accumulation in Marine Bottom Sediments: Effect of Redox Conditions at the Time of Sedimentation

    No full text
    To evaluate the effect of redox conditions at the sedimentation stage on uranium content and U/TOC ratio in marine source rocks, we analyzed the accumulation of uranium in modern marine bottom sediments formed in different redox conditions. The behavior of uranium from bottom sediments formed in oxidizing and sub-oxidizing settings has been studied on the sediments of the Upper Pleistocene–Holocene age accumulated in the coastal area of the White Sea (Kandalaksha Gulf). We studied the content of uranium, Eh, pH, TOC, C, H, N, and S element and isotope compositions and other parameters in two sampled columns of bottom sediments at a depth of 0–2.5 m. The composition of sediments was typical for the shelf zone where marine genesis mixes with the continental run-off. The upper layer of sediments (0–50 cm) were characterized by oxidizing conditions (Eh ~ 400 mV); with the increase in depth, redox conditions changed from oxidizing to reducing (−0 ÷ −200 mV). The uranium concentration in the upper layer was 1–1.5 ppm, U/TOC ratio varied in the range of 0.8–1.1 ppmU/%TOC. The uranium content and U/TOC ratio increased up to the values of 2.6 ppm and 1.4 ppmU/%TOC at a depth of 0.5–2.5 m, respectively, but the general content of uranium in the studied environment was close to the values characterizing continental run-off. The results obtained for the White Sea sediments were compared with the sediment of the Black Sea, formed in the anoxic conditions of hydrogen sulfide contamination. In these conditions, the uranium content varied from 10 to 20 ppm. The obtained data were interpreted using thermodynamic modeling of the uranium forms in the seawater at different pH and Eh. This study demonstrated that the change of redox conditions from oxidizing to reducing leads to increased uranium content due to a decrease in uranium’s solubility in water. These results show that oxidation–reduction potential could be one of the most important factors controlling uranium content in black shales formed in the marine environment

    Uranium in Source Rocks: Role of Redox Conditions and Correlation with Productivity in the Example of the Bazhenov Formation

    No full text
    The paper reports comprehensive analysis of different factors affecting uranium content in oil source rocks and the relationship between uranium content and productivity of source rocks. The analysis of data for 13 wells of the Bazhenov Formation (Western Siberia, Russia) was carried out. The uranium content of the rocks was measured by gamma-ray spectrometry on core samples. In order to analyze factors affecting uranium accumulation in source rocks, we studied content and characteristics of organic matter (Rock-Eval pyrolysis), and also mineral, element, and isotope composition of rocks. We have shown that redox conditions at the sedimentation stage have the most pronounced impact on the uranium accumulation in the rocks of the Bazhenov Formation. It was also shown that productive intervals, containing increased amounts of mobile hydrocarbons, are characterized by low (<20 ppm) concentration of uranium. However, the intervals, containing phosphorite minerals may show better reservoir properties and oil saturation at higher concentration of uranium. The analysis of correlations and relationships between uranium content and Rock-Eval pyrolysis indexes (oil saturation index and productivity index) enabled formulation of criteria for selection of oil-saturated intervals using the spectral gamma and pulsed neutron spectroscopy log data

    Investigation of Source Rock Heating and Structural Changes in the Electromagnetic Fields Using Experimental and Mathematical Modeling

    No full text
    The paper presents the results of an experimental study of heating and the structural resultant changes of source rocks under the influence of the electromagnetic field in the microwave and radio-frequency ranges. The samples from the Bazhenov Formation (West Siberia, Russia) and the Domanic Formation (Ural, Russia) have been tested. It is shown that samples from these formations demonstrate very different heating rates at the same electromagnetic field parameters and the their heating rate depends on the type of the electromagnetic field (radio-frequency or microwave) applied. The temperature of the Bazhenov Formation samples reaches 300 °C within one hundred seconds of the microwave treatment but it slowly rises to 200 °C after twelve minutes of the radio-frequency influence. The samples of the carbonate Domanic Formation heat up more slowly in the microwave field (within two hundred seconds) and to lower temperatures in the radio-frequency (150 °C) than the Bazhenov Formation samples. The study of the structure of the samples before and after experiments on the electromagnetic treatment shows fracture formation during the heating process. Numerical simulations of heating dynamics of source rock samples have been based on a simple mathematical model of the electromagnetic influence and main features of heating for different types of source rock have been revealed. The opportunities for application of electromagnetic heating for oil source rock recovery are discussed

    Alterations of Carbonate Mineral Matrix and Kerogen Micro-Structure in Domanik Organic-Rich Shale during Anhydrous Pyrolysis

    No full text
    The study of organic-rich carbonate-containing shales after heating is an important task for the effective application of in-situ thermal kerogen conversion technologies implemented for these types of rocks. This research was conducted to study changes in the rocks of the Domanik Formation after high-temperature treatment, taking into account the nature of structural changes at the micro level and chemical transformations in minerals. The sample of organic-rich carbonate-containing shales of the Domanik Formation was treated in stages in a pyrolizer in an inert atmosphere in the temperature range of 350–800 °C for 30 min at each temperature. By means of X-ray powder diffractometry (XRPD), HAWK pyrolysis, light and scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and computed micro-tomography, the characteristics of the rock before and after each heating stage were studied. The results showed significant alteration of the mineral matrix in the temperature range 600–800 °C, including the decomposition of minerals with the formation of new components, and structural alterations such as fracturing micropore formation. The organic matter (OM) was compacted at T = 350–400 °C and fractured. The evolution of void space includes fracture formation at the edges between rock components, both in organic matter and in minerals, as well as nanopore formation inside the carbonate mineral matrix. The results obtained show what processes at the microlevel can occur in carbonate-containing organic-rich shales under high-temperature treatment, and how these processes affect changes in the microstructure and pore space in the sample. These results are essential for modeling and the effective application of thermal EOR in organic-rich shales

    Alterations of Carbonate Mineral Matrix and Kerogen Micro-Structure in Domanik Organic-Rich Shale during Anhydrous Pyrolysis

    No full text
    The study of organic-rich carbonate-containing shales after heating is an important task for the effective application of in-situ thermal kerogen conversion technologies implemented for these types of rocks. This research was conducted to study changes in the rocks of the Domanik Formation after high-temperature treatment, taking into account the nature of structural changes at the micro level and chemical transformations in minerals. The sample of organic-rich carbonate-containing shales of the Domanik Formation was treated in stages in a pyrolizer in an inert atmosphere in the temperature range of 350–800 °C for 30 min at each temperature. By means of X-ray powder diffractometry (XRPD), HAWK pyrolysis, light and scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and computed micro-tomography, the characteristics of the rock before and after each heating stage were studied. The results showed significant alteration of the mineral matrix in the temperature range 600–800 °C, including the decomposition of minerals with the formation of new components, and structural alterations such as fracturing micropore formation. The organic matter (OM) was compacted at T = 350–400 °C and fractured. The evolution of void space includes fracture formation at the edges between rock components, both in organic matter and in minerals, as well as nanopore formation inside the carbonate mineral matrix. The results obtained show what processes at the microlevel can occur in carbonate-containing organic-rich shales under high-temperature treatment, and how these processes affect changes in the microstructure and pore space in the sample. These results are essential for modeling and the effective application of thermal EOR in organic-rich shales

    Formation of Gas-Emission Craters in Northern West Siberia: Shallow Controls

    No full text
    Gas-emission craters discovered in northern West Siberia may arise under a specific combination of shallow and deep-seated permafrost conditions. A formation model for such craters is suggested based on cryological and geological data from the Yamal Peninsula, where shallow permafrost encloses thick ground ice and lenses of intra- and subpermafrost saline cold water (cryopegs). Additionally, the permafrost in the area is highly saturated with gas and stores large accumulations of hydrocarbons that release gas-water fluids rising to the surface through faulted and fractured crusts. Gas emission craters in the Arctic can form in the presence of gas-filled cavities in ground ice caused by climate warming, rich sources of gas that can migrate and accumulate under pressure in the cavities, intrapermafrost gas-water fluids that circulate more rapidly in degrading permafrost, or weak permafrost caps over gas pools

    Conceptual Models of Gas Accumulation in the Shallow Permafrost of Northern West Siberia and Conditions for Explosive Gas Emissions

    No full text
    Gas accumulation and pressurized unfrozen rocks under lakes (sublake taliks) subject to freezing in shallow permafrost may lead to explosive gas emissions and the formation of craters. Gas inputs into taliks may have several sources: microbially-mediated recycling of organic matter, dissociation of intrapermafrost gas hydrates, and migration of subpermafrost and deep gases through permeable zones in a deformed crust. The cryogenic concentration of gas increases the pore pressure in the freezing gas-saturated talik. The gradual pressure buildup within the confined talik causes creep (ductile) deformation of the overlying permafrost and produces a mound on the surface. As the pore pressure in the freezing talik surpasses the permafrost strength, the gas-water-soil mixture of the talik erupts explosively and a crater forms where the mound was. The critical pressure in the confined gas-saturated talik (2–2.5 MPa for methane) corresponds to the onset of gas hydrate formation. The conditions of gas accumulation and excess pressure in freezing closed taliks in shallow permafrost, which may be responsible for explosive gas emissions and the formation of craters, are described by several models

    Advanced Determination of Heat Flow Density on an Example of a West Russian Oil Field

    No full text
    Reliable geothermal data are required for basin and petroleum system modeling. The essential shortcomings of the methods and results of previous geothermal investigations lead to a necessity to reappraise the data on the thermal properties and heat flow. A new, advanced experimental basis was used to provide reliable data on vertical variations in the thermal properties of formation and heat flow for the area surrounding a prospecting borehole drilled through an unconventional hydrocarbon reservoir of the Domanik Formation in the Orenburg region (Russia). Temperature logging was conducted 12.5 months after well drilling. The thermal properties of the rocks were measured with continuous thermal core profiling on all 1699 recovered core samples. Within non-cored intervals, the thermal conductivity of the rocks was determined from well-logging data. The influence of core aging, multiscale heterogeneity and anisotropy, in situ pressure and temperature on the thermal properties of rock was accounted for. The terrestrial heat flow was determined to be 72.6 ± 2.2 mW·m−2—~114% larger than the published average data for the studied area. The experiment presents the first experience of supporting basin modeling in unconventional plays with advanced experimental geothermal investigations
    corecore