Numerical stabilization of the Stokes problem in vorticity–velocity–pressure formulation

We work on a vorticity, velocity and pressure formulation of the bidimensional Stokes problem for incompressible fluids. In previous papers, the authors have developed a natural implementation of this scheme. We have then observed that, in case of unstructured meshes with Dirichlet boundary conditions on the velocity, the convergence is not optimal. In this paper, we propose to add ‘‘bubble’’ velocity functions with compact support along the boundary to improve convergence. We then prove a convergence theorem and illustrate by numerical results better behaviour of the scheme in general cases

Adaptive mesh refinements for thin shells whose middle surface is not exactly known

A strategy concerning mesh refinements for thin shells computation is presented. The geometry of the shell is given only by the reduced information consisting in nodes and normals on its middle surface corresponding to a coarse mesh. The new point is that the mesh refinements are defined from several criteria, including the transverse shear forces which do not appear in the mechanical energy of the applied shell formulation. Another important point is to be able to construct the unknown middle surface at each step of the refinement. For this, an interpolation method by edges, coupled with a triangle bisection algorithm, is applied. This strategy is illustrated on various geometries and mechanical problems

A coupled parametric and nonparametric approach for modal analysis of a satellite

This study takes place in the context of dynamical prediction for satellite structures. Aims of such studies are to survey the dynamical response of satellite equipment and components, to check that requirements are correct and to give prediction of vibration levels, which are inputs for the experimental test validation according to the launcher specification. This prediction is done by modal analysis performed on a numerical model built by finite element method. Uncertainties on equipment and components properties lead to random frequency response function (FRF). This paper aims at understanding how modal approach can be adapted to probabilistic framework in order to calculate cumulative density function or, at least, some quantiles of a FRF. Starting point of deterministic modal analysis is the study of a single degree of freedom (DOF) system. C. Heinkelé analytically expresses the probability density function (PDF) of the FRF of an oscillator with a random natural pulsation following a uniform law. We have generalized this work to random natural pulsation following a law of finite variance. Then, the expression of a FRF between two DOF of the structure is a linear function of random oscillators FRF and DOF components of random eigenvectors. Assuming that random eigenvectors are close to their means, we have access to the characteristic function of the random FRF between two DOF as a multi-dimensional integral with respect to the joint PDF of the oscillators FRF. This paper mainly focuses on two major points which are calculation of oscillators joint PDF and inversion of characteristic functions. The first one is tackled by copulas theory. Dependence structure of random eigenvalues are identified and modeled by a copula. Then we apply results on copulas transformations to obtain joint PDF of oscillators FRF. Classical results concern monotonic transformations but we extended these ones to non-monotonic cases. Concerning inversion of characteristic function, several methods are studied to numerically compute the Gil-Pelaez formula. This approach allows to access some FRF quantiles by numerical integration which error can be controlled. Moreover, an interesting point is the flexibility in the identification of the random eigenvalues PDF. This is especially interesting in order to couple parametric identification with nonparametric one, when only few dispersion informations are given for equipments, housed in the satellite primary structure

Vibro-impact of a plate on rigid obstacles: existence theorem, convergence of a scheme and numerical simulations

The purpose of this paper is to describe a fully discrete approximation and its convergence to the continuum dynamical impact problem for the fourth-order Kirchhoff–Love plate model with nonpenetration Signorini contact condition. We extend to the case of plates the theoretical results of weak convergence due to Y. Dumont and L. Paoli, which was stated for Euler–Bernouilli beams. In particular, this provides an existence result for the solution of this problem. Finally, we discuss the numerical results we obtain

A new adaptive response surface method for reliability analysis

Response surface method is a convenient tool to assess reliability for a wide range of structural mechanical problems. More specifically, adaptive schemes which consist in iteratively refine the experimental design close to the limit state have received much attention. However, it is generally difficult to take into account a lot of variables and to well handle approximation error. The method, proposed in this paper, addresses these points using sparse response surface and a relevant criterion for results accuracy. For this purpose, a response surface is built from an initial Latin Hypercube Sampling (LHS) where the most significant terms are chosen from statistical criteria and cross-validation method. At each step, LHS is refined in a region of interest defined with respect to an importance level on probability density in the design point. Two convergence criteria are used in the procedure: The first one concerns localization of the region and the second one the response surface quality. Finally, a bootstrap method is used to determine the influence of the response error on the estimated probability of failure. This method is applied to several examples and results are discussed

Coupling Harmonic Functions-Finite Elements for Solving the Stream Function-Vorticity Stokes Problem

We consider the bidimensional Stokes problem for incompressible fluids in stream function-vorticity form. The classical finite element method of degree one usually used does not allow the vorticity on the boundary of the domain to be computed satisfactorily when the meshes are unstructured and does not converge optimally. To better approach the vorticity along the boundary, we propose that harmonic functions obtained by integral representation be used. Numerical results are very satisfactory, and we prove that this new numerical scheme leads to an optimal convergence rate of order 1 for the natural norm of the vorticity and, under higher regularity assumptions, from 3/2 to 2 for the quadratic norm of the vorticity

A localization and updating strategy of large finite element models in structural dynamics

The purpose of this paper is to evaluate the application of the error of constitutive law method to the updating of large FE models of space structures using FRF experimental results. First, we briefly recall the theoretical basis of this method in modal and frequency approaches. Then, the notion of visibility is introduced to improve the modelling of localization error and the quality of modal updating, for low frequencies. Finally we propose a global strategy and discuss the results we obtained on satellite JASON2

Modelling aeronautical composite laminates behaviour under impact using a saturation damage and delamination continuous material model

We show that the behavior of T700/M21s and T800/M21s composite panels are affected by the influence of strain rates together with local shear and crush punch or global flexural strengths of the structure. A deterministic continuous composite material model has been developed as a LS-DYNA user defined material model for unidirectional composites on the basis of the Matzenmiller model widely used for woven composites. Initiation and evolution up to saturation and fracture are implemented for various and coupled damage mechanisms including delamination. Quasi-static and dynamic characterization tests laminates have been carried out on balanced angle ply [±θ] and used for calibration of numerical values. Impact induced damage from experiment's measures and numerical predictions are compared for T800/M21S aeronautical samples impacted at 15J

Économie du document scientifique - Pour des archithécaires

Entre l'adaptation rapide des éditeurs au numérique, la popularité du libre accès et les hésitations des chercheurs, l'explosion du Web 2.0, l'économie du don et l'insolente vitalité des moteurs, une économie de l'édition numérique scientifique se reconfigure. Les institutions documentaires doivent, de leur côté, renouveler leur positionnement et repenser leurs savoir-faire

Web, texte, conversation et redocumentarisation

Conférencier invité - Keynote SpeakerLes moteurs de recherche utilisent principalement des outils linguistiques et statistiques et considèrent implicitement la toile comme le vaste texte d’une conversation mondiale et ininterrompue. Le Web remet en cause l’ordre documentaire comme un nouveau média s’installant sans ménagement parmi les anciens. Un processus de redocumentarisation est en cours. Les linguistes dans leurs travaux s’appuient généralement sur l’ordre documentaire ancien, même avec des outils nouveaux. Ils ont pourtant une responsabilité particulière pour définir ce nouvel ordre.Search engines mainly use linguistic and statistic tools and implicitly regard the Web as a large, global and permanent talk. The Web disturbs the traditional order of documents like a new media taking its place between old ones. A process of redocumentarization is currently taking place. Usually even with new tools, linguists work within the old world of documents. However, they have a special responsibility in building the new one