10,092 research outputs found

    The Effect of Slow Two‐Electron Transfers and Disproportionation on Cyclic Voltammograms

    Get PDF
    The EE mechanism (two‐electron transfer) for cyclic voltammetry was investigated in considerable detail along with the effect of disproportionation. The theory was developed for either the first or second electron transfer being slow while the other one was reversible. It was possible to develop generalized working curves for the height and shape of the wave regardless of the difference in Eo\u27s and the values of α and Ks. This theory was then applied to the analysis of the reduction of benzil in the presence of alkaline earth ions in dimethylformamide

    The Electrochemical Oxidation of Organic Selenides and Selenoxides

    Get PDF
    The electrochemical oxidation of alkyl and aryl selenides was investigated in acetonitrile. The oxidation of diphenyl selenide and di(4‐methylphenyl) selenide led primarily to the formation of their respective selenoxides, which were identified by exhaustive coulometric oxidation and and analysis of the products. The selenoxide itself was not observed in the cyclic voltammetry of the selenide for two reasons: first, the protonation of the selenoxide by the acid formed from the reaction of water with the cation radical and second, the formation of a selenoxide hydrate. The formation of the hydrate with diphenyl selenoxide was verified by isolation of the dimethoxy derivative. In addition to the selenoxide, selenonium compounds, formed by the coupling of the oxidized material, were also observed. The alkyl selenides were generally oxidized at a lower potential than the aryl selenides. This trend is different from the sulfur analogues, where the aryl sulfides are easier to oxidize than their alkyl counterparts. As a result, the difference in their redox potentials is relatively small. These differences may occur because the oxidation of aryl sulfides is more likely to take place on the aromatic ring, which leads to a greater yield of the coupled products (about 100%) when compared to the selenide analogue

    Electrochemistry and spectroelectrochemistry of iron porphyrins in the presence of nitrite

    Get PDF
    The reaction of nitrite with ferric and ferrous porphyrins was examined using visible, infrared and NMR spectroscopy. Solutions of either ferric or ferrous porphyrin were stable in the presence of nitrite, with only complexation reactions being observed. Under voltammetric conditions, though, a rapid reaction between nitrite and iron porphyrins was observed to form the nitrosyl complex, Fe(p)(NO), where Pporphyrins. The products of the reduction of ferric porphyrins in the presence of nitrite were confirmed by visible spectroelectrochemistry to be Fe(P)(NO) and [Fe(P)]2O. Visible, NMR and infrared spectroscopy were used to rule out the formation of Fe(P)(NO) by the iron-catalyzed disproportionation of nitrite. A reaction between iron porphyrins and nitrite only occurred by the presence of both oxidation states (ferric:ferrous). The kinetics of the reaction were monitored by visible spectroscopy, and the reaction was found to be first-order with respect to Fe(OEP)(Cl) and Fe(OEP). The products were the same as those observed in the spectroelectrochemical experiment. The rate was not strongly dependent upon the concentration of nitrite, indicating that the coordinated, not the free nitrite, was the reaction species. The kinetics observed were consistent with a mixed oxidation state nitrite-bridged intermediate, which carried out the oxygen transfer reaction from nitrite to the iron porphyrin. The effect of nitrite coordination on the reaction rate was examined. Š 2001 Elsevier Science B.V. All rights reserved

    Far-infrared spectroelectrochemistry: a study of linear molybdenum/iron/sulfur clusters

    Get PDF
    The far-infrared spectroelectrochemistry of linear M/Fe/S (M=Mo, W) complexes was investigated in methylene chloride and dichloroethane. With CsI as spectral windows, bands above 200 cm−1 can be observed in methylene chloride, except for a weak methylene chloride band at 450 cm−1. Substitution of dichloroethane for methylene chloride, solvents of nearly identical electrochemical properties, allows one to observe solute bands in the 450-cm−1 region. The far-infrared spectroelectrochemistry of [MoFe2S4Cl4]2− and its tungsten analogue was investigated. The disappearance of the oxidation bands and the appearance of bands due to the reduced product could be clearly observed. The origin of the vibrational bands could be clearly identified using 34S-substituted complexes. In addition to the far-infrared bands, the resonance Raman spectroelectrochemistry of the oxidized and reduced complex, along with the 34S-substituted complexes was obtained. Far-infrared and resonance Raman spectroelectrochemistry can be combined to understand the electrochemical mechanism of transition metal complexes. The far-infrared spectroelectrochemistry of [MoFe2S4Cl4]2− and its tungsten analogue was investigated. The disappearance of the initial bands and the appearance of bands due to the reduced product could be clearly observed. Resonance Raman spectroscopy and the use of 34S-substituted complexes were used for characterization of the reactant and products

    Influence of RTIL Nanodomains on the Voltammetry and Spectroelectrochemistry Of Fullerene C\u3csub\u3e60\u3c/sub\u3e in Benzonitrile/Room Temperature Ionic Liquids Mixtures

    Get PDF
    The cyclic voltammetry of fullerene C60 was examined in mixed benzonitrile/RTIL solvents in order to probe the effect of nanodomains in the mixed RTIL/benzonitrile solutions and their effect upon the voltammetry. In probing the interactions of the fullerides (up to C603−) with RTILs, BMIm+ (1-butyl-3-methylimidazolium, mostly planar) and tetraalkylammonium (more spherical/flexible) salts were used. In order to investigate these shifts in more detail, the ΔE12° (=E°1–E°2) and ΔE23° (=E°2–E°3) values, which were independent of the reference potential, were used. At higher concentrations of the RTILs, greater stabilization of the more highly charged fullerides were observed. These shifts were attributed to the interaction of the fullerides with nanodomains of the RTIL. This was further confirmed by examining the shifts in the E1/2 values of non-RTIL and RTIL salts at constant ionic strength and the changes in diffusion coefficient with %RTIL. The observed shifts in the E1/2 values with increased concentration of the RTIL salts could not be explained by ion pairing equilibria alone. Changes in the visible and near infrared spectra between benzonitrile and mixed benzonitrile/RTIL spectra were most significant for C603−, where voltammetric evidence indicates the strongest interaction between the fullerides and the RTIL. Among the RTILs studied, preliminary DFT calculations showed that the more flexible tetraalkylammonium ion was able to stabilize the C60-anionic species better than the planar BMIm+ species, under similar solution conditions

    Visible and Infrared Spectroelectrochemistry of Cobalt Porphinones and Porphinediones

    Get PDF
    The visible and infrared spectroelectrochemistry of the redox chemistry of CoII–porphinone complexes were examined and compared with similar studies of the respective iron complexes. Cobalt(II) porphinone complexes undergo a one-electron reduction and two one-electron oxidations within the potential region that was studied in this work. The one electron spectroelectrochemical reduction of CoII(P) (P = octaethylporphyrin (OEP), octaethylporphinone (OEPone), and octaethylporphinedione (OEPdione)) were studied using visible spectroscopy, and their cobalt(I) complexes were characterized. The same reduction was examined by FTIR spectroscopy for P = OEPone and OEPdione. The infrared spectra showed downshifts of the νCO band that were consistent with a cobalt(I) complex and were similar to the iron(I) complex. The two one-electron oxidations of CoII(OEPone) and CoII(OEPdione) were also carried out using visible and infrared spectroelectrochemistry. The νCO band for cobalt was less sensitive to the metal oxidation state (III vs. II) than was observed in the iron complexes. Additional upshifts in the νCO band were observed for the π-cation radical. Isotopic 18O substitution on the carbonyl group of the H2OEPone was done in order to determine the degree of mixing up the porphinone modes with the carbonyl vibrations

    Electrochemistry and Spectroelectrochemistry of 1,4-Dinitrobenzene in Acetonitrile and Room-Temperature Ionic Liquids: Ion-Pairing Effects in Mixed Solvents

    Get PDF
    Room-temperature ionic liquids (RTILs) have been shown to have a significant effect on the redox potentials of compounds such as 1,4-dinitrobenzene (DNB), which can be reduced in two one-electron steps. The most noticeable effect is that the two one-electron waves in acetonitrile collapsed to a single two-electron wave in a RTIL such as butylmethyl imidazolium-BF4 (BMImBF4). In order to probe this effect over a wider range of mixed-molecular-solvent/RTIL solutions, the reduction process was studied using UV–vis spectroelectrochemistry. With the use of spectroelectrochemistry, it was possible to calculate readily the difference in E°’s between the first and second electron transfer (ΔE12° = E1° – E2°) even when the two one-electron waves collapsed into a single two-electron wave. The spectra of the radical anion and dianion in BMImPF6 were obtained using evolving factor analysis (EFA). Using these spectra, the concentrations of DNB, DNB–•, and DNB2– were calculated, and from these concentrations, the ΔE12° values were calculated. Significant differences were observed when the bis(trifluoromethylsulfonyl)imide (NTf2) anion replaced the PF6– anion, leading to an irreversible reduction of DNB in BMImNTf2. The results were consistent with the protonation of DNB2–, most likely by an ion pair between DNB2– and BMIm+, which has been proposed by Minami and Fry. The differences in reactivity between the PF6– and NTf2– ionic liquids were interpreted in terms of the tight versus loose ion pairing in RTILs. The results indicated that nanostructural domains of RTILs were present in a mixed-solvent system

    Spectroscopic Evidence of Nanodomains in THF/RTIL Mixtures: Spectroelectrochemical and Voltammetric Study of Nickel Porphyrins

    Get PDF
    The presence and effect of RTIL nanodomains in molecular solvent/RTIL mixture were investigated by studying the spectroelectrochemistry and voltammetry of nickel octaethylporphyrin (Ni(OEP)) and nickel octaethylporphinone (Ni(OEPone)). Two oxidation and 2–3 reduction redox couples were observed, and the UV–visible spectra of all stable products in THF and RTIL mixtures were obtained. The E° values for the reduction couples that were studied were linearly correlated with the Gutmann acceptor number, as well as the difference in the E° values between the first two waves (ΔE12° = |E1° – E2°|). The ΔE12° for the reduction was much more sensitive to the %RTIL in the mixture than the oxidation, indicating a strong interaction between the RTIL and the anion or dianion. The shifts in the E° values were significantly different between Ni(OEP) and Ni(OEPone). For Ni(OEP), the E1° values were less sensitive to the %RTIL than were observed for Ni(OEPone). Variations in the diffusion coefficients of Ni(OEP) and Ni(OEPone) as a function of %RTIL were also investigated, and the results were interpreted in terms of RTIL nanodomains. To observe the effect of solvation on the metalloporphyrin, Ni(OEPone) was chosen because it contains a carbonyl group that can be easily observed in infrared spectroelectrochemistry. It was found that the νCO band was very sensitive to the solvent environment, and two carbonyl bands were observed for Ni(OEPone)− in mixed THF/RTIL solutions. The higher energy band was attributed to the reduced product in THF, and the lower energy band attributed to the reduced product in the RTIL nanophase. The second band could be observed with as little as 5% of the RTIL. No partitioning of Ni(OEPone)+ into the RTIL nanodomain was observed. DFT calculations were carried out to characterize the product of the first reduction. These results provide strong direct evidence of the presence of nanodomains in molecular solvent/RTIL mixtures

    Electrochemistry and Spectroscopy of Sulfate and Thiosulfate Complexes of Iron Porphyrins

    Get PDF
    The electrochemical and spectroscopic properties of the complex formed by the addition of thiosulfate to ferric porphyrins were examined. The NMR spectrum of the thiosulfate–ferric porphyrin complex was consistent with a high-spin ferric complex, while the EPR spectrum at liquid nitrogen temperatures indicated that the complex under these conditions was low-spin. Such behavior has been previously observed for other ferric porphyrin complexes. The visible spectra were characterized by a shift in the Soret band to higher energies, with smaller changes in the longer wavelength region. The complex was reasonably stable in DMF, but slowly reduced over several hours to FeII(TPP) and S4O6 2−. The voltammetric behavior of the thiosulfate complex in DMF consists of two waves, the first of which was irreversible. The ferric/ferrous reduction in the presence of thiosulfate was shifted negatively about 400 mV, compared to the Fe(TPP)(Cl) reduction. The visible, NMR and EPR spectra were most consistent with a Fe–S bonded ferric porphyrin–thiosulfate complex, Fe(P)(SSO3)−. The kinetics of the reduction of ferric porphyrin by thiosulfate in DMSO indicated an autocatalytic mechanism, where the first step is the formation of the catalyst. The identity of the catalyst could not be determined because it must be present at low concentrations, but it is formed from the reaction of the ferric complex with thiosulfate. Coordination of thiosulfate to the porphyrin was not necessary for the reduction to occur, and the reduction of Fe(TPP)(Cl) by thiosulfate was accelerated by the addition of sulfate. Under these conditions, sulfate had replaced thiosulfate as the axial ligand for the ferric porphyrin. In the presence of sulfate, the reduction occurred in a single kinetic pseudo-first order step. The voltammetry, spectroelectrochemistry and kinetics for the reaction of thiosulfate with ferric porphyrins were examined. A rapid reaction between ferric porphyrins and thiosulfate was observed in DMF. The reaction was complex, involving the formation of a catalytic intermediate. Window factor analysis and multivariate curve resolution were used to deconvolute the kinetic data

    Insight into Solvent Coordination of an Iron Porphyrin Hydroxylamine Complex from Spectroscopy and DFT Calculations

    Get PDF
    The reduction of Fe(OEP)(NO) in the presence of substituted phenols leads to a three‐electron reduction to form Fe(OEP)(NH2OH), which has been characterized by visible spectroscopy and electron stoichiometry. In this work, we have further characterized this species using infrared and 1H NMR spectroscopy, along with DFT calculations. The infrared bands in the 3400–3600 cm–1 region, due to hydroxylamine, were significantly downshifted to the 2500–2700 cm–1 region when 4‐[D1]chlorophenol replaced the normal abundance acid. Using 1H NMR spectroscopy, the hydroxylamine and the meso‐protons were identified. From DFT calculations, the 1H NMR spectra were most consistent with a six‐coordinate complex, Fe(OEP)(NH2OH)(THF)
    • …
    corecore