Realization of a twin beam source based on four-wave mixing in Cesium

Four-wave mixing (4WM) is a known source of intense non-classical twin beams. It can be generated when an intense laser beam (the pump) and a weak laser beam (the seed) overlap in a $\chi^{(3)}$ medium (here cesium vapor), with frequencies close to resonance with atomic transitions. The twin beams generated by 4WM have frequencies naturally close to atomic transitions, and can be intense (gain $\gg 1$) even in the CW pump regime, which is not the case for PDC $\chi^{(2)}$ phenomenon in non-linear crystals. So, 4WM is well suited for atom-light interaction and atom-based quantum protocols. Here we present the first realization of a source of 4-wave mixing exploiting $D_2$ line of Cesium atoms.Comment: 10 pages, 10 figure

Frequency-doubled Laser System at 780 nm for Pulsed Vapor-cell Clocks

We present the development status of a low-noise pulsed laser source suitable for high-performing vapor-cell clocks. The laser is based on a 1560 nm source, frequency doubled to be resonant with the D-2 line of rubidium at 780 nm. The laser system is able to deliver laser pulses with programmable amplitude and length. The intensity noise of the laser during the pulses duration is also actively reduced by means of the same fast analog control loop generating the pulses. The pulses characteristics are shown to be compatible with the specifications of a high-performing Pulsed Optically Pumped (POP) clock

Recent Results on a Rb Pulsed Optically Pumped Clock for Space Applications

We report on the recent characterization of a Rb microwave clock based on the pulsed optical pumping (POP) principle. The clock is developed in the frame of a INRIM-Leonardo collaboration intended to implement a highly stable and compact device for space applications. The physics package developed by Leonardo S.p.A. includes space-graded components, weights less than 4 kg and occupies only a 4-liters volume. It has been characterized with custom optics and electronics developed at INRIM laboratories. By taking advantage of advanced stabilization techniques for the laser and microwave pulses, this arrangement exhibits state-of-the-art short- and mid-term stability, reaching σ y (40000s) = 6×10 −16 (drift removed) for a 200000s run

Direct Measurement of Laser Noise Spectrum with a Frequency-to-Voltage Converter

The stability performance of laser-pumped Rb-cell atomic clocks is affected by the laser spectral characteristics. It is then important to investigate the laser spectrum, especially since laser noise measurements are rarely found in the literature. We present a frequency-noise power spectrum characterization of a laser diode currently employed in a high-performing Rb clock. The measurement is performed by using a narrow-linewidth reference laser. The beatnote between the two sources is processed with a custom frequency-to-voltage (f/V) converter whose output is finally digitized with an FFT spectrum analyzer

A pulsed-Laser Rb atomic frequency standard for GNSS applications

We present the results of 10 years of research related to the development of a Rubidium vapor cell clock based on the principle of pulsed optical pumping (POP). Since in the pulsed approach, the clock operation phases take place at different times, this technique demonstrated to be very effective in curing several issues affecting traditional Rb clocks working in a continuous regime, like light shift, with a consequent improvement of the frequency stability performances. We describe two laboratory prototypes of POP clock, both developed at INRIM. The first one achieved the best results in terms of frequency stability: an Allan deviation of σy(τ) = 1.7 × 10−13 τ−1/2, being τ the averaging time, has been measured. In the prospect of a space application, we show preliminary results obtained with a second more recent prototype based on a loaded cavity-cell arrangement. This clock has a reduced size and exhibited an Allan deviation of σy(τ) = 6 × 10−13 τ−1/2, still a remarkable result for a vapor cell device. In parallel, an ongoing activity performed in collaboration with Leonardo S.p.A. and aimed at developing an engineered space prototype of the POP clock is finally mentioned. Possible issues related to space implementation are also briefly discussed. On the basis of the achieved results, the POP clock represents a promising technology for future GNSSs

Beyond the fundamental noise limit in coherent optical fiber links

It is well known that temperature variations and acoustic noise affect ultrastable frequency dissemination along optical fiber. Active stabilization techniques are in general adopted to compensate for the fiber-induced phase noise. However, despite this compensation, the ultimate link performances remain limited by the so called delay-unsuppressed fiber noise that is related to the propagation delay of the light in the fiber. In this paper, we demonstrate a data post-processing approach which enables us to overcome this limit. We implement a subtraction algorithm between the optical signal delivered at the remote link end and the round-trip signal. In this way, a 6 dB improvement beyond the fundamental limit imposed by delay-unsuppressed noise is obtained. This result enhances the resolution of possible comparisons between remote optical clocks by a factor of 2. We confirm the theoretical prediction with experimental data obtained on a 47 km metropolitan fiber link, and propose how to extend this method for frequency dissemination purposes as well

Metrological characterization of the pulsed Rb clock with optical detection

We report on the implementation and the metrological characterization of a vapor-cell Rb frequency standard working in pulsed regime. The three main parts that compose the clock, physics package, optics and electronics, are described in detail in the paper. The prototype is designed and optimized to detect the clock transition in the optical domain. Specifically, the reference atomic transition, excited with a Ramsey scheme, is detected by observing the interference pattern on a laser absorption signal. \ The metrological analysis includes the observation and characterization of the clock signal and the measurement of frequency stability and drift. In terms of Allan deviation, the measured frequency stability results as low as $1.7\times 10^{-13} \ \tau^{-1/2}$, $\tau$ being the averaging time, and reaches the value of few units of $10^{-15}$ for $\tau=10^{4}$ s, an unprecedent achievement for a vapor cell clock. We discuss in the paper the physical effects leading to this result with particular care to laser and microwave noises transferred to the clock signal. The frequency drift, probably related to the temperature, stays below $10^{-14}$ per day, and no evidence of flicker floor is observed. \ We also mention some possible improvements that in principle would lead to a clock stability below the $10^{-13}$ level at 1 s and to a drift of few units of $10^{-15}$ per day