58 research outputs found

    Several New Active Galactic Nuclei Among X-ray Sources Detected by INTEGRAL and SWIFT Observatories

    Get PDF
    We present the results of the optical identifications of a set of X-ray sources from the all-sky surveys of INTEGRAL and SWIFT observatories. Optical data were obtained with Russian-Turkish 1.5-m Telescope (RTT150). Nine X-ray sources were identified as active galactic nuclei (AGNs). Two of them are hosted by nearby, nearly exactly edge-on, spiral galaxies MCG -01-05-047 and NGC 973. One source, IGR J16562-3301, is most probably BL Lac object (blazar). Other AGNs are observed as stellar-like nuclei of spiral galaxies, with broad emission lines in their spectra. For the majority of our hard X-ray selected AGNs, their hard X-ray luminosities are well-correlated with the luminosities in [OIII],5007 optical emission line. However, the luminosities of some AGNs deviate from this correlation. The fraction of these objects can be as high as 20%. In particular, the flux in [OIII] line turns to be lower in two nearby edge-on spiral galaxies, which can be explained by the extinction in their galactic disks.Comment: 9 pages, 3 figures, accepted for publication in Astronomy Letters, the original text in Russian can be found at http://hea.iki.rssi.ru/~rodion/poptid.pd

    Sensitivity and Insensitivity of Galaxy Cluster Surveys to New Physics

    Full text link
    We study the implications and limitations of galaxy cluster surveys for constraining models of particle physics and gravity beyond the Standard Model. Flux limited cluster counts probe the history of large scale structure formation in the universe, and as such provide useful constraints on cosmological parameters. As a result of uncertainties in some aspects of cluster dynamics, cluster surveys are currently more useful for analyzing physics that would affect the formation of structure than physics that would modify the appearance of clusters. As an example we consider the Lambda-CDM cosmology and dimming mechanisms, such as photon-axion mixing.Comment: 24 pages, 8 eps figures. References added, discussion of scatter in relations between cluster observables lengthene

    The 400 square degrees ROSAT PSPC galaxy cluster survey: Catalog and statistical calibration

    Get PDF
    We present a catalog of galaxy clusters detected in a new ROSAT PSPC survey. The survey is optimized to sample, at high redshifts, the mass range corresponding to T> keV clusters at z=0. Technically, our survey is the extension of the 160 square degrees survey (Vikhlinin etal 98a, Mullis etal 2003). We use the same detection algorithm, thus preserving high quality of the resulting sample; the main difference is a significant increase in sky coverage. The new survey covers 397 square degrees and is based on 1610 high Galactic latitude ROSAT PSPC pointings, virtually all pointed ROSAT data suitable for the detection of distant clusters. The search volume for X-ray luminous clusters within z<1 exceeds that of the entire local Universe (z<0.1). We detected 287 extended X-ray sources with fluxes f>1.4e-13 erg/s/cm^2 in the 0.5-2 keV energy band, of which 266 (93%) are optically confirmed as galaxy clusters, groups or individual elliptical galaxies. This paper provides a description of the input data, the statistical calibration of the survey via Monte-Carlo simulations, and the catalog of detected clusters. We also compare the basic results to those from previous, smaller area surveys and find good agreement for the log N - log S distribution and the local X-ray luminosity function. Our sample clearly shows a decrease in the number density for the most luminous clusters at z>0.3. The comparison of our ROSAT-derived fluxes with the accurate Chandra measurements for a subset of high-redshift clusters demonstrates the validity of the 400 square degree survey's statistical calibration.Comment: Submitted to ApJS. 21 pages using emulateapj. More information ans survey data tables are available at http://hea-www.harvard.edu/400d and http://hea.iki.rssi.ru/400

    Vertical Structure of the Outer Accretion Disk in Persistent Low-Mass X-Ray Binaries

    Get PDF
    We have investigated the influence of X-ray irradiation on the vertical structure of the outer accretion disk in low-mass X-ray binaries by performing a self-consistent calculation of the vertical structure and X-ray radiation transfer in the disk. Penetrating deep into the disk, the field of scattered X-ray photons with energy E10E\gtrsim10\,keV exerts a significant influence on the vertical structure of the accretion disk at a distance R1010R\gtrsim10^{10}\,cm from the neutron star. At a distance R1011R\sim10^{11}\,cm, where the total surface density in the disk reaches Σ020\Sigma_0\sim20\,g\,cm2^{-2}, X-ray heating affects all layers of an optically thick disk. The X-ray heating effect is enhanced significantly in the presence of an extended atmospheric layer with a temperature Tatm(2÷3)×106T_{atm}\sim(2\div3)\times10^6\,K above the accretion disk. We have derived simple analytic formulas for the disk heating by scattered X-ray photons using an approximate solution of the transfer equation by the Sobolev method. This approximation has a 10\gtrsim10\,% accuracy in the range of X-ray photon energies E<20E<20\,keV.Comment: 19 pages, 8 figures, published in Astronomy Letter

    Synchronization and Timing in CMS HCAL

    Get PDF
    The synchronization and timing of the hadron calorimeter (HCAL) for the Compact Muon Solenoid has been extensively studied with test beams at CERN during the period 2003-4, including runs with 40 MHz structured beam. The relative phases of the signals from different calorimeter segments are timed to 1 ns accuracy using a laser and equalized using programmable delay settings in the front-end electronics. The beam was used to verify the timing and to map out the entire range of pulse shapes over the 25 ns interval between beam crossings. These data were used to make detailed measurements of energy-dependent time slewing effects and to tune the electronics for optimal performance

    Energy Response and Longitudinal Shower Profiles Measured in CMS HCAL and Comparison With Geant4

    Get PDF
    The response of the CMS combined electromagnetic and hadron calorimeter to beams of pions with momenta in the range 5-300 GeV/c has been measured in the H2 test beam at CERN. The raw response with the electromagnetic compartment calibrated to electrons and the hadron compartment calibrated to 300 GeV pions may be represented by sigma = (1.2) sqrt{E} oplus (0.095) E. The fraction of energy visible in the calorimeter ranges from 0.72 at 5 GeV to 0.95 at 300 GeV, indicating a substantial nonlinearity. The intrinsic electron to hadron ratios are fit as a function of energy and found to be in the range 1.3-2.7 for the electromagnetic compartment and 1.4-1.8 for the hadronic compartment. The fits are used to correct the non-linearity of the e pi response to 5% over the entire measured range resulting in a substantially improved resolution at low energy. Longitudinal shower profile have been measured in detail and compared to Geant4 models, LHEP-3.7 and QGSP-2.8. At energies below 30 GeV, the data, LHEP and QGSP are in agreement. Above 30 GeV, LHEP gives a more accurate simulation of the longitudinal shower profile

    Design, performance, and calibration of the CMS hadron-outer calorimeter

    Full text link

    Design, Performance, and Calibration of CMS Hadron-Barrel Calorimeter Wedges

    Get PDF
    Extensive measurements have been made with pions, electrons and muons on four production wedges of the Compact Muon Solenoid (CMS) hadron barrel (HB) calorimeter in the H2 beam line at CERN with particle momenta varying from 20 to 300 GeV/c. Data were taken both with and without a prototype electromagnetic lead tungstate crystal calorimeter (EB) in front of the hadron calorimeter. The time structure of the events was measured with the full chain of preproduction front-end electronics running at 34 MHz. Moving-wire radioactive source data were also collected for all scintillator layers in the HB. These measurements set the absolute calibration of the HB prior to first pp collisions to approximately 4%

    A unifying view of Gamma Ray Burst Afterglows

    Get PDF
    We selected a sample of 33 Gamma Ray Bursts (GRBs) detected by Swift, with known redshift and optical extinction at the host frame. For these, we constructed the de-absorbed and K-corrected X-ray and optical rest frame light curves. These are modelled as the sum of two components: emission from the forward shock due to the interaction of a fireball with the circum-burst medium and an additional component, treated in a completely phenomenological way. The latter can be identified, among other possibilities, as "late prompt" emission produced by a long lived central engine with mechanisms similar to those responsible for the production of the "standard" early prompt radiation. Apart from flares or re-brightenings, that we do not model, we find a good agreement with the data, despite of their complexity and diversity. Although based in part on a phenomenological model with a relatively large number of free parameters, we believe that our findings are a first step towards the construction of a more physical scenario. Our approach allows us to interpret the behaviour of the optical and X-ray afterglows in a coherent way, by a relatively simple scenario. Within this context it is possible to explain why sometimes no jet break is observed; why, even if a jet break is observed, it is often chromatic; why the steepening after the jet break time is often shallower than predicted. Finally, the decay slope of the late prompt emission after the shallow phase is found to be remarkably similar to the time profile expected by the accretion rate of fall-back material (i.e. proportional to t^{-5/3}), suggesting that this can be the reason why the central engine can be active for a long time.Comment: 20 pages, 17 figures, Accepted for publication in MNRA

    Design, Performance, and Calibration of the CMS Hadron-Outer Calorimeter

    Get PDF
    The CMS hadron calorimeter is a sampling calorimeter with brass absorber and plastic scintillator tiles with wavelength shifting fibres for carrying the light to the readout device. The barrel hadron calorimeter is complemented with an outer calorimeter to ensure high energy shower containment in the calorimeter. Fabrication, testing and calibration of the outer hadron calorimeter are carried out keeping in mind its importance in the energy measurement of jets in view of linearity and resolution. It will provide a net improvement in missing \et measurements at LHC energies. The outer hadron calorimeter will also be used for the muon trigger in coincidence with other muon chambers in CMS
    corecore