A novel laccase from fresh fruiting bodies of the wild medicinal mushroom Tricholoma matsutake

The knowledge about biological activities of constituents from medicinal mushrooms belonging to the genus Tricholoma is limited. A 59-kDa laccase has now been purified from fresh fruiting bodies of the mushroom Tricholoma matsutake. The purification protocol entailed ion exchange chromatography on DEAE-cellulose, affinity chromatography on Affi-gel blue gel, ion exchange chromatography on CM-cellulose, affinity chromatography on ConA-Sepharose, and gel filtration by fast protein liquid chromatography on Superdex 75. Of the various affinity and ion exchange chromatographic media employed, the laccase bound only on Con A-Sepharose. The activity of the laccase did not undergo major changes over the temperature range 20-80°C. However, all activity vanished following exposure to 100°C for 10 minutes. The enzyme activity varied only slightly over the pH range 3-5, with the optimal pH of 5, but exhibited a precipitous decline when the pH was increased to 6, and was undetectable at pH 8 and 9. The laccase showed activity in the decolorization of azo dyes without a mediator. Its N-terminal sequence demonstrated only slight resemblance to those of other mushroom laccases. The newly described laccase is distinctive from the previously isolated Tricholoma mushroom laccases in a number of aspects

Metallic skeleton promoted two-phase durable icephobic layers

HypothesisThe accretion of ice on component surfaces often causes severe impacts or accidents in modern industries. Applying icephobic surface is considered as an effective solution to minimise the hazards. However, the durability of the current icephobic surface and coatings for long-term service remains a great challenge. Therefore, it is indeed to develop new durable material structures with great icephobic performance.ExperimentsA new design concept of combining robust porous metallic skeletons and icephobic filling was proposed. Nickel/polydimethylsiloxane (PDMS) two-phase layer was prepared using porous Ni foam skeletons impregnated with PDMS as filling material by a two-step method.FindingsGood icephobicity and mechanical durability have been verified. Under external force, micro-cracks could easily initiate at the ice/solid interface due to the small surface cavities and the difference of local elastic modulus between the ice and PDMS, which would promote the ice fracture and thus lead to low ice adhesion strength. The surface morphology and icephobicity almost remain unchanged after water-sand erosion, showing greatly improved mechanical durability. By combining the advantages of the mechanical durability of porous Ni skeleton and the icephobicity of PDMS matrix, the Ni foam/PDMS two-phase layer demonstrates great potentials for ice protection with long-term service time

A novel laccase from fresh fruiting bodies of the wild medicinal mushroom Tricholoma matsutake

The knowledge about biological activities of constituents from medicinal mushrooms belonging to the genus Tricholoma is limited. A 59-kDa laccase has now been purified from fresh fruiting bodies of the mushroom Tricholoma matsutake. The purification protocol entailed ion exchange chromatography on DEAE-cellulose, affinity chromatography on Affi-gel blue gel, ion exchange chromatography on CM-cellulose, affinity chromatography on ConA-Sepharose, and gel filtration by fast protein liquid chromatography on Superdex 75. Of the various affinity and ion exchange chromatographic media employed, the laccase bound only on Con A-Sepharose. The activity of the laccase did not undergo major changes over the temperature range 20-80°C. However, all activity vanished following exposure to 100°C for 10 minutes. The enzyme activity varied only slightly over the pH range 3-5, with the optimal pH of 5, but exhibited a precipitous decline when the pH was increased to 6, and was undetectable at pH 8 and 9. The laccase showed activity in the decolorization of azo dyes without a mediator. Its N-terminal sequence demonstrated only slight resemblance to those of other mushroom laccases. The newly described laccase is distinctive from the previously isolated Tricholoma mushroom laccases in a number of aspects

Research on sliding mode controller of the high-speed maglev train under aerodynamic load

The high-speed maglev train will be subjected to extremely obvious aerodynamic load and instantaneous aerodynamic impact during passing another train, which brings significant challenges to the train's suspension stability and safe operation. It's necessary to consider the influence of aerodynamic load and shock waves in the design of suspension control algorithms. Traditional proportion integration differentiation (PID) control cannot follow the change of vehicle parameters or external disturbance, which is easy to cause suspension fluctuation and instability. To improve the suspension stability and vibration suppression of the high-speed maglev train under aerodynamic load and impact, we design a siding mode controller introducing the primary suspension's deformation to replace the aerodynamic load on the electromagnet. Furthermore, we establish the train's dynamic simulation model with three vehicles and compare the designed controller and the PID controller for their performance in controlling the model suspension stability in the presence of the train operating in open air. Simulation results show that the sliding mode control (SMC) method proposed in this paper can effectively restrain the electromagnet fluctuation of the train under aerodynamic loads

High level expression of a novel family 3 neutral β-xylosidase from Humicola insolens Y1 with high tolerance to D-xylose.

A novel β-xylosidase gene of glycosyl hydrolase (GH) family 3, xyl3A, was identified from the thermophilic fungus Humicola insolens Y1, which is an innocuous and non-toxic fungus that produces a wide variety of GHs. The cDNA of xyl3A, 2334 bp in length, encodes a 777-residue polypeptide containing a putative signal peptide of 19 residues. The gene fragment without the signal peptide-coding sequence was cloned and overexpressed in Pichia pastoris GS115 at a high level of 100 mg/L in 1-L Erlenmeyer flasks without fermentation optimization. Recombinant Xyl3A showed both β-xylosidase and α-arabinfuranosidase activities, but had no hydrolysis capacity towards polysaccharides. It was optimally active at pH 6.0 and 60°C with a specific activity of 11.6 U/mg. It exhibited good stability over pH 4.0-9.0 (incubated at 37°C for 1 h) and at temperatures of 60°C and below, retaining over 80% maximum activity. The enzyme had stronger tolerance to xylose than most fungal GH3 β-xylosidases with a high Ki value of 29 mM, which makes Xyl3A more efficient to produce xylose in fermentation process. Sequential combination of Xyl3A following endoxylanase Xyn11A of the same microbial source showed significant synergistic effects on the degradation of various xylans and deconstructed xylo-oligosaccharides to xylose with high efficiency. Moreover, using pNPX as both the donor and acceptor, Xyl3A exhibited a transxylosylation activity to synthesize pNPX2. All these favorable properties suggest that Xyl3A has good potential applications in the bioconversion of hemicelluloses to biofuels

Wide linear range and highly sensitive flexible pressure sensor based on multistage sensing process for health monitoring and human-machine interfaces

Flexible pressure sensors have promising applications in wearable electronic devices. However, fabricating flexible pressure sensors with wide linear range and high sensitivity remain a great challenge. Herein, a micro-nano hybrid conductive elastomer film based on carbon materials with arched micro-patterns array on surface (P-HCF) is developed to show expected sensing properties through a sustainable route. The 1D carbon fibers (CFs) and 0D carbon nanoparticles (CNPs) were incorporated into polydimethylsiloxane (PDMS) matrix to construct a 3D conductive network consisting of physical contact and tunneling effect among carbon materials to improve the sensing range and sensitivity. The arched micro-patterns of the P-HCF, which is designed mimicking the human fingerprints, influences the pressure distribution inside the material, giving rise to a linear sensitivity over the whole sensing range. Finite element analysis (FEA) method is investigated to simulate and analyze the compression process. The P-HCF sensor exhibits both a high sensitivity of 26.6 kPa(-1) and an exceptionally wide linear range of 20 Pa - 600 kPa. The devices were demonstrated in monitoring artery pulses, assisting in diagnosing Parkinson?s disease, and analyzing gait for healthcare. Furthermore, the sensors are integrated into complex devices to realize pressure distribution detection, controlling manipulator, and operating PC games. The attainment of excellent pressure sensing performance of the P-HCF, potentially initiates vast applications in health monitoring and human-machine interfaces

Improved Electrical and Thermal Conductivities of Graphene–Carbon Nanotube Composite Film as an Advanced Thermal Interface Material

Thermal management has become a crucial issue for the rapid development of electronic devices, and thermal interface materials (TIMs) play an important role in improving heat dissipation. Recently, carbon−based TIMs, including graphene, reduced graphene oxide, and carbon nanotubes (CNTs) with high thermal conductivity, have attracted great attention. In this work, we provide graphene−carbon nanotube composite films with improved electrical and thermal conductivities. The composite films were prepared from mixed graphene oxide (GO) and CNT solutions and then were thermally reduced at a temperature greater than 2000 K to form a reduced graphene oxide (rGO)/CNT composite film. The added CNTs connect adjacent graphene layers, increase the interlayer interaction, and block the interlayer slipping of graphene layers, thereby improving the electrical conductivity, through−plane thermal conductivity, and mechanical properties of the rGO/CNT composite film at an appropriate CNT concentration. The rGO/CNT(4:1) composite film has the most desired properties with an electrical conductivity of ~2827 S/cm and an in−plane thermal conductivity of ~627 W/(m·K). The produced rGO/CNT composite film as a TIM will significantly improve the heat dissipation capability and has potential applications in thermal management of electronics