1,019 research outputs found

    How to measure redshift-space distortions without sample variance

    Full text link
    We show how to use multiple tracers of large-scale density with different biases to measure the redshift-space distortion parameter beta=f/b=(dlnD/dlna)/b (where D is the growth rate and a the expansion factor), to a much better precision than one could achieve with a single tracer, to an arbitrary precision in the low noise limit. In combination with the power spectrum of the tracers this allows a much more precise measurement of the bias-free velocity divergence power spectrum, f^2 P_m - in fact, in the low noise limit f^2 P_m can be measured as well as would be possible if velocity divergence was observed directly, with rms improvement factor ~[5.2(beta^2+2 beta+2)/beta^2]^0.5 (e.g., ~10 times better than a single tracer for beta=0.4). This would allow a high precision determination of f D as a function of redshift with an error as low as 0.1%. We find up to two orders of magnitude improvement in Figure of Merit for the Dark Energy equation of state relative to Stage II, a factor of several better than other proposed Stage IV Dark Energy surveys. The ratio b_2/b_1 will be determined with an even greater precision than beta, producing, when measured as a function of scale, an exquisitely sensitive probe of the onset of non-linear bias. We also extend in more detail previous work on the use of the same technique to measure non-Gaussianity. Currently planned redshift surveys are typically designed with signal to noise of unity on scales of interest, and are not optimized for this technique. Our results suggest that this strategy may need to be revisited as there are large gains to be achieved from surveys with higher number densities of galaxies.Comment: 22 pages, 13 figure

    A plasticity model for powder compaction processes incorporating particle deformation and rearrangement

    Get PDF
    This article is available open access through the publisher’s website at the link below. Copyright @ 2008 Elsevier Ltd.This paper develops a mechanistic model of granular materials that can be used with a commercial finite element package (ABAQUS). The model draws on the ideas of critical state soil mechanics and combines them with the theory of envelopes to develop an elasto-plastic model with a non-associated flow rule. The model incorporates both local deformation at the granule contacts, and rearrangement of the granules so that jointly they account for any bulk deformation. The mechanics of the model closely reflect the physicality of the material behaviour and the model parameters are closely linked (although not simplistically identical) to the characteristics of the granules. This not only gives an insight into the material behaviour, but also enables the model to be used to facilitate design of the material, its processing properties and, hence, component development. The model is used to simulate drained triaxial tests, settlement of a powder in a bin, and some examples of die pressing. Simulations are compared with experimental data and with predictions obtained using other models

    A united front against marine invaders: Developing a cost‐effective marine biosecurity surveillance partnership between government and industry

    Get PDF
    Successful detection of introduced marine pests (IMP) relies upon effective surveillance. However, the expedience of responding following IMP detection is often dependent upon the relationship between regulators and stakeholders. Effective detection of IMP in areas such as commercial ports requires a collaborative approach, as port environments can be highly complex both above and below the water. This complexity can encompass physical, logistical, safety and legislative issues. With this in mind, the aquatic pest biosecurity section within the Department of Primary Industries and Regional Development (DPIRD) developed the State‐Wide Array Surveillance Program (SWASP) in collaboration with Western Australian Port Authorities and port industry stakeholders. The SWASP is primarily based on passive settlement arrays for IMP detection. Arrays are deployed at strategic locations within Ports. Marine growth samples collected from the arrays are processed using Next‐Generation Sequencing (NGS) to identify the presence of IMP within a specific geographical location. Over 8 years, participation in SWASP has grown from 3 to 11 ports, spanning over 11,000 km, from the tropical north to temperate south of Western Australia. The programme has proven to be highly effective as a means of fostering stakeholder involvement and, importantly for IMP surveillance. The growth and success of SWASP has continued primarily because of the commitment and farsightedness of the ports involved. The regular presence of the biosecurity regulator as a partner in SWASP has provided a consistent face for biosecurity and fostered good stakeholder relationships, ensuring there is a reliable and effective ongoing marine surveillance programme for the state. Synthesis and applications. Through a united and collaborative approach to marine biosecurity surveillance, port authorities, industry and biosecurity regulators have developed the State‐Wide Array Surveillance Program (SWASP) and closed a major gap in biosecurity surveillance. The SWASP collaboration uses passive settlement arrays and molecular analyses to provide regular marine pest surveillance from the tropics to temperate regions of Western Australia. The continued commitment has embedded valuable relationships between stakeholder and regulator ensuring ongoing surveillance in marine biosecurity for the state. The Western Australian SWASP example has inspired other jurisdictions around Australia to develop similar collaborative approaches which will have far‐reaching marine biosecurity benefits

    Cosmological Effects of Radion Oscillations

    Full text link
    We show that the redshift of pressureless matter density due to the expansion of the universe generically induces small oscillations in the stabilized radius of extra dimensions (the radion field). The frequency of these oscillations is proportional to the mass of the radion and can have interesting cosmological consequences. For very low radion masses mbm_b (mb10100H01032eVm_b\sim10-100 H_0\simeq10^{-32} eV) these low frequency oscillations lead to oscillations in the expansion rate of the universe. The occurrence of acceleration periods could naturally lead to a resolution of the coincidence problem, without need of dark energy. Even though this scenario for low radion mass is consistent with several observational tests it has difficulty to meet fifth force constraints. If viewed as an effective Brans-Dicke theory it predicts ω=1+1D\omega=-1+\frac{1}{D} (DD is the number of extra dimensions), while experiments on scales larger than 1mm1mm imply ω>2500\omega>2500. By deriving the generalized Newtonian potential corresponding to a massive toroidally compact radion we demonstrate that Newtonian gravity is modified only on scales smaller than mb1m_b^{-1}. Thus, these constraints do not apply for mb>103eVm_b>10^{-3} eV (high frequency oscillations) corresponding to scales less than the current experiments (0.3mm0.3mm). Even though these high frequency oscillations can not resolve the coincidence problem they provide a natural mechanism for dark matter generation. This type of dark matter has many similarities with the axion.Comment: Accepted in Phys. Rev. D. Clarifying comments added in the text and some additional references include

    Equation of State of Oscillating Brans-Dicke Scalar and Extra Dimensions

    Full text link
    We consider a Brans-Dicke scalar field stabilized by a general power law potential with power index nn at a finite equilibrium value. Redshifting matter induces oscillations of the scalar field around its equilibrium due to the scalar field coupling to the trace of the energy momentum tensor. If the stabilizing potential is sufficiently steep these high frequency oscillations are consistent with observational and experimental constraints for arbitrary value of the Brans-Dicke parameter ω\omega. We study analytically and numerically the equation of state of these high frequency oscillations in terms of the parameters ω\omega and nn and find the corresponding evolution of the universe scale factor. We find that the equation of state parameter can be negative and less than -1 but it is not related to the evolution of the scale factor in the usual way. Nevertheless, accelerating expansion is found for a certain parameter range. Our analysis applies also to oscillations of the size of extra dimensions (the radion field) around an equilibrium value. This duality between self-coupled Brans-Dicke and radion dynamics is applicable for ω=1+1/D\omega= -1 + 1/D where D is the number of extra dimensions.Comment: 10 two-column pages, RevTex4, 8 figures. Added clarifying discussions, new references. Accepted in Phys. Rev. D (to appear

    Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification

    Get PDF
    Unmodified, Na-modified, and Sr-modified castings of Al-7 pct Si and Al-12.5 pct Si alloys were cast in molds in which it was possible to create different cooling conditions. It is shown how solidification influences the distribution of porosity at the surface and the center of the castings as a function of modification and Si content in sand- and chill-cast samples. Eutectic modification, Si content, and cooling conditions have a great impact on the distribution of porosity. Unmodified and Na-modified castings are more easily fed with porosity tending to congregate near the centerline of the casting, while Sr-modified castings solidify in a mushy manner that creates a more homogeneous distribution of porosity in the casting. The amount of porosity was highest in the Sr-modified alloys, lower in the Na-modified alloys, and lowest in the unmodified alloys. The size of the porosity-free layer and the effectiveness of the feeders were greater in the castings made with the steel chills due to the increased thermal gradients and consequent increase in the directionality of solidification

    Long-term experimental evolution decouples size and production costs in Escherichia coli

    Get PDF
    Body size covaries with population dynamics across life’s domains. Metabolism may impose fundamental constraints on the coevolution of size and demography, but experimental tests of the causal links remain elusive. We leverage a 60,000-generation experiment in which Escherichia coli populations evolved larger cells to examine intraspecific metabolic scaling and correlations with demographic parameters. Over the course of their evolution, the cells have roughly doubled in size relative to their ancestors. These larger cells have metabolic rates that are absolutely higher, but relative to their size, they are lower. Metabolic theory successfully predicted the relations between size, metabolism, and maximum population density, including support for Damuth’s law of energy equivalence, such that populations of larger cells achieved lower maximum densities but higher maximum biomasses than populations of smaller cells. The scaling of metabolism with cell size thus predicted the scaling of size with maximum population density. In stark contrast to standard theory, however, populations of larger cells grew faster than those of smaller cells, contradicting the fundamental and intuitive assumption that the costs of building new individuals should scale directly with their size. The finding that the costs of production can be decoupled from size necessitates a reevaluation of the evolutionary drivers and ecological consequences of biological size more generally.Dustin J. Marshall, Martino Malerba, Thomas Lines, Aysha L. Sezmis, Chowdhury M. Hasan, Richard E. Lenski, and Michael J. McDonal

    On the Potts model partition function in an external field

    Full text link
    We study the partition function of Potts model in an external (magnetic) field, and its connections with the zero-field Potts model partition function. Using a deletion-contraction formulation for the partition function Z for this model, we show that it can be expanded in terms of the zero-field partition function. We also show that Z can be written as a sum over the spanning trees, and the spanning forests, of a graph G. Our results extend to Z the well-known spanning tree expansion for the zero-field partition function that arises though its connections with the Tutte polynomial

    Snipe taxonomy based on vocal and non-vocal sound displays: the South American Snipe is two species

    Get PDF
    We analysed breeding sounds of the two subspecies of South American Snipe Gallinago paraguaiae paraguaiae and Gallinago paraguaiae magellanica to determine whether they might be different species: loud vocalizations given on the ground, and the tail‐generated Winnow given in aerial display. Sounds of the two taxa differ qualitatively and quantitatively. Both taxa utter two types of ground call. In G. p. paraguaiae, the calls are bouts of identical sound elements repeated rhythmically and slowly (about five elements per second (Hz)) or rapidly (about 11 Hz). One call of G. p. magellanica is qualitatively similar to those of G. p. paraguaiae but sound elements are repeated more slowly (about 3 Hz). However, its other call type differs strikingly: it is a bout of rhythmically repeated sound couplets, each containing two kinds of sound element. The Winnow of G. p. paraguaiae is a series of sound elements that gradually increase in duration and energy; by contrast, that of G. p. magellanica has two or more kinds of sound element that roughly alternate and are repeated as sets, imparting a stuttering quality. Sounds of the related Puna Snipe (Gallinago andina) resemble but differ quantitatively from those of G. p. paraguaiae. Differences in breeding sounds of G. p. paraguaiae and G. p. magellanica are strong and hold throughout their geographical range. Therefore we suggest that the two taxa be considered different species: G. paraguaiae east of the Andes in much of South America except Patagonia, and G. magellanica in central and southern Chile, Argentina east of the Andes across Patagonia, and Falklands/Malvinas.Fil: Miller, Edward H.. Memorial University Of Newfoundland; CanadáFil: Areta, Juan Ignacio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Salta. Instituto de Bio y Geociencias del NOA. Universidad Nacional de Salta. Facultad de Ciencias Naturales. Museo de Ciencias Naturales. Instituto de Bio y Geociencias del NOA; ArgentinaFil: Jaramillo, Alvaro. San Francisco Bay Bird Observatory; Estados UnidosFil: Imberti, Santiago. Asociación Ambiente Sur, Rio Gallegos; ArgentinaFil: Matus, Ricardo. Kilómetro 7 Sur; Chil

    Multilocal programming and applications

    Get PDF
    Preprint versionMultilocal programming aims to identify all local minimizers of unconstrained or constrained nonlinear optimization problems. The multilocal programming theory relies on global optimization strategies combined with simple ideas that are inspired in deflection or stretching techniques to avoid convergence to the already detected local minimizers. The most used methods to solve this type of problems are based on stochastic procedures and a population of solutions. In general, population-based methods are computationally expensive but rather reliable in identifying all local solutions. In this chapter, a review on recent techniques for multilocal programming is presented. Some real-world multilocal programming problems based on chemical engineering process design applications are described.Fundação para a Ciência e a Tecnologia (FCT
    corecore