Thermal Behavior of Estonian Graptolite–Argillite from Different Deposits

Graptolite–argillites (black shales) are studied as potential source of different metals. In the processing technologies of graptolite–argillites, a preceding thermal treatment is often applied. In this study, the thermal behavior of Estonian graptolite–argillite (GA) samples from Toolse, Sillamäe and Pakri areas were studied using a Setaram Labsys Evo 1600 thermoanalyzer coupled with the Pfeiffer OmniStar Mass Spectrometer. The products of thermal treatment were studied by XRD, FTIR, and SEM analytical methods. The experiments were carried out under non-isothermal conditions of up to 1200 °C at different heating rates in the atmosphere containing 79% Ar and 21% O2. The differential isoconversional Friedman method was applied for calculating the kinetic parameters. All studied GA samples are characterized with high content of orthoclase (between 38.0 and 57.3%) and quartz (between 23.8 and 35.5%), and with lower content of muscovite, jarosite, pyrite, etc. The content of organic carbon in GA samples studied varied between 7.3 and 14.2%. The results indicated that, up to 200 °C, the emission of hygroscopic and physically bound water takes place. Between 200 °C and 500–550 °C, this is followed by thermo-oxidative decomposition of organic matter. The first step of thermo-oxidation of pyrite with the emission of water, carbon and sulphur dioxide, nitrogen oxides, and different hydrocarbon fragments indicated the complicated composition of organic matter. At higher temperatures, between 550 °C and 900 °C, the transformations continued by dehydroxylation processes in clay minerals, and the decomposition of jarosite and carbonates took place. At temperatures above 1000–1050 °C, a slow increase in the emission of sulphur dioxide followed, indicating the beginning of the second step of thermo-oxidative decomposition of pyrite, which was not completed for temperatures of up to 1000 °C. Kinetic calculations prove the complicated mechanism of thermal decomposition of GA samples: for Pakri GA samples, it occurs in two steps, and for Silllamäe and Toolse GA samples, it occurs in three steps. Preliminary tests for the estimation of the influence of pre-roasting of GA samples on the solubility of different elements contained in GA at the following leaching in sulphuric acid is based on Toolse GA sample

Study of Thermooxidation of Oil Shale Samples and Basics of Processes for Utilization of Oil Shale Ashes

A circular economy becomes an object of actual discussions as a real alternative to the existing linear economy system. The problem is actually in Estonia also, first of all in the sector of heat and power production which based mainly on the combustion of local solid fossil fuel—Estonian oil shale (OS) resulting in the formation of ~5–6 million tons of OS ashes annually. The thermooxidative decomposition of OS samples from different deposits and estimation of the possibilities of utilization of OS ashes formed at both—pulverized firing (PF) and circulating fluidized bed combustion (CFBC) of Estonian OS were studied. The thermal analysis combined with evolved gas analysis (EGA) methods like Fourier transform infrared (FTIR) and mass-spectroscopy (MS) was exploited. It was established that the differences in the thermal behaviour of different OS samples are caused by the differences in the chemical matrix of organic matter, chemical and mineralogical composition of the inorganic part of OS, and morphology of samples. It was also found that moderate grinding of OS ashes with simultaneous moderate water treatment notably improved the SO2 binding efficiency of cyclone ash, and that the strength and leachability characteristics of granulated OS ashes strongly depend on the post-granulation treatment conditions allowing to increase the soil neutralizing ability of the granulated products. This overview was based on our investigations carried out during the last fifteen years

Study of Thermooxidation of Oil Shale Samples and Basics of Processes for Utilization of Oil Shale Ashes

A circular economy becomes an object of actual discussions as a real alternative to the existing linear economy system. The problem is actually in Estonia also, first of all in the sector of heat and power production which based mainly on the combustion of local solid fossil fuel—Estonian oil shale (OS) resulting in the formation of ~5–6 million tons of OS ashes annually. The thermooxidative decomposition of OS samples from different deposits and estimation of the possibilities of utilization of OS ashes formed at both—pulverized firing (PF) and circulating fluidized bed combustion (CFBC) of Estonian OS were studied. The thermal analysis combined with evolved gas analysis (EGA) methods like Fourier transform infrared (FTIR) and mass-spectroscopy (MS) was exploited. It was established that the differences in the thermal behaviour of different OS samples are caused by the differences in the chemical matrix of organic matter, chemical and mineralogical composition of the inorganic part of OS, and morphology of samples. It was also found that moderate grinding of OS ashes with simultaneous moderate water treatment notably improved the SO2 binding efficiency of cyclone ash, and that the strength and leachability characteristics of granulated OS ashes strongly depend on the post-granulation treatment conditions allowing to increase the soil neutralizing ability of the granulated products. This overview was based on our investigations carried out during the last fifteen years