Hospital autopsy for prevention of sudden cardiac death

In the past 20 years, cardiovascular mortality has decreased in highincome countries in response to the adoption of preventive measures to reduce the burden of coronary artery disease and heart failure. Despite these encouraging results, cardiovascular diseases are responsible for approximately 17 million deaths every year in the world, approximately 25% of which are sudden cardiac death. The risk of sudden cardiac death is higher in men than in women, and it increases with age due to the higher prevalence of coronary artery disease in older age. Accordingly, the sudden cardiac death rate is estimated to range from 1.40 per 100 000 person-years in women to 6.68 per 100 000 person-years in men. Sudden cardiac death in younger individuals has an estimated incidence of 0.46\u20133.7 events per 100 000 person-years, corresponding to a rough estimate of 1100\u20139000 deaths in Europe and 800\u20136200 deaths in the USA every year. Cardiac diseases associated with sudden cardiac death differ in young vs. older individuals. In the young there is a predominance of channelopathies and cardiomyopathies, myocarditis and substance abuse, while in older populations, chronic degenerative diseases predominate. In younger persons, the cause of sudden cardiac death may be elusive even after autopsy, because conditions such as inherited channelopathies or drug-induced arrhythmias that are devoid of structural abnormalities are epidemiologically relevant in this age group. Identification of the cause of an unexpected death provides the family with partial understanding and rationalization of the unexpected tragedy, which facilitates the coping process and allows an understanding of whether the risk of sudden death may extend to family members. Accordingly, author present their experience with autopsies of unexplained sudden death young victims in which a cardiac origin was suspected and the relevance of a standardized protocol for heart examination and histological sampling, as well as for toxicology and molecular investigation

Hot foam and hot water for weed control: a comparison

Thermal weed control plays an important role in managing weeds in synthetic herbicide-free systems, particularly in organic agriculture and in urban areas where synthetic herbicides are prohibited. This study compares the impact on weed control of increased doses of hot water and hot foam (i.e. 0, 0.67, 1.67, 3.33, 5.00, 6.67 and 8.33 kg m–2). The doses were applied using the same machine. The temperatures, weed control effectiveness, weed regrowth after the death of the aboveground vegetative weed tissues, and weed dry biomass 30 days after the treatments were studied in two experimental fields with a different weed composition (i.e. Site I and Site II). The results showed that difficult weeds to control, such as Cynodon dactylon (L.) Pers., Digitaria sanguinalis (L.) Scop. and Taraxacum officinale Weber, like all the other species in the initial weed populations in the two experiments, died after lower doses of hot foam compared to hot water. Adding foam to hot water made it possible to lower the required dose of water by at least 2.5-fold compared to hot water used alone. By insulating the weeds, the foam led to higher peak temperatures and slower temperature decay, thus determining an effective weed control with lower doses compared to hot water. Starting from 11 days and 16 days after treatments (for Site I and Site II, respectively), there were no statistically significant differences in weed regrowth between hot foam and hot water at all the doses applied. There were no differences between the dry biomass of weeds collected 30 days after treatments when the same doses of hot foam and hot water were used

The influence of non-living mulch, mechanical and thermal treatments on weed population and yield of rainfed fresh-market tomato (Solanum lycopersicum L.)

Weed control is often a major limitation for vegetable crops, since compared to arable crops fewer herbicides are available and the crops are more sensitive to weeds. Field experiments were carried out in the province of Pisa (Central Italy) to determine the effect of two different mulches (black biodegradable plastic film and wheat straw) and mechanical and thermal treatments on weed population and yield of rain-fed fresh market tomato (Solanum lycopersicum L.). Rolling harrow, flaming machine and precision hoe for weed control, which were either built, enhanced or modified by the University of Pisa were used separately (mechanical-thermal strategy) or in combination with a straw mulch (mechanical-thermal-straw strategy). These two innovative strategies were compared with the traditional farming system, which uses a biodegradable plastic mulch film. The strategies were compared in terms of machine performance, weed density, total labour requirement, weed dry biomass, and crop fresh yield at harvest. The total operative time for weed control was on average ~25 h ha-1 for the two systems, which included mulching, and over 30 h ha-1 for the mechanical-thermal strategy. The three strategies controlled weeds effectively, with only 30 g m-2 in each treatment. Tomato yield, however, was 35% higher for strategies that included mulching (both biodegradable film and straw)

The use of different hot foam doses for weed control

Thermal weed control technology plays an important role in managing weeds in synthetic herbicide-free systems, particularly in organic agriculture. The use of hot foam represents an evolution of the hot water weed control thermal method, modified by the addition of biodegradable foaming agents. The aim of this study was to test the weeding eect of dierent five hot foam doses, in two sites of dierent weed composition fields [i.e., Festuca arundinacea (Schreb.), Taraxacum ocinale (Weber) and Plantago lanceolata (L.)], by evaluating the devitalisation of weeds, their regrowth, the weed dry biomass at the end of the experiment and the temperature of hot foam as aected by dierent foam doses. The results showed that the eect of the hot foam doses diered with the dierent infested weed species experiments. In the Festuca arundinacea (Schreb.) infested field, all doses from 3.33 L m2 to 8.33 L m2 led to a 100% weed cover devitalisation and a lower weed dry biomass compared to the dose of 1.67 L m2, whereas the weed regrowth was similar when all doses were applied. In the Taraxacum ocinale (Weber) and Plantago lanceolata (L.) infested fields, doses from 5.00 L m2 to 8.33 L m2 in site I and from 3.33 L m2 to 8.33 L m2 in site II led to 100% of weed cover devitalisation. The highest doses of 6.67 L m2 and 8.33 L m2 led to a slower weed regrowth and a lower weed dry biomass compared to the other doses. The time needed for weeds to again cover 50%, after the 100% devitalisation, was, on average, one month when all doses were applied in the Festuca arundinacea (Schreb.) infested field, whereas in the Taraxacum ocinale (Weber) and Plantago lanceolata (L.) fields, this delay was estimated only when doses of 6.67 L m2 and 8.33 L m2 were used in site I and a dose of 8.33 L m2 in site II. Thus, in the Festuca arundinacea (Schreb.) field experiments hot foam doses from 3.33 L m2 to 8.33 L m2 were eective in controlling weeds, and the use of the lowest dose (i.e., 3.33 L m2) is recommended. However, for Taraxacum ocinale (Weber) and Plantago lanceolata (L.) the highest doses are recommended (i.e., 6.67 L m2 and 8.33 L m2), as these led to 100% weed devitalisation, slower regrowth, and lower weed dry biomass than other doses. A delay in the regrowth of weeds by 30 days can lead to the hypothesis that the future application of hot foam as a desiccant in no-till field bands, before the transplant of high-income vegetable crops, will provide a competitive advantage against weeds

Using flaming as an alternative method to vine suckering.

Suckering is the process of removing the suckers that grapevine trunks put out in the spring. Suckering by hand is costly and time consuming and requires constant bending down, getting up and making repetitive motions. The mechanical removal of suckers with rotating scourges can damage the vine plants. Chemical suckering is a limiting factor for wine grape growers interested in sustainable and/or organic agriculture. The aim of this research was to test flaming as an alternative method to vine suckering. A three-year experiment was conducted on a 10-year-old Sangiovese vine (775 Paulsen rootstock). The treatments consisted of flame suckering at different phenological stages, hand-suckering and a no-suckered control. Data on the number of suckers, grape yield components, and grape composition were collected and analysed. The results showed that flaming significantly reduced the initial number of suckers. This effect on the suckers was highest when the main productive shoots of the vines were at the 18-19 BBCH growth stage. Flame-suckering did not affect grape yield components and grape composition. Future studies could investigate the simultaneous use of flaming for both suckering and weed control

Flaming, glyphosate, hot foam and nonanoic acid for weed control: a comparison.

Synthetic herbicides are commonly used in weed management, however, 70 years of use has led to weed resistance and environmental concerns. These problems have led scientists to consider alternative methods of weed management in order to reduce the inputs and impacts of synthetic herbicides. The aim of this experiment was to test the level of weed control using four weeding methods: glyphosate applied at an ultra-low volume, the organic herbicide nonanoic acid, flaming, and hot foam. The results showed that weed control was eective only when flaming and hot foam were applied (99% and 100% weed control, respectively). Nonanoic acid at a dose of 11 kg a.i. ha1 diluted in 400 L of water did not control developed plants of Cyperus esculentus (L.), Convolvulus arvensis (L.) and Poa annua (L.). Glyphosate at a dose of 1080 g a.i. ha1 (pure product) only controlled P. annua (L.), but had no eect on C. esculentus (L.) and C. arvensis (L.). After the aboveground tissues of weeds had died, regrowth began earlier after flaming compared to hot foam. There was no regrowth of P. annua (L.) only after using hot foam and glyphosate. Hot foam was generally better at damaging the meristems of the weeds. In one of the two experiment sites, significantly more time was needed after the hot foam to recover 10% and 50% of the ground compared to flaming. The time needed to recover 90% of the ground was on average 26–27 days for flaming and hot foam, which is the time that is assumed to be required before repeating the application. A total of 29 days after the treatments, weeds were smaller after flaming, glyphosate and hot foam compared to nonanoic acid and the control, where they had more time to grow

An autonomous ground mobile unit for the precision physical weed control.

In this paper the design, the main characteristics and the automation systems of innovative autonomous ground mobile units (GMU) for physical weed control (PWC) in maize are described. The machine will be created within the activities of the European Project RHEA (Robot fleets for Highly Effective Agriculture and forestry management), that aims to produce different prototypes of autonomous terrestrial and aerial robot able to perform several activities related to the general crop protection in different agricultural scenarios. The first autonomous ground unit machine was designed in order to perform a mechanical and thermal treatment removing weeds from the inter-row crop space and applying in-row selective and precision flaming by means of two crossed LPG rod burners. By means of some modifications of the tools it will be possible to realize also an autonomous unit for the precision broadcast flaming application. In this case the design involves a replacement of the mechanical tools working in the inter-row space with 50 cm wide burners able to perform flaming at different intensities according to weed cover detected by the perception system of the robot. The working width of both the PWC machines will be of 4.5 m, thus covering five entire maize inter-row spaces of 0.75 m each and 2 half inter-row space of 0.375 m each. The correct position of the tools (mechanical and thermal) will be guaranteed by an automatic precision guidance system connected and supervised to an image based row detection system. Each working elements will be provided by two crossed 0.25 m wide rod burners, hitting one side of each crop row. The flame should hit the weeds growing in the “inrow” space (a 0.25 m wide strip of soil with the maize plant in the middle). Regarding the control of the weed emerged in the “inter-row” space each working unit of the will be provided with rigid tools (one central foot-goose and two side “L” shaped sweeps). The mechanical treatment will be performed, independently from the weed presence, as hoeing is a very important agronomical practice. On the contrary, broadcast flaming in the inter-row space will be performed after weed detection, using three different LPG pressures and doses according to weed cover (no weed cover-no treatment, weed cover between 0 and 25%-flaming at 0.3 MPa, weed cover higher than 25%-flaming at 0.4 MPa). This very innovative application of precision PWC in maize could represent not only a good opportunity for farmers in term of herbicide use reduction, but also an environmental friendly and energy saving application of flaming in organic farming

Combining roller crimpers and flaming for the termination of cover crops in herbicide-free no-till cropping systems

The termination of cover crops in conventional no-till systems is mostly conducted mechanically in combination with herbicides. Combining flaming and roller crimpers could be a viable solution to avoid using herbicides for cover crop termination in farming systems where herbicides are banned, or at least to reduce their use in an integrated management approach. This research tested the effects of flaming used in combination with three different types of roller crimpers to terminate a fall-sown cover crop mixture of winter pea and barley. The cover crop termination rate was visually assessed in terms of percentage of green cover provided by cover crop plants at different intervals from the termination date, and estimated using a log-logistic non-linear regression model with four parameters. Machine performance data are also reported. The results show that, irrespective of the roller type, flaming significantly boosted the effect of the roller crimpers. In fact, an economic threshold for cover crop suppression of 85% was reached only when the rollers were used in combination with flaming. Nevertheless, none of the methods were able to reach the 100% of cover crop suppression. In some case, the combined use of flaming and roller crimpers allowed reaching the 90% of cover crop devitalisation, which happened six weeks after the termination date. More importantly, the use of flaming in combination with rollers shortened the time needed to achieve the estimated levels of devitalisation, compared with the rollers used alone. We conclude that flaming is an effective tool to increase the effectiveness of roller crimpers. Nevertheless, further research is needed to identify solutions to overcome the barrier of the high operational costs of flaming, which is constraining its wider adoption by farmers. Future studies could focus, for instance, on the development of a new prototype of combined machine for crimping and flaming the cover crops simultaneously, which could potentially reduce the operational costs